Dg94-03500A/Z Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Hex Nut

4.9 (20)

By: Whirlpool

Part Number: WP33001443

This Hex Nut is a small but critical fastener used to secure brackets, panels, and internal assemblies in your appliance. Replacing a stripped, corroded, or missing nut restores a tight, rattle-free, and safe installation.

Threads onto a matching bolt or stud to clamp parts together
Helps maintain alignment and reduce vibration-related loosening
Commonly used on panels, brackets, supports, and internal assemblies
Replace when threads are damaged, hex flats are rounded, or hardware is missing
Symptoms can include loose or rattling components or hardware that won't stay tight

What's included: One hex nut. Install notes:

Disconnect power and, if applicable, shut off gas or water before servicing
Use the correct-size nut driver or wrench to avoid rounding the hex
Start the nut by hand to prevent cross-threading; tighten snugly without over-torquing
Inspect and replace any damaged mating bolt/stud or washer for a secure repair

Do-It-Yourself Stories from Customers like You The rollers needed to be replaced, the axles for the rollers needed to be replaced, the tension pulley roller needed to be replaced, the belt needed to be replaced Richard G. • El Paso , TX • December 18, 2018

It took me about 2 hours to take everything apart and get it back together & running again with no problems. All the parts I ordered were exactly what I needed to fix everything. Thank you all !!! Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.7 (14)

By: Whirlpool

Part Number: WP489483

The Screw is an OEM replacement part for Whirlpool appliances. The precise threads allow screws to join or assemble other parts securely.

Causes of a bad screw can include stripping, cracking, or loss of threads due to repeated installation/removal over time. Corrosion is also possible depending on environmental conditions.

Symptoms of a bad screw include:

Loosened or detached components that were once fastened
Reduced structural integrity of connections or assemblies
Potential safety hazards if critical parts become dislodged

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Missing hinges to hold the door up Sandra C. • Gardena , CA • June 05, 2016

Found the parts in the diagram of my fridge and simply installed it very easy Read more

$11.78

Compare At:: $14.14
You Save:: $2.36

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Appliance Fastener Screw

4.6 (13)

By: Whirlpool

Part Number: WPY014874

Factory fastener screw secures panels, brackets, and trim inside appliances. Replace missing, stripped, or damaged screws to restore tight fit.

Do-It-Yourself Stories from Customers like You Loud squealing noise William B. • Rocky Mount , NC • December 17, 2018

First replaced the drum rollers...that wasn't it..took dryer back apart and spun the belt tension wheel by hand (should have done this the first time I took the dryer apart) and it squeaked. so I ordered the full parts: wheel, idler arm, idler spring, arm sleeve, E ring..Put it back together and whoa..no more squealing!! Read more

$5.95

Compare At:: $7.02
You Save:: $1.07

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Light Bulb

4.7 (21)

By: Whirlpool

Part Number: W10857122

The Light Bulb is an OEM part for Whirlpool refrigerators. This part illuminates the water and ice dispenser area, providing visibility and ease of use, especially in low light conditions.

Over time, the light bulb can fail due to normal wear and tear, electrical surges, or damage from vibrations and impacts.

Symptoms of a bad light bulb include:

The dispenser area not lighting up when activated
Flickering or dim lighting
The bulb failing to turn on consistently

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You My dryer was making noise James M. • Middletown , RI • September 19, 2014

I went on line and purchased all of the possible parts that could be worn out. I spent less than the service guy wanted to show up...The online videos were spot on. Two hours and it works like new! One of the best values on the Internet! Read more

$13.47

Compare At:: $16.03
You Save:: $2.56

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Dryer Drum Tumbler Seal

4.7 (12)

By: Whirlpool

Part Number: WP33313541

Seals the gap between drum and bulkhead to maintain airflow and drying performance. Replace when worn to reduce noise and prevent snagging. Verify fit.

Do-It-Yourself Stories from Customers like You Normal wear and tear to my 25 year old maytag Kevin T. • Halls , TN • March 07, 2015

I replaced the seals and tub bushings to bring back a quieter operation and keep from doing more damage.I have done so since it was new in 1990. It still has a lot of kife left in it. And it beats buying a new unit any day. Read more

$37.95

Compare At:: $45.54
You Save:: $7.59

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Lp Gas Conversion Kit

4.8 (9)

By: Whirlpool

Part Number: MAL9000AXX

The LP Gas Conversion Kit is an OEM part for Whirlpool appliances. This kit allows for the conversion of natural gas appliances to use liquid propane (LP) gas. It includes all necessary components, such as orifices and instructions, to ensure a safe and efficient conversion.

Over time or due to specific needs, you might need to convert your appliance from natural gas to LP gas. Causes for needing this conversion include moving to an area where only LP gas is available or preferring LP gas due to its efficiency and environmental benefits.

Symptoms indicating the need for a gas conversion kit include:

Moving to a location that only supplies LP gas
Changing energy preferences for better efficiency
Appliances set up for natural gas needing adaptation to LP gas

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You I changed my dryer from ng to lp Dave F. • Kimbolton , OH • June 06, 2015

The kit was very simple it took longer to take the dryer apart than it did to do the change over and it works great thank you for you're product Read more

$49.51

Compare At:: $58.92
You Save:: $9.41

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Dryer Gas Valve With Coils

4.8 (11)

By: Whirlpool

Part Number: WP306176

Dryer not heating or flame goes out after a minute? This gas valve with coils restores heat. 15-minute repair with video guidance available.

Do-It-Yourself Stories from Customers like You Gas valve on gas dryer leaking Thomas R. • Stillwater , MN • January 10, 2017

Replaced valve had some trouble removing the fitting from the valve as the new fitting was slightly too large and had to be replaced with the fitting from the old valve. Used a large crescent wrench to grip the valve at the base and I was able to apply enough force to remove both fittings transferring old fitting to new valve. The instructions were detailed and excellent. The dryer is up and running fine. Read more

$233.24

Compare At:: $279.89
You Save:: $46.65

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.8 (4)

By: Whirlpool

Part Number: WP3390631

10 - 16 x 1/2

Do-It-Yourself Stories from Customers like You Agitator wasnt sloshing Paige B. • Clarksville , TN • January 30, 2015

I looked inside and saw the teeth were worn off the "dogs" so I purchased the Cam Agitator repair kit and a new bolt. Getting the old bolt out was the hardest part since it was worn and rusted. I ended up having to buy a set of socket extensions and a set of stripped bolt sockets so $45 in tools and it took me an hour to get the old bolt out but putting everything back together was a breeze. I was very proud of myself, as a woman, that I fixed this problem myself and didnt have to pay a repair... Read more

$7.48

Compare At:: $8.90
You Save:: $1.42

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Washer Spring Fastener Retaining Clip

5.0 (6)

By: Whirlpool

Part Number: WP22001650

Secures components with constant tension to prevent looseness and vibration. Replace if broken, fatigued, or missing. Verify fit with your model number.

This part fixes the following symptoms

Noisy

Do-It-Yourself Stories from Customers like You Drum guides had worn out Robert S. • North Apollo , PA • October 08, 2014

Replaced them. Read more

$9.63

Compare At:: $11.36
You Save:: $1.73

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Dryer Gas Burner Assembly

4.9 (14)

By: Whirlpool

Part Number: WP33002793

Dryer won't heat or flame cycles on and off? A warped burner assembly prevents reliable ignition. Moderate DIY repair restores even drying.

Do-It-Yourself Stories from Customers like You First look 2nd look 3rd look success!!!!! Kirk P. • Des Moines , IA • October 10, 2014

When I first looked at my dryer I thought it was my ignitor, on a closer look I found that about an inch of my burner assembly arm was laying in a corroded mess on the bottom pan of my dryer. I came online and found your website. After reviewing your parts I thought well I can probably get those local and with competive pricing. Wrong!! There are 3 appliance parts stores withing about 3 miles and I checked them all. Higher prices by 25-35% and longer wait times than your advertised... Read more

$109.41

Compare At:: $129.10
You Save:: $19.69

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Dryer Idler Bracket Spacer

4.9 (9)

By: Whirlpool

Part Number: WPW10116756

Maintains proper spacing and alignment in your dryer's belt path. Replace if you hear squeaking or notice belt tracking issues. Verify fit with your model.

Do-It-Yourself Stories from Customers like You The motor burned up after 28 years Robert M. • Paw Paw , MI • December 20, 2016

I replaced the motor and all other moving components along with the felt drum seals.drum glides and drive belt. The wiring instruction is where i had the most problems. Because my wiring had only 4 wires in the harness not 5, and one was a different color then the instructions call out, I believe was because it might have been and older model. the instruction called for a gray wire but mine was white with a blue piggy back wire attached. but after finding a few videos on line i figured that the... Read more

$34.23

Compare At:: $40.73
You Save:: $6.50

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Motor Clamp

5.0 (7)

By: Whirlpool

Part Number: WP660658

This part is a motor clamp. This is a genuine OEM part and has been sourced directly from the manufacturer. This part is intended to replace a deteriorated, damaged, or broken motor clamp on certain makes of indoor appliance models. Motor clamps are essential for properly securing the drive motor on various types of indoor appliances such as washers, dryers, and refrigerators. Without the use of a motor clamp, the drive motor is free to move around or become detached. This can easily cause serious damage to the equipment and prevent proper functionality. Proper tools are needed to replace this part and appropriate safety measures should be adhered to when working on any type of equipment. For accurate information on how and where to install this replacement motor clamp, specific manufacturer diagrams should be referred to.As an authentic replacement part, this motor clamp can be used on multiple different models of washers, dryers, refrigerators, and washer/dryer combos manufactured by Kenmore, Maytag, Whirlpool, and Amana. Please note that this motor clamp is a genuine part made of high-quality materials and is sold individually.

This part fixes the following symptoms

Noisy

Do-It-Yourself Stories from Customers like You The dryer motor stopped working. Kenneth M. P. • Saint Clair Shores , MI • December 05, 2021

I ordered a replacement motor from APP and installed it myself. Read more

$10.37

Compare At:: $12.44
You Save:: $2.07

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Dryer Blower Seal

4.5 (6)

By: Whirlpool

Part Number: WPY312901

Seals blower housing to prevent air leaks and lint escape. Replace when you notice lint buildup in your home or reduced drying efficiency. Confirm fit with your model number.

Do-It-Yourself Stories from Customers like You Making loud squealing sound when dryer was turned on Michael M. • Plainfield , IL • November 19, 2018

Took the front panel off (the door front), disconnected the connector to the door switch and used a wooden clothespin to bypass the door switch. Turned on the dryer to locate loud squeaking sound and found it was coming from the motor area. When I started to take the blower section apart from the motor, that is when I saw the "blower wheel" slipped off the motor shaft. The blower wheel has a "C" clip retainer and compression ring to keep it snug on the motor shaft (but it was loose). Now I... Read more

$49.25

Compare At:: $59.41
You Save:: $10.16

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Adjustable Leg

5.0 (5)

By: Whirlpool

Part Number: 22003428

Leg, adjustable (w/nut)

This part fixes the following symptoms

Shakes and moves

Do-It-Yourself Stories from Customers like You Needed new support adjustable legs for my maytag washer Rodger M. • San Clemente , CA • November 17, 2014

Took off the old parts and replaced with the new parts Read more

$16.95

Compare At:: $20.17
You Save:: $3.22

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Rubber Foot

5.0 (1)

By: Whirlpool

Part Number: WPY314137

The rubber foot is an OEM replacement part for Whirlpool washing machines. This small but essential component fits beneath the leveling legs, providing stability and preventing the appliance from moving or vibrating excessively during operation. It also protects flooring surfaces from potential scratches or damage.

Symptoms of a bad Leveling Leg Pad include:

Increased vibration or noise during the wash or spin cycle
The washing machine wobbling or becoming unsteady
Visible wear, cracks, or damage to the pad

Causes of a failing Leveling Leg Pad can include wear and tear from prolonged use, exposure to moisture, or excessive weight causing deformation. Replacing worn pads helps maintain the appliance's balance and efficiency.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For the leveling leg order W10176519.

Do-It-Yourself Stories from Customers like You Unlevel and shaking moving out of position cracked dryer igniter Steven B. • Grantsville , WV • April 26, 2016

Replaced dried crumbling rubber foot. Cleaned inside and outside of dryer before installing igniter cleared vent hose. Leveled unit installed dryer igniter. Fired it up.Runs Great Now. Read more

$7.95

Compare At:: $9.38
You Save:: $1.43

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Leveling Leg Pad

5.0 (8)

By: Whirlpool

Part Number: WP210684

The Leveling Leg Pad is an OEM replacement part for Whirlpool washing machines. This small but essential component fits beneath the leveling legs, providing stability and preventing the appliance from moving or vibrating excessively during operation. It also protects flooring surfaces from potential scratches or damage.

Symptoms of a bad Leveling Leg Pad include:

Increased vibration or noise during the wash or spin cycle
The washing machine wobbling or becoming unsteady
Visible wear, cracks, or damage to the pad

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For the leveling leg order 22003428.

This part fixes the following symptoms

Shakes and moves

Do-It-Yourself Stories from Customers like You Washer "bucking" while in spin cycle Luis P. • Loveland , CO • June 27, 2017

New leveler pads Read more

$11.78

Compare At:: $14.02
You Save:: $2.24

IN STOCK

Ships Monday Guaranteed

Add to Cart

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Dg94-03500A/Z Parts

Hex Nut

Screw

Appliance Fastener Screw

Light Bulb

Dryer Drum Tumbler Seal

Lp Gas Conversion Kit

Dryer Gas Valve With Coils

Screw

Washer Spring Fastener Retaining Clip

Dryer Gas Burner Assembly

Dryer Idler Bracket Spacer

Motor Clamp

Dryer Blower Seal

Adjustable Leg

Rubber Foot

Leveling Leg Pad