Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Ed5vhfxvq06 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Access Cover
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2188755

The Rear Access Cover is an OEM part for Whirlpool refrigerators. It protects the rear components of the refrigerator, such as the compressor, condenser coils, and electrical connections, ensuring these vital parts are shielded from dust, debris, and potential damage while still allowing for necessary ventilation.

Causes of a bad rear access cover can include wear and tear from prolonged use, accidental impacts that cause cracks or breaks, or damage during maintenance or repairs. 

Symptoms of a bad rear access cover include:

  • Cracks or visible damage to the cover
  • Difficulty securing the cover in place
  • Excessive dust or debris around internal components
  • Rattling or noise from a loose cover

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Leaking water at the water intake valve.   Christy C. • Warner Robins , GA • May 01, 2020

My 16 year old son ordered the part and replaced the part. It took him less than 5 minutes to replace the part. Read more

More
$83.35
Compare At:
$98.35
You Save:
$15.00

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Screw (8-18 X 5/8)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP693995

This 8-18 x 5/8-inch screw secures appliance panels, brackets, and covers. Replacing a missing or stripped fastener restores a tight fit and helps prevent vibration or loosening where this exact size is specified.

  • Fastens sheet-metal or plastic components where a #8-18 x 5/8 screw is called for
  • Helps maintain alignment and reduce rattling or vibration
  • Replaces stripped, corroded, or missing screws of the same size
  • Common symptoms: loose panels, gaps/poor fit, rattling noises, or visible missing hardware
What's included: One screw Installation notes:
  • Disconnect power and shut off gas/water (as applicable) before service
  • Match thread and length to the original; replace screws one at a time to keep parts aligned
  • Start threads by hand to avoid cross-threading; tighten snugly without overtightening
  • If the receiving threads are damaged, additional repair (clip, insert, or new nut) may be needed

Do-It-Yourself Stories from Customers like You There was no power cord and accessories to attach it   Terry C. • Martin , TN • December 27, 2016

I put all pieces that I ordered on the dryer and plugged it in. Read more

More
$7.95
Compare At:
$9.54
You Save:
$1.59

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Water Lever (Wht)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10152858

Color: White

Do-It-Yourself Stories from Customers like You The ice dispenser lever was cracked and did no longer trigger the dispensing of the ice   Andrea M. • Honolulu , HI • March 01, 2015

I replaced the Ice Dispenser Lever. Since the replacement part is only available in white and my fridge is bone, I replaced also the Water Dispenser Lever, so it looks much better. I followed the instructions in the video, which were very useful and very well done. My problem was that the refrigerator is a KitchenAid built-in, while the instructions were for a Whirlpool, so the removal of the faceplate was quite different from what was shown in the video and more difficult. Also there were some... Read more

More
$53.33
Compare At:
$64.00
You Save:
$10.67

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Grille
Genuine Whirlpool part
By: Whirlpool
Part Number: W10803964

The Grille is an OEM part for Whirlpool refrigerators. This part is typically located at the bottom or top of the refrigerator and serves both functional and aesthetic purposes. It allows for proper airflow to the condenser and other internal components while providing a finished look to the appliance.

Causes of a bad grille can include general wear and tear, accidental impacts, or accumulation of dust and debris over time. 

Symptoms of a bad grille include:

  • Visible cracks or breaks in the grille
  • Reduced cooling efficiency
  • Increased dust or debris buildup
  • Loose or misaligned grille
  • Unusual noises due to restricted airflow

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Broken kick plate grill on a 15 y/o fridge   Timothy B. • Lawrenceburg , IN • January 18, 2015

This was as easy as it could possibly have been, from searching the site for the item, ordering and receiving the 'ship notice' the same day as ordering. Read more

More
$59.49
Compare At:
$70.79
You Save:
$11.30

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Defrost Control Board
Genuine Whirlpool part
By: Whirlpool
Part Number: 4388932

Adaptive Defrost Control Board

Do-It-Yourself Stories from Customers like You The whirlpool side by side needed upgrade of control components   William M. • Sunnyside , WA • February 06, 2017

The 20 year old unit still serves us well, looks good and has been kept in good repair. The condenser fan had stopped so I removed, cleaned and oiled that motor. The decision was made to make an upgrade to the evaporator motor and control units so that the appliance could reasonably be expected to have extended service life. The Ice maker module had been replaced 7 years ago. I ordered the parts and have made the upgrade for temperature controller and the defrost control. If you are in a... Read more

More
$166.67
Compare At:
$229.92
You Save:
$63.25

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Water Tube, 1/4" Od, Cut-To-Fit
Genuine Whirlpool part
By: Whirlpool
Part Number: W11496481

The Water Tube is an OEM component specifically designed for Whirlpool refrigerators. This 1/4" diameter water tube provides a pathway for water to flow through the refrigerator's internal components during operations like ice production. 

Causes of a bad water tube can include cracks or defects from manufacturing, damage from impact or abrasion during shipping or installation, or wear over time from cycles of use.

Symptoms of a bad water tube include:

  • Water leaks or drips inside the refrigerator 
  • Insufficient or slow water flow to components
  • Abnormal sounds from water not flowing smoothly
  • Failure of components dependent on water flow like the ice maker

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore refrigerator models.

Do-It-Yourself Stories from Customers like You Water filter housing leaking   H M. • Picayune , MS • August 18, 2015

Replaced filter housing, and both water tubes Read more

More
$26.95
Compare At:
$31.80
You Save:
$4.85

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Top Coupling
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2198661

This top coupling links two drive components in select washers to transfer rotation smoothly. Replacing a worn or stripped coupling restores consistent agitation/spin and can reduce slipping, rattling, or grinding noises from the drive area. What it does:

  • Connects mating shafts/components so power is transmitted through the drive system
  • Helps maintain alignment and cushions minor shock to protect other parts
  • Failure symptoms may include no or weak agitation/spin, intermittent drive, or clicking/grinding sounds
  • Visual clues can include cracks, rounded/stripped splines, or excessive play
What's included:
  • One top coupling
Install notes:
  • Disconnect power; turn off water supply if moving the appliance
  • Access location varies by model; cabinet/top or front panel removal may be required
  • Note orientation of flats/splines and seat the coupling fully—do not hammer into place
  • Inspect the mating hub/shaft; replace worn companion parts to prevent rapid re-wear

Do-It-Yourself Stories from Customers like You Broken drive on door dispenser for ice maker   Richard H. • Bartlett , TN • March 07, 2016

My LG electric dryer stopped drying the other day and I searched on line for suggestions on what may have caused it to stop working. I came across AppliancePartsPros.com and quickly found some of the most common issues with my LG dryer. The problems were listed in the order of most common occurrence, and had extremely helpful and detailed instructions on how to not only diagnose the problem, they also showed exactly how to access and repair the issue. Unfortunately, it was late on a Thursday... Read more

More
$7.95
Compare At:
$9.46
You Save:
$1.51

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Compressor Starting Device
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4387835

This refrigerator compressor starting device includes the start relay, overload and cover.

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Lights on not cooling   James S. • San Jose , CA • September 08, 2014

Took the screws off the back plate at the bottom and watched the YouTube video on how to remove the cover plate for the starter and overload on the back of the compressor. Ended up snapping the old cover plate (brittle plastic) so I was glad the "kit" came with a new one. I used a small flat-head screwdriver and carefully pried off the starter and overload, then, with the new ones in hand, took the wires off the old ones and immediately put them on the new ones so I didn't lose track (there is... Read more

More
$78.95
Compare At:
$93.95
You Save:
$15.00

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Drain Connector
Genuine Whirlpool part
By: Whirlpool
Part Number: W11512417

The Refrigerator Drain Connector is an OEM part for Whirlpool refrigerators. It is responsible for directing water and condensation from the evaporator fan coil and defrost into the drain pan. 

Causes of a bad drain connector can include cracks, breaks or deformations caused by repeated thermal cycling or impact damage. Mineral or lime buildup inside the connector over many years can also restrict water flow.

Symptoms of a bad drain connector include:

  • Water or condensation leaks around the connector area 
  • Puddles or watermarks on the floor behind the fridge
  • Slow drainage of water from the evaporator fan coil
  • Mold or mildew growth near the connector or drain area

This replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You The problem was ice buildup on the floor of the freezer   William B. • Pahoa , HI • January 15, 2016

A YouTube video: https://www.youtube.com/watch?v=jIdtNdDXFDk , by a professional appliance repair company described replacement of the freezer drain pipe with Kenmore's (by Whirlpool) revised drain pipe. Ice buildup inside the freezer was caused by warm air beneath the freezer contacting cold air from inside the freezer the resulting condensation freezing and blocking the drain, causing the ice buildup inside. The revised drain tube functions as a p-trap to prevent cold/warm air interaction.... Read more

More
$25.95
Compare At:
$31.14
You Save:
$5.19

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dispenser Door Spring
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10224328

For the complete ice door kit order W10823377.

Do-It-Yourself Stories from Customers like You Ice dispenser chute door was not closing or sealing   Robert H. • West Palm Bch , FL • July 23, 2025

The ice dispenser chute door had not been sealing for years. The ice cubes on the lower portion of the ice bin would melt enough eventually to then freeze up into a big, amalgamated blob of ice due to ambient air coming up the chute. This melt-then-freeze would happen, to the extent the chute froze to its own closure. Despite service technician visits over a period of six years nothing they did resolved the issue. I opened the freezer door to reach into the bin from the top to extract usable... Read more

More
$48.95
Compare At:
$57.76
You Save:
$8.81

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Wire Shelf (Freezer)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10318948

This freezer wire shelf restores sturdy, ventilated storage in the freezer compartment. Replace a bent, rusted, or missing shelf to regain safe support and organize frozen items at the correct height.

  • Provides level support and organization for frozen foods
  • Open-wire construction allows air to circulate around stored items
  • Helps maximize usable space by maintaining an extra storage level
  • Replace if the shelf is bent, coating is chipped/rusting, welds are broken, or the shelf is missing
What's included: One wire shelf. Install notes:
  • For safety, disconnect power before servicing
  • Remove or relocate contents to access the shelf position
  • Slide the old shelf out of the side rails; align and insert the new shelf into the same rail slots
  • Wear gloves to protect hands from sharp edges

Do-It-Yourself Stories from Customers like You Missing shelves   Jody M. • Augusta , WI • June 29, 2019

Ordered a couple of shelves for our freezer and now we have room for much more in the freezer. The shelves fit as per the diagram on the appliance part pros site. Read more

More
$127.95
Compare At:
$153.54
You Save:
$25.59

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Top Hinge
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2203771

The Top Hinge is an OEM part for Whirlpool refrigerators. This hinge ensures the proper alignment and smooth operation of the refrigerator door, allowing it to open and close securely. It supports the weight of the door and helps maintain an airtight seal.

Causes of a bad top hinge can include general wear and tear, heavy use, or accidental damage.  

Symptoms of a bad top hinge include:

  • Refrigerator door sagging or misaligned
  • Difficulty in opening or closing the door
  • Door not sealing properly, leading to temperature fluctuations
  • Unusual noises when the door is operated

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Needed hinges for doors   William H. • Niles , MI • September 22, 2015

Put the new hinges on the doors fyi you need to tell what size the screws are for the hinge kits would help a lot Read more

More
$51.26
Compare At:
$61.00
You Save:
$9.74

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Ice Dispenser Lever
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2255431B

Color: Black

Do-It-Yourself Stories from Customers like You Exterior ice & water dispenser parts we discolored mainly due to lime scale   Tamara M. • Saint Charles , MO • July 16, 2016

Even though the refrigerator is 13 years old, I was able to find replacement parts on your site. The DIY video provided on-line for each of the four parts ordered was very helpful ; even though my refrigerator wasn't exactly like the one in the video, it was still helpful. I'm not usually the DIY type- but with your help the repair was very successful! Thank you ! Read more

More
$56.40
Compare At:
$67.12
You Save:
$10.72

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Ice Bin Baffle (Auger Support)
Genuine Whirlpool part
By: Whirlpool
Part Number: W10852691

This baffle sits in the ice bin and supports the auger so ice feeds smoothly to the dispenser. Replace a cracked or worn baffle to restore reliable dispensing and reduce jams or grinding from the ice bucket.

  • Supports and aligns the ice auger inside the bin
  • Guides cubes/crushed ice toward the crusher/dispenser
  • Helps prevent auger wobble, binding, or excessive noise
  • Failure can show as weak/no ice dispensing or intermittent jams
What's included: 1 baffle Install notes:
  • Disconnect power; remove the ice bin from the freezer/door
  • Empty the bin and remove any screws/clips securing the baffle
  • Transfer any reusable hardware; orient the baffle correctly around the auger
  • Tighten fasteners without overtightening; reinstall bin and test dispense

Do-It-Yourself Stories from Customers like You The ice crusher mechanism on my ice maker wasn't working properly i was getting bits of white plastic in my ice so obviously something was broken in there   Tawna M. • Orem , UT • July 27, 2015

I found a video/tutorial on how to take it apart to see what was pieces were broken, then ordered the replacement parts and watched the video to put it back together again. Read more

More
$25.95
Compare At:
$30.62
You Save:
$4.67

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Water Filter Cap
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2186494T

Color: biscuit. It measures about 2-1/2 inches in diameter. For black order WP2186494B. For white order WP2186494W.

Do-It-Yourself Stories from Customers like You Water leak from water filter housing   John B. • Weeki Wachee , FL • January 19, 2019

Replaced with new one and followed the instruction from the video that is on the order Read more

More
$11.40
Compare At:
$13.68
You Save:
$2.28

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Freezer Door Bin
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10144409

This replacement freezer door bin restores secure storage on the freezer door. It keeps smaller frozen items organized and easy to reach, replacing cracked or missing bins to help maintain a tidy, usable freezer space.

  • Attaches to the freezer door to create a convenient storage shelf
  • Holds and organizes frozen foods, condiments, and small packages
  • Direct replacement for cracked, warped, or missing bins
  • Helps the door close properly when the bin is correctly seated
What's included: 1 freezer door bin Install notes:
  • Empty the old bin, then lift up and out to remove from the door tabs/rails
  • Align the new bin's hooks with the slots and press down until it locks in place
  • Ensure the bin is fully seated before loading items
  • Handle plastic carefully to avoid cracking; wear gloves if the old bin is broken

Do-It-Yourself Stories from Customers like You Rental house broken and missing drawers   David R. • Walla Walla , WA • July 28, 2018

Replaced drawers with authentic parts...a perfect fit! Read more

More
$98.95
Compare At:
$117.75
You Save:
$18.80

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store