Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Washer won't start, stops mid-cycle, or shows error codes? The control board manages all functions. Moderate DIY repair restores full operation.
Hi, it's me again. So I learned a valuable appliance repair lesson when trying to fix this washing machine: don't fix something until you figure out why it broke in the first place! The first speed control board died (fixed with my last story on year) and I assumed it was just a cheap part of something, but I was in fact proved wrong when, to my dismay, the new board died a week or so later. Being the self-appointed washing machine expert I became after the last repair, I got right into the... Read more
Small spacer that fits on the idler assembly shaft to properly align the belt tensioner. Replace if worn, cracked, or missing to maintain proper spacing.
Reviewed items that might be the issue and ordered them. After installed noise was gone. Read more
Fix washer filling when off or showing E11 error with this water inlet valve. Controls hot and cold water flow. Moderate DIY repair, 1-2 hours.
Replaced manifold Read more
Fastens panels, brackets, and internal components in your dryer. Replace stripped, rusted, or missing screws to restore secure mounting and alignment.
Screwed it on. The order shipped out the same day, arrived fast and on time. But I have to mention the customer service. The person helping me place the order was EXCEPTIONAL!!!! Very friendly and helpful. BEST customer service experience I’ve ever had. I was so impressed that I asked to speak to her manager. The manager was also exceptional. Very nice. I highly recommend this company. Read more
Fix E32 error codes or washer stopping during fill with this water level pressure switch. Senses water level and controls fill cycles. DIY-friendly repair.
The E32 diagnostic code that the Frigidaire washer was throwing after a quick water fill attempt was not in the supplied Data Sheet that came with the washer and Frigidaire would not provide and updated Data Sheet because, "it's a liabiliity issue" was their statement, but they did tell me that the problem was in the Fill Pressure Sensor/Wire Harness or the Main Control Board (the display board). I ordered the Pressure Sensor and Main Control Board from AppliancePartsPros after checking... Read more
Replaces damaged or burnt-out dryer interior light assembly. Restores visibility when door opens. Includes bulb and socket. Verify fit by model number.
Installed new Asmy-Lamp and added new wire connectors to harness. Read more
10-inch heating element that restores proper heat production in affected appliances. Replaces a worn or failed element to help resolve issues like no heat or unusually long cycle times. What it does:
What's included: One heating element. Install notes:
NOTE: IF THERMISTOR HAS TERMINALS WIRE HARNESS HAS TO BE CHANGED PART# 137288900 PER FRIGIDAIRE
Replaced old element with new element took all of about 20 minutes to do the entire project I would recommend watching it on YouTube a couple times to get it in your head what has to be done, then get it done, Bill. Read more
This replacement screw secures appliance panels and components. With a #10-16 thread and 0.75-inch length, it replaces stripped, rusted, or missing hardware to restore a tight, rattle-free fit and reduce vibration and noise.
Ordered parts from appliancepartspros.com then saw the video they made on replacing door. Then completed door within 30 minutes. Very easy and fast thanks to parts pros video! Read more
Fix a washer that won't spin, shows error codes, or has unresponsive controls. This main control board coordinates all cycles and functions. DIY-friendly.
I ordered the control board because the old one had many (about 30) opens on the back of the control board and the plastic cover for it was warped. Helpful notes; put front cover on before you connect the wiring. This will save you hours of being mad! All the plugins have different ends, you can't screw it up! Third note, those little plastic light transmitters can be put in wrong and it will not go together. Tabs go in! The one set by the start button can be put in backwards and looks correct.... Read more
Dryer not starting or power cutting out? A melted or corroded terminal block disrupts power flow. This 3-terminal block restores secure connections. DIY-friendly repair.
While checking a no heat issue with dryer noticed that terminal block was melted due to loose connections, replaced terminal block with new and replaced heating element. Read more
Machine screw secures panels, brackets, and internal components in washers. Replace missing, rusted, or stripped screws to restore proper fit and alignment.
Like the original. Read more
Replacement mounting screw for washers and laundry centers. Secures components like pulleys, brackets, and panels. Replace if missing, stripped, or damaged.
New parts ordered and installed. Hooked everything back up and she's running like a stealth bomber over North Korea.. completely silent Read more
Secures the fan housing to its mounting points. Replace if the clip is broken, missing, or worn to eliminate rattles and prevent air leaks in your dryer.
Replacement nut that secures internal components in dryers. Restores clamping force when original nut is stripped, worn, or missing. Prevents loosening.
Secures hose connections in dryers to prevent leaks and maintain proper airflow. Replace if hoses are loose or disconnected. Verify fit with model.
Washer won't start, shows error codes, or cycles incorrectly? The control board manages all wash cycles and safety functions. Moderate DIY repair.
After taking the top off the washer I found the Tech Data Sheet ( for repair person ) The E53 code was listed as Low Voltage to the motor board and referred me to test #15. Which stated to check the "drum water NTC" ( Negative Temperature Coefficient or Thermistor). What was misleading was that there are 2 NTC's. If your washer has a "Sanitize" feature , then there is a drum water NTC as well as one on the fill valve body. IF you have the sanitize feature then you need to replace the drum water... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.