Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice maker not dumping or stopped making ice? This complete assembly kit includes motor, harness, and hardware. DIYers report straightforward replacement.
Bought a new unit from you Read more
Secures water supply line connections in your refrigerator. Replace if leaking, loose, or damaged to restore proper ice and water dispenser function.
The old filter head was broken at the supply line side connector fell out. The clicking noise eventually caused the fridge to warm up and stop cooling. The clicking was the overload relay tripping. The Start solenoid on the compressor was an Embarco TSD part 513604044. APP does not have that part nor does any else found a similar one on ebay but I ordered the PTC assembly 6749C-0014E. I removed the overload relay and capacitor from the TSD used two pieces of wire and connectors to create the... Read more
This connector joins water tubing sections in the refrigerator's water system, located at various connection points throughout the water line. Replace when you notice leaks at connection points or when water flow becomes restricted.
Replaced both Read more
Replaces a cracked, broken, or missing ice dispenser door handle on your refrigerator. Installs on the exterior dispenser for easy ice access.
Threaded bases for two roller screws were ~ 80% broken off. Used a short (just barely extends past the end of the roller) sheet metal screw to secure the roller in the upper sliding section of the handle (handle in place first). The head was thick enough to fill the gap between the roller and the cover. Filling that gap accurately is important. Need to keep the roller pushed into the recessed area in the door. (Do a test fit with the parts before trying to install them on the door). Turn the... Read more
Refrigerator won't cool or compressor won't start? This run capacitor provides the electrical boost needed for smooth compressor operation. DIY repair.
Unplugged frig to check connections, everything was ok. When I plugged it back in, nothing worked and the display and ice maker were flickering and clicking. Unplugged the display connector on the main board and could hear clicking from the main board itself. Replacing the main board and capacitor fixed it. I only replaced the capacitor as a precaution. it may not have been bad, but I did it for good measure. Everything is working great now and I don't have to buy a new refrigerator. Read more
Refrigerator light won't turn off when door closes? This door switch controls interior lighting based on door position. Simple DIY repair.
Ordered 2 light switches and replaced them. Read more
Refrigerator not cooling evenly or running constantly? This DC motor assembly drives the fan to restore proper airflow and temperature control in your fridge.
Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.
I found the condensing fan motor would not turn with power applied. I also found a drain tube cracked and breaking. I had to use a snub nose screwdriver to remove and replace condensing fan motor. The power wires were simply a snap on. The new drain tube just slipped on. Thanks for the speedy delivery! Stephanie Hobbs Read more
This is a temperature sensor that monitors the internal temperature of the refrigerator compartment and sends readings to the main control board. The control board uses this data to regulate the compressor and cooling cycles. Replace this sensor if the refrigerator is too warm, too cold, runs continuously, or displays incorrect temperature readings.
I removed the defrost sensor assembly, installed a new one, it worked. Because of a shipping problem with FEDEX, Appliancepartspros resent the parts not once but twice. Needless to say, they are my go-to source for parts from now on. Read more
Refrigerator making loud noise or not cooling evenly? This fan assembly circulates air to eliminate hot spots and restore consistent temperatures.
Bought the fan motor that goes behind the back wall in the freezer section. Getting to it was relatively easy, though the power cord for the new motor was a lot shorter than the old one, so I had to cut the wires and splice it in - which was a little bit of a pain. Second issue was that the shaft for the new motor was longer than the old one and the fan was rubbing in the housing. So I drilled out the end of the fan blade so that the new shaft could push thru and let the fan blade move closer... Read more
Replace a broken or leaking water filter housing that prevents water flow to your dispenser and ice maker. Direct fit for bottom-mount refrigerators.
Replaced the fitting with OEM part from Appliance Parts Pro. Read more
Replacement door basket for bottom-mount refrigerators. Mounts inside the door to hold bottles and jars. Replace if cracked, broken, or missing.
Mounts to the bottom of your refrigerator door to control swing angle and prevent overextension. Replace if cracked, broken, or missing to stop door damage.
The left hinge works on the right side as well as the left. All you have to do is unscrew the little plastic post and move it to the other hole. So even though the web might say that the left hinge assembly is not compatible with your fridge, or that the right hinge assembly is no longer available, it will still work. The door stopper assembly worked just fine. All you have to do is screw it in to the bottom of the door. You will have to disassemble the top hinge (on top of the fridge) in... Read more
Drier assembly for refrigerators. Installs in the sealed refrigerant system to remove moisture and contaminants. Replace if damaged or worn during repair.
Protects refrigerator light bulbs and sockets from moisture and impacts. Replace if cracked, melted from bulbs staying on, or discolored. Confirm fit.
Was able to diagnose problem at AppliancePartsPros.com by entering the model #. This is apparently a common problem with this Refrigerator Replaced Light Socket Assembly, Lamp Reflector, Lamp Case and Lamp Cover. Also replaced the main circuit board (not sure if this was necessary). The wiring on the Light Socket Assembly was different than the original, so it was a bit confusing how to assemble it, and no screws were provided to attach it to the Lamp Reflector - figuring this out took most... Read more
Secures and routes the water tube along the cabinet or door. Replace if cracked, broken, or missing to prevent kinks and keep tubing properly positioned.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.