Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Ge Psg22sipafbs Parts

Best Seller
Refrigerator Dispenser Light Bulb
Genuine Ge part
By: Ge
Part Number: WR01X37886

Illuminates water and ice dispenser area for visibility in low light. Replace when bulb burns out or dispenser area stays dark. Confirm fit with model.

Do-It-Yourself Stories from Customers like You No lights in refrigerator   Lance B. • League City , TX • November 06, 2020

We bought a new house that has a 15 year old GE Monogram built in fridge. The home warranty people sent two guys out saying it was nearly impossible to repair the fridge and they both suggested buying a completely new freezer door for the fridge and of course the warranty company said it was preexisting and we weren't covered. Shocker. I have lighting in the freezer but not the fridge. I purchased a door switch and replaced the old one but that didn't do the trick. So i purchased a 2 amp fuse... Read more

More
$26.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Auger Nut
Genuine Ge part
By: Ge
Part Number: WR01X10315

Secures the auger shaft in the icemaker assembly. Replace if stripped, cracked, or loose, preventing proper ice transport from bin to dispenser.

Do-It-Yourself Stories from Customers like You The cover crusher on my ge ice maker bucket shattered it hasn't been working well since we originally got the refrigerator sometimes we had to scoop ice out rather than get it through the door   William H. • Cary , NC • August 15, 2015

I looked for a site that sold replacement parts for my make of GE refrigerator. I found AppliancePartsPros, and was very surprised at how organized it was. By entering the model number of my refrigerator, I was shown a set of (approximately) 8 general parts diagrams for my refrigerator. I chose the ice making/dispensing diagram. I matched the part that shattered (from use) to what was on the diagram. What I didn't know was how to install the part. I saw references by other customer comments to... Read more

More
$8.69

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Ice Dispenser Auger Drive Coupler
Genuine Ge part
By: Ge
Part Number: WR02X11941

Ice won't dispense or auger spins freely? The drive coupler connects the motor to the auger. Moderately easy DIY repair with pliers and patience.

Do-It-Yourself Stories from Customers like You Ice (broken seal) fizzer light out due to ice then auger motor auger coupler and solenoid cube failure   Damon B. • Tumwater , WA • December 19, 2015

This was a two and half year issue as different things failed at different times. I would get one part, then another would fail. Ultimately, I got to a point where what failed, I hadn't been ordered the part yet. The seal on the freezer door took three bathing's before it plumped up and un-creased. The directions on the box it is shipped in said to heat the seal up in hot water then cool it down with tap water. I didn't need to do that. It took a lot of massaging of the seal, but... Read more

More
$13.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Ice Maker Fill Cup
Genuine Ge part
By: Ge
Part Number: WR29X10109

Small funnel-shaped component in the ice maker that directs water into ice molds during the filling process. Replace if the ice maker produces hollow, small, or irregularly shaped ice cubes.

Do-It-Yourself Stories from Customers like You Ice jamming fill cup coming off   Mark H. • Glendale , AZ • February 29, 2016

Replaced the stripper and fill cup - turns out that the fill cup came with the locking tab broken off. The stripper had a missing paddle, and ice cubes would jam and shut down the ice maker periodically. Let the ice maker warm up after you remove it so the plastic is not so brittle. You have to pry the old stripper out. Make sure the new one locks all across the front. My refrigerator has the ice maker mount toe the side instead of from the hangers in back. I wasn't sure how to remove it,... Read more

More
$10.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Rear Wheel
Genuine Ge part
By: Ge
Part Number: WR02X10695

Replacement rear wheel for refrigerators. Mounts to the bottom rear frame to enable smooth rolling for cleaning and repositioning. Order if cracked or missing.

Do-It-Yourself Stories from Customers like You GE refrigerator front and rear wheels. The rubber shell on the wheels had cracked and peeled off.   Carl C. • London , OH • August 18, 2023

The front wheel assembly replacement (WRXO2X12454) was straightforward and easy to do. Took maybe 30 minutes start to finish. The rear wheel assembly (wheel WRO2X10695 and axle WRO1X10604) that was more involved as the original wheel axle is actually a rivet that you have to cut out. 1. I used a vibrating multitool with a carbide blade to cut the axle out. Had to use a pair of vise grips to hold the rivet to keep it from spinning while cutting it. 2. The new axle I drilled a 2mm hole thru the... Read more

More
$14.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Slide Button
Genuine Ge part
By: Ge
Part Number: WR02X11174

Color: white. Measures about 3-1/2 inches wide by 1 inch high.

Do-It-Yourself Stories from Customers like You Broken crisper drawer   Tim M. • Altura , MN • February 08, 2016

Ordered new parts Read more

More
$10.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Cold Water Reservoir Tank
Genuine Ge part
By: Ge
Part Number: WR17X11324

Replacement cold water reservoir tank for refrigerators. Installs behind the crisper drawer. Replace if cracked, leaking, or causing contamination issues.

Do-It-Yourself Stories from Customers like You The water coming from the ice maker and water dispensor had a foul odor and taste even after changing the filter   David H. • Needham , MA • May 15, 2015

I replaced the supply line to the fridge - no change in taste. I replaced the MWF manifold and tubes, the water inlet valve and the water storage line. That did it, good tasting water again! The ice still has a bad taste, so I'll replace the supply tube from the valve to the ice maker. Overall, replacing these parts was easy and the videos from Appliance Parts Pros helped. Read more

More
$43.32

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Door Closer Cam
Genuine Ge part
By: Ge
Part Number: WR02X11479

This cam mechanism helps your refrigerator door close automatically and stay properly sealed. It provides the mechanical action that pulls the door firmly shut when you push it nearly closed. Replace it if your refrigerator door won't stay closed, doesn't seal properly, or requires excessive force to close completely.

Do-It-Yourself Stories from Customers like You Right door didn't close properly   Roger W. • Newton , GA • November 17, 2017

Replaced the two parts ordered. Read more

More
$13.28

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Crisper Drawer Humidity Control Slide
Genuine Ge part
By: Ge
Part Number: WR72X10049

Humidity control slider for refrigerator crisper drawers. Replaces broken, cracked, or missing adjusters. Installs on drawer to regulate airflow and moisture.

Do-It-Yourself Stories from Customers like You Broken crisper drawer   Tim M. • Altura , MN • February 08, 2016

Ordered new parts Read more

More
$8.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Glide Bracket
Genuine Ge part
By: Ge
Part Number: WR72X10169

The Glide Bracket is an OEM part for GE refrigerators. This left bracket supports the refrigerator drawer, allowing it to slide in and out smoothly for easy access to stored items.

Causes of a bad glide bracket can include regular wear and tear, damage from overloading the drawer, or accidental impact that causes the bracket to crack or break.

Symptoms of a bad glide bracket include:

  • Difficulty sliding the drawer in and out
  • The drawer not aligning properly or coming off its tracks
  • Unusual noises when opening or closing the drawer
  • Visible cracks or breaks in the bracket

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Ice dispenser broke and won't shut off freezer shelf support broke from sliding ice maker in and out all the time   Wayne B. • Belvidere , IL • November 07, 2015

The hinge broke on the ice dispenser funnel and housing. I took them off and replace them, putting the old switches and bulb in the new housing. It took some time to put the return spring back because it does not appear in the assembly diagram. Once working, it secures to the door with 4 screws, and worked as it should. The support slide inside the freezer is held with two 1/4 in screws that were taken off with a nut driver. the rear screw is hard to get at. The new bracket just screws on, and... Read more

More
$32.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dust Cap
Genuine Ge part
By: Ge
Part Number: WR02X10322

This evaporator fan motor dust cap is an authentic OEM replacement part found on refrigerator and freezer fan motors. This dust cap prevents the fan motor bearing and housing from being damaged by dirt and debris. If the dust cap is cracked or broken, the fan may make loud squealing noises. If the dust cap is not removed and replaced, the fan could stop working and ultimately cause the refrigerator's temperature to be affected. To start, disconnect the power and water to the refrigerator. Remove food from the freezer so that the back panel of the freezer can be accessed to reach the fan. Remove the ice maker and set it outside the freezer. Disconnect the fan and take it out of the freezer to expose the fan's shaft and the dust cover. Pry the dust cover off and install the new one. Replace the fan and cover. Reconnect the wires and reinstall the icemaker. Put the food back in the freezer. Reconnect the power and water.The evaporator fan motor dust cap is a white plastic part that is sold individually. This dust cover is made for use in refrigerators manufactured by General Electric, Hotpoint, and Kenmore.

Do-It-Yourself Stories from Customers like You Evaporator fan started making loud noise from blade hitting shroud   Kerry M. • Englewood , CO • October 03, 2016

Replacement of the evaporator fan motor, fan blade, and grommets. The amount of disassembly to reach the part took most of the effort Read more

More
$17.48

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Ice Dispenser Deflector
Genuine Ge part
By: Ge
Part Number: WR17X10703

Ice scattering everywhere? This deflector guides cubes or crushed ice down the chute into your glass. Replaces cracked or missing deflectors in 30 minutes.

Do-It-Yourself Stories from Customers like You The ice maker did not crush ice   Joy U. • Galveston , TX • October 02, 2016

When we inspected the first time we found that Plactic had broken from the spiral part that for wards the ice. Also there were cracks in two places of other parts. There was a hole in the bottom of the bin. The new spiral was assembled and two new parts were replaced with help from the video and the diagram and the unit worked well. Two months later, ice maker would not forward any ice though the bin was full. We emptied the bin sand have ordered a new part or two in hopes that they will... Read more

More
$11.67

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ice Deflector Spring
Genuine Ge part
By: Ge
Part Number: WR02X11768

The Ice Deflector Spring is an OEM replacement part for GE refrigerators. This spring is a crucial component of the ice dispensing system, specifically in selecting between crushed and whole ice cubes. It is designed to always force the diverter back in a way that the cubes get crushed. When whole cubes are selected, the solenoid pulls the lever against the spring’s tension to shift the configuration, allowing cubes to bypass the crusher blades.

Causes for a malfunctioning Ice Deflector Spring can include wear and tear from regular use, corrosion due to constant exposure to moisture, or mechanical failure that prevents it from effectively reverting the diverter to the crushed ice configuration.

Symptoms of a bad Ice Deflector Spring include:

  • The ice dispenser only dispensing whole cubes, even when crushed ice is selected
  • The diverter not returning to the crushed ice configuration
  • Unusual sounds during the ice dispensing process
  • The need for manual intervention to get crushed ice

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Not dispensing ice, making loud noise   Dennis V. • Parker , CO • March 24, 2020

When I took it apart I found that the drive cup was cracked, the helix lock plate hole was reamed out and the ice deflector spring was broken. The biggest problem was the helix had slipped down the shaft and allowed the end of the shaft to bore a hole in the housing which made it a bear to get out. Others have had the same problem. Once I got past that obstacle, it was simple to replace all the parts and it's working like normal again. Very helpful video explaining the repair. Read more

More
$16.38

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Evaporator Fan Motor
Genuine Ge part
By: Ge
Part Number: WR60X10074

Fix a refrigerator not cooling with this evaporator fan motor. Circulates cold air throughout fridge and freezer for uniform cooling and temperature control.

Do-It-Yourself Stories from Customers like You Not cooling properly   Carroll D. • Medical Lake , WA • September 25, 2014

New cond fan & new evap fan & new defrost heater unit Read more

More
$131.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Recess Door Retainer (Dispenser Ice Chute)
Genuine Ge part
By: Ge
Part Number: WR2X8818

The recess door retainer secures the dispenser's ice chute flapper in the refrigerator door. Replacing a cracked or missing retainer restores proper flapper pivot and sealing to help reduce frost buildup and air leaks around the dispenser.

  • Holds the recess/ice door on its pivot within the dispenser assembly
  • Helps the flapper close fully to seal the ice chute
  • Restores smooth open/close action of the dispenser door
  • Common symptoms: loose or fallen flapper, poor chute seal, frost or condensation in the dispenser area, and ice clumping near the chute
What's included: 1 recess door retainer Install notes:
  • Unplug the refrigerator before servicing the dispenser
  • Carefully remove the dispenser bezel/control panel to access the ice chute door assembly
  • Note spring orientation and retainer position; transfer components to the new retainer
  • Verify flapper movement and seal before reassembly and restoring power

Do-It-Yourself Stories from Customers like You Yes ice was not coming out of the dispenser   Jason S. • Goose Creek , SC • December 02, 2014

I replaced the solenoid, door, spring and bucket. The bucket cracked from ice freezing inside it. Ice froze inside the bucket because the solenoid stopped pulling the door closed which allowed hot humid air into the freezer. While I was in there I replaced the dispenser door, spring and crank because they are cheap and the old ones were moldy. The mold is most likely from the door not closing and causing condensation on the parts as well. Read more

More
$7.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Armature Kit (Dispenser Solenoid)
Genuine Ge part
By: Ge
Part Number: WR62X26536

This armature kit is the moving plunger and linkage operated by the dispenser solenoid. It opens and closes the ice chute door during dispensing and helps it seal when idle to reduce frost and warm-air leaks.

  • Converts the solenoid's electrical action into mechanical movement for the dispenser ice chute door
  • Helps maintain a proper seal to limit frost and moisture around the dispenser
  • Typical symptoms: ice won't dispense; chute door won't open/close; frost/ice buildup at the chute; loud buzzing or clicking from the dispenser area
  • Wear or sticking of the armature/spring can hinder movement and affect dispenser operation
What's included: 1 armature kit Installation notes:
  • Unplug the refrigerator and shut off water to the dispenser before servicing
  • Access the dispenser mechanism in the door; remove trim/control panel per your model's service information
  • Note the orientation of the armature, spring, and linkage; transfer components one-for-one to the new kit and secure hardware
  • Verify the solenoid plunger moves freely, reassemble, restore power, and test dispenser operation

Do-It-Yourself Stories from Customers like You Water was overflowing out of the ice maker during fill process and freezing into a block of ice!   Steven B. • Arlington , TX • March 17, 2015

Replaced the water supply valve...boom! Read more

More
$57.32

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google