Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Sump to Water Inlet Hose is an OEM replacement part for Bosch dishwashers. This hose provides a pathway connecting the dishwasher's sump and water inlet valve. It allows the sump to fill with water during different dishwashing cycles, facilitating key functions like rinsing, spraying cycles, and final rinses. Proper connection between these components via this hose is required for the dishwasher to operate efficiently.
Causes of a faulty sump to water inlet hose include cracking, leaking, or kinking over repeated use and cycles. Hoses can become damaged due to pinching in the dishwasher or exposure to high water pressures over time.
Symptoms of a bad sump to water inlet hose include:
This replacement part is also compatible with some Thermador, Gaggenau, and Kenmore models.
It finally gave E15 code, then after drying out the E15 code came back within 5 minutes of running. I dried out the base then I ran the dishwasher and observed water coming down the overflow chute after running only 5 minutes.There is a water inlet (clear water chamber on the side of the machine). It had some gunk inside that was stopping a black float shut-off from moving. I replaced the water inlet chamber. I also suspected the non return valve (also called a check valve). From the parts... Read more
Replaces cracked, kinked, or leaking dishwasher drain hose. Connects unit to household drainage system. Essential when hose is damaged or worn.
Ordered replacement drain hose, left hand panel of dishwasher removed (remove 2 screws in front left trim panel & friction fit clip at top back then slide up & off. This reveals the O-ring drain hose connection point. You need to remove the retainer block where the hose exits the appliance. Old hose pulls out and new hose pushes in. In the end a very easy installation. Most of the time spoent here is removal & reinstallation of dishwasher back into position - the actual hose swap takes 10 mins Read more
The Drain Pump LID is an OEM part for Bosch dishwashers, designed to securely cover and protect the drain pump assembly. This crucial component ensures that the drain pump is shielded from debris and damage, allowing it to efficiently remove used water from the dishwasher at the end of each cycle.
Causes of these symptoms can range from physical damage due to impact or wear and tear over time, leading to cracks, warping, or a degraded seal.
Symptoms of a bad Drain Pump LID include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
After fighting, attempting to clean filer a few times, we gave up and ordered one, one with a lid for the drain pump. Dishwasher is running great now. Easy to order. Got the correct part first time. Great Experience! Read more
Plastic bushing that guides and supports the dishwasher door hinge assembly. Replace if cracked, broken, or worn causing noisy or misaligned door movement.
Checked out the AppliancePartsPros.com online parts/assembly diagrams for our Bosch dishwasher model and ordered the two sided set of new springs + connector ropes + connector-to-door ... plus a couple of other relatively inexpensive adjoining parts that might have become worn over time, just in case they were needed. The extra parts arrived in two days with standard shipping. Called about the "back ordered" primary set of parts (which had been listed as being "in stock" when I placed the... Read more
Secures tine rows in the dishwasher rack to hold dishes in place. Replace if cracked, broken, or missing to restore proper dish positioning and stability.
Replaced the part with the piece I received from AppliancePartsPro. Snap in part. The thing that made it easy to order was that the picture on the website was clear, compared to the exploded view provided by the manufacturer. While I was at it I ordered extras, and some other basket parts that were inexpensive. Read more
Secures the hose between pump and heater in your dishwasher. Replace if loose, damaged, or causing leaks. Confirm fit with your model number.
On my Bosch she55m15uc/64, the cycle would take 3-4 hours, with the machine stuck on "1 minute" for a long time. The interior was getting moldy and smelly, and the dishes had a white film. At first, I thought it was the heater relay on the control board, but I pulled that relay and it seemed to be working. I could get an ohmmeter on the heater element without taking the bottom off the dishwasher, and the resistance was infinite. Replacing the heater did the trick. On my unit there was a... Read more
Fix a dishwasher that won't spray water or makes humming sounds. This circulation pump and motor assembly repair is lengthy but not difficult.
Dishwasher made a humming sound but no water was circulating around. Searching around, I decided that it was either the inlet valve or the pump/impeller. I started with the inlet valve since it’s an easier repair. It didn’t work, no problem, now I have a spare. I then changed the pump and motor assembly. When I got the old one out, the impeller was broken along with a crack in the plastic housing. The repair took about 3 hours following along with the video. The dishwasher now works like... Read more
Six-screw kit for securing the inner door assembly in your dishwasher. Replace missing, stripped, or lost screws to properly fasten door panels.
Repair estimate was $250 parts, $250 labor to change out the circulating pump. I decided to do it myself. Pump was $166 from AppliancePartsPros. It arrived in 4 days. I looked at the video on their website, followed the instructions step by step and did it myself. They estimated 45 minutes. It took 2 hours.There are always minor differences so always take photos of yours. Suggest that you bag up all screws and pieces from each part as you take them off and label the bag. I had 12 bags with 2 to... Read more
Replacement tine row holder for dishwasher upper rack. Securely holds retractable tines in place. Replace if cracked, broken, or missing from wear.
Replaced worn parts and new rollers dishwasher works like new. The diagram on the parts website helped me order the right parts. Read more
Fix a dishwasher with no power or unresponsive controls by replacing the on/off switch. This part controls power to the unit. Simple DIY repair.
I bought a new power switch and replaced the old switch. Read more
Fix a detergent dispenser door that won't stay closed or pops open during the wash cycle. This lid replacement is a simple DIY repair with no tools needed.
After having seen the video I installed the new lid and it worked. Read more
Secures flip-up tines to your dishwasher rack. Replace this small C-shaped clip if broken, cracked, or missing to prevent tines from flopping around.
Easily installed the side mounts and put new trim around the opening. Read more
The 4 x 16 Screw is an OEM component for Bosch dishwashers.
Common causes of faulty screws include standard wear from years of housing vibrations during wash cycles. Mineral deposits lingering around screw heads also risk eventual corrosion and seizing issues.
Symptoms of potentially loose or damaged screws comprise:
This screw type is additionally suited for Thermador, Gaggenau as well as some premium Kenmore dishwashers.
Ordered replacement parts from AP diagram Read more
Replace a worn, stretched, or broken dishwasher door spring. Balances door tension for smooth opening and closing. Installs in door hinge assembly.
I went on your very user friendly website and looked up my bosch dishwasher. I love your diagrams and I felt confident that I could figure out what we possibly needed to get the door to close correctly and get the washer back working again. Your staff is courteous, service was fast and I would definitely recommend Appliance Parts Pros. Read more
Dishwasher won't start or door won't latch? This door lock assembly with microswitch fixes startup issues. Moderate DIY repair, 15-30 minutes install.
REPLACED DOOR LATCH AND DOOR LATCH ASSEMBLY. EVERYTHING WORKS AGAIN. Read more
The Turbidity Sensor is an OEM part for Bosch dishwashers. It is a component located inside the dishwasher that plays a key role in monitoring water quality during each wash cycle. The turbidity sensor detects small food particles and residue in the water, relaying this information to adjust water temperatures, spray pressures, and cycle times accordingly to achieve optimal cleaning results. Causes of failure could be normal wear and tear over time, mineral buildup affecting the sensor's ability to read water quality accurately, or damage from electrical faults. Symptoms of a bad turbidity sensor include:
Ordered and replaced sump pump, backflow preventer valve and turbidity sensor on Bosch dishwasher. The latter two parts were recommended when ordering the sump pump and did need replacing. The videos showing how to remove and replace each part are great. The project went well and the dishwasher is fixed for less than 1/4 of what it would cost to get a repairman out here. In all fairness we do live in a remote location and do not have any local appliance repairmen. This is the third project I... Read more