Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Drives drum rotation for even drying. Replace if dryer won't spin, makes squealing sounds, or clothes stay wet. Confirm fit with your model number.
From watching the video I got the general idea, disassemble 50% of the dryer. Only had 2 differences in my dryer from the one used in the video, so the video was helpful. The one difference was the connections to the front side of the dryer were on the power distribution circuit board located on the left of the dryer under a sheet metal cover. These were harder to disconnect with my fat thumbs. The bigger issue was with removing the front control panel. In the video there doesn't appear to be... Read more
Maintains belt tension in your dryer drum system. Replace if the pulley wheel is worn, cracked, seized, or the tensioner arm is bent or broken.
This thermal fuse is a safety device mounted on or near the blower housing inside the dryer. It is designed to blow and cut power to the dryer if the internal temperature exceeds a safe limit, preventing potential fire hazards. Replace this fuse if the dryer will not start or has no power at all - a blown thermal fuse is one of the most common reasons a dryer stops running completely.
You can do this! Although an Art Director by trade, I like working with my hands. I’m adept at working with tools and following instructions. In today’s disposable society, I prefer fixing things. That said, this has to be the easiest repair I’ve ever attempted with the largest cost-savings versus hiring a professional. My brand new dryer had been in use fewer than six months (average 6 loads per week) when suddenly the dryer would not heat. The drum would spin, there were no error codes, and... Read more
Supports and allows the dryer drum to rotate smoothly. Replace when roller bearing seizes, develops flat spots, or shows wear causing noise or drag.
I first researched on AppliancePartsPros.com the availability of parts. It looked like all common parts were in stock ready to ship. I also found that APP had several helpful videos to show how to take apart the dryer and replace the parts. Other research indicated the most common problem is the drum rollers, but after seeing the videos I determined that not only the rollers but also the tensioner pulley could be bad and the belt too. So I bought all of these parts because I did not want to... Read more
Dryer overheating or won't shut off? This high limit thermostat regulates temperature to prevent damage. Moderately easy DIY repair, 1-2 hours.
Replaced heating element and thermostat, took me about 2 hours but that's because i had to vacuum out the dryer inside and I also checked the fan before I closed the dryer back up. I have a Samsung DV448AAEP. Works great and saved my family money! Read more
The Dryer Moisture Sensor is a reliable component designed to ensure your dryer operates efficiently. This genuine OEM part accurately detects moisture levels in your laundry, allowing the dryer to adjust drying times automatically. By maintaining optimal moisture sensing, it helps prevent over-drying and energy waste, ultimately saving you time and reducing utility costs. Compatible with a wide range of Samsung dryer models, the Dryer Moisture Sensor guarantees a perfect fit and seamless integration into your appliance. Installing this sensor can restore your dryer's performance, ensuring your clothes are perfectly dried every cycle. Trust in this genuine OEM part to enhance the functionality and longevity of your Samsung dryer, providing you with dependable and efficient drying results.
I researched the issue on You tube and found out it could be either the "belt broke switch" or the Moisture sensor. A friend who was an appliance mechanic advised "since you have to take it all apart anyways, its best to replace the belt, spring, and Idler wheel" I bought the 5 item for $52. I watched the video on the AppliancePartsPros for changing out the belt and I replace all items on the list. Took 1 1/2 hrs and was fixed on restart!! * Wear gloves, the sheet metal is very sharp edges!* Read more
Holds the lint screen and channels exhaust air through the filter. Replace if cracked, broken, or no longer securely holding the screen. Verify fit by model.
Found AppliancePros online and identified parts. Parts ordered, received in a few days and installed parts. Easypeasy....! Thank You Dave Read more
Maintains tension on the idler pulley to keep the drum belt tight. Replace if the spring is stretched, broken, or missing to restore proper belt operation.
Replace your broken, cracked, or missing dryer control knob encoder assembly. Mounts to the front control panel for precise cycle selection control.
Ordered new control knob and replaced broken one. The most difficult part was popping out the control panel so I could access the control knob. I ended up "wrestling" it out. It would be wonderful if the product manual had some guidance on how to pop out all panels. Read more
Dryer won't start or keeps running with door open? The door switch detects door position for safe operation. DIY-friendly repair with video guide.
I am so blessed. I went online. Found the brackets. Watch the video for the brackets I chose. And lucky me. I did not have to pull the dishwasher out. The installer did not have it flush under the counter. So I was able to pull the dishwasher forward unhook the damage brackets and insert the new. Put the dishwasher back in. Two screws. Now the balanced and secure dishwasher washes better than ever and I did not have to pay an extraordinary fee for a repairman. I'm 68 and take care of a 72 year... Read more
Motor hums but won't start? Replace your dryer drive motor to fix startup failure. Moderate DIY repair with video guide. Restores drum rotation.
After watching the how to video twice I decided to embark on dismantling my dryer and attempting to replace my motor. After realizing that the main tool needed was a Phillips screwdriver I was sure I could handle this repair. One by one I took apart the dryer and spread out the parts throughout my mud room. 1.5 hrs later and I have a working dryer, and most of all a happy wife. Thanks for the speedy part delivery and the great how to video. Read more
Replaces broken or cracked lint filter cover on your dryer. Covers the filter opening when filter is removed to prevent clothes from entering the blower.
Dryer not heating? The igniter lights the gas burner to generate heat. This fragile ceramic part can crack or break during installation. DIY repair.
Replaced the following parts but did not fix the problem: -Thermister -Thermal fuse -Radiant sensor -Ignitor -Therm The problem was the Centrifugal switch. Took the switch apart and use fine grid sand paper to clean the contacts. Put it back and working. Read more
Secures the lint filter cover in your dryer. Replace if the spring is missing, broken, or damaged, causing the filter cover to not stay in place properly.
The Dryer Fan Motor Assembly is essential for maintaining optimal performance in your dryer. This genuine OEM part ensures reliable operation by replacing your existing faulty fan motor and blower assembly. Designed specifically for Samsung dryer models, it guarantees a perfect fit and seamless integration with your appliance. The motor and blower assembly work together to provide consistent airflow, enhancing drying efficiency and reducing drying times. By choosing this genuine OEM part, you are ensuring the longevity and proper functionality of your dryer. Installation is straightforward, allowing you to quickly restore your dryer to its full capabilities without the need for professional assistance. This assembly helps prevent overheating and reduces noise, contributing to a quieter and safer drying environment. Whether your current fan motor is worn out or damaged, the Dryer Fan Motor Assembly offers a dependable solution to keep your laundry routine running smoothly. Trust in a quality component that supports the durability and performance of your Samsung dryer for years to come.
Replaced dryer motor Read more
Dryer won't start or stops after a few seconds? The belt switch detects broken belts and prevents operation. Moderate DIY repair, 1-2 hours.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.