Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Ge Zbd 6400 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Push-On Nut
Genuine Ge part
By: Ge
Part Number: WR2X7054

The Push-On Nut is an OEM part for GE appliances. This small component is typically used to secure various fittings and fastenings within appliances, ensuring they are tightly held and do not loosen over time. Its push-on design allows for easy installation, making it a straightforward solution for maintaining the structural integrity of your appliance components.

Symptoms of a failing Push-On Nut include:

  • Loose components within the appliance
  • Parts that seem to detach or move unexpectedly
  • Unusual noises due to parts rattling or shaking
  • Difficulty in securing components during repairs or maintenance

Causes of a bad push-on nut can include metal fatigue leading to loss of elasticity, corrosion from exposure to moisture, or general wear from repeated removal and installation.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You My ge potscrubber dishwasher stopped washing dishes the soap from the container would just run down the door and the dishes would still be dirty   Scott F. • Sanger , TX • January 23, 2016

Removing the bottom panel and watching the internals while the washer was running revealed a small drip from what appeared to be a plastic cam that was attached to a solenoid. The water was dripping from the shaft the cam attached to down into the solenoid. Being a DIY guy I pulled the washer out, turned it upside down and inspected the effected mechanism. It appeared that there was a seal on the shaft that was leaking. The water leaking into the solenoid caused it to rust and stick. A quick... Read more

More
$10.67

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Hinge Arm Link
Genuine Ge part
By: Ge
Part Number: WD14X10009

The Hinge Arm Link is an OEM part for GE dishwashers. This component functions as a connection point between the dishwasher door and the hinge mechanism, allowing the door to open and close smoothly. The hinge arm link ensures that the door can bear the weight of itself, often laden with a mounted dish rack when fully loaded, without straining the hinges or misaligning.

Causes of damage to the hinge arm link often involve regular wear and tear from the constant motion of opening and closing the dishwasher door. 

Symptoms of a bad Hinge Arm Link include:

  • Difficulty opening or closing the dishwasher door 
  • A door that won't stay closed or opens unexpectedly 
  • Visible wear or damage to the hinge arm link, such as bending, breaking, or severe wear marks 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The hinge arm link broke   Ronald I. • Las Vegas , NV • March 02, 2015

I watched the repair video and ordered the part ( I luckily ordered two links). The video was not exactly for my model dishwasher but I did follow the instruction for removal from the cabinet. Since my model was not shown, I was looking to see how the door spring and the Hinge Arm Link was supposed to be set up. I had the impression that the door spring and link was only on the right side of the dishwasher. I finally figured it out and took pictures of the set-up for the next time the link... Read more

More
$11.41

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dishwasher Detergent Dispenser
Genuine Ge part
By: Ge
Part Number: WD12X10163

Detergent door won't stay closed or latch broken? This dishwasher dispenser releases soap and rinse aid during cycles. DIY repair in 20-30 minutes.

This part fixes the following symptoms
  • Will not dispense detergent
See more...
Do-It-Yourself Stories from Customers like You Detergent and rinse aid dispenser stopped working   Donald L. • Rochester , MI • April 18, 2020

Bought the replacement dispenser from APPros.com (of course). The video shows a front control panel, and our dishwasher has the 'hidden' control panel on the top of the door. So here's the difference: 1) You need to take out all the screws, except the two near the latch at the top. The other video shows only taking out the bottom six screws because the remainder of the screws hold the front control panel. I used a couple paint cans with rags on top to hold the corners of the door when... Read more

More
$74.51

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dishwasher Upper Dishrack
Genuine Ge part
By: Ge
Part Number: WD28X31820

Replacement upper dishrack for dishwashers. Installs in the top position to hold plates, bowls, and glasses. Replace if rusted, cracked, or broken.

Do-It-Yourself Stories from Customers like You Dishwasher racks needed replacing   Wanda G. • Chester , CA • January 16, 2015

Found the correct racks on Appliance Parts.com. They shipped as promised. When I received them, however, I couldn't figure out how to replace the top rack. Didn't know how to get the end cap off Sooo - I went back on the website and watched the repair video and voila - was easy. All that was required was a flathead screwdriver and the knowledge of where to use it!!! Replacements in the dishwasher in 5 minutes or less. Great website and very helpful videos. I will recommend this website to... Read more

More
$119.41

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Appliance Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387230

Replacement mounting screw for securing handles, panels, and internal components. Needed when original screws are stripped, lost, or broken during repairs.

Do-It-Yourself Stories from Customers like You The lint catch was broken   Misti P. • Spokane , WA • January 18, 2019

This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more

More
$7.94

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dishwasher Lower Rack Roller And Stud Assembly
Genuine Ge part
By: Ge
Part Number: WD12X10231

Replacement roller and stud assembly for dishwasher lower rack. Installs on rack frame for smooth gliding. Needed when wheels are broken, cracked, or missing.

Do-It-Yourself Stories from Customers like You Lower rack wheels broken making is difficult to move the rack in and out   Joan O. • Bainbridge , GA • July 22, 2016

My daughter replaced the wheels. I showed her how to remove the old wheel and snap on the new ones. Easy fix that empowers her to try repairs on her own. Read more

More
$11.57

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dishwasher Hinge Cable
Genuine Ge part
By: Ge
Part Number: WD01X10393

This cable connects the dishwasher door to the control mechanism and maintains proper door tension. It allows the door to open and close smoothly while supporting the door's weight during operation. Replace this cable if the door drops suddenly when opened, won't stay open, or feels loose and unsupported.

Do-It-Yourself Stories from Customers like You Door cable broken   Clay C. • Chapel Hill , NC • October 15, 2014

At first it seems that the pulley can't be removed to make this repair. However,after removing the screw that holds the pulley in place, if you take a small screwdriver and tap the center of the pulley bracket with a hammer it comes out from behind and will go back in with hand pressure after repair. Read more

More
$30.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Fill Funnel Service Kit
Genuine Ge part
By: Ge
Part Number: WD49X25081

The Fill Funnel Service Kit is an OEM replacement part for GE dishwashers. It contains the funnel assembly and seal/gasket used for the water inlet. Reliable filling is important for effective cleaning.

Causes can be cracks, tears, or deformities developing in seals over extended use periods. Mineral buildup may also compromise sealing surfaces.

Symptoms of a bad service kit include:

  • Water leaks from around the inlet area
  • Inconsistent water filling during dishwasher cycles
  • Damp residue or puddles below inlet assembly

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

Do-It-Yourself Stories from Customers like You Water leaking   Long Y. • Torrance , CA • November 04, 2026

Replace the part Read more

More
$19.54

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dishwasher Rinse Aid Dispenser Cap
Genuine Ge part
By: Ge
Part Number: WD12X10122

Replacement cap that seals the rinse aid dispenser on your dishwasher door. Replace if cracked, broken, warped from heat, or missing to prevent leaks.

Do-It-Yourself Stories from Customers like You The vent part was broken and woulkd not stay in its place and kept falling out the rinse aid cap was broken also and ended up falling on the he4ating element and burnt   Martha R. • Spring , TX • February 08, 2015

This was very simple. Thgey just popped back into place asnd the cap screws in. Read more

More
$9.71

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dishwasher Fine Filter
Genuine Ge part
By: Ge
Part Number: WD12X10109

Traps food particles during wash cycles to prevent recirculation and ensure spotless dishes. Replace if clogged or damaged. Confirm fit with your model.

Do-It-Yourself Stories from Customers like You Dishwasher wasn't cleaning well spots and food still attached kind of problems   Terry B. • Sacramento , CA • January 31, 2017

My daughter and I went to Youtube and found an extremely well presented video on how to clean our exact make and model of dishwasher. We live in a newly rented house, new to us, not new. The dishwasher was an unholy nightmare of filth, clogged filters, calcium deposits coating and blocking in literal heaps, discovered when taken apart. The miracle really was that the dishwasher cleaned at all. We cleaned and scraped everything thoroughly, the fine filter and the sump filter as well but decided... Read more

More
$40.64

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Door Gasket
Genuine Ge part
By: Ge
Part Number: WD8X229

The Door Gasket is an OEM part for GE dishwashers. It forms a seal between the dishwasher door and tub which is critical for proper operation. The gasket ensures excess water and moisture do not leak from the dishwasher during active wash and rinse cycles. It also helps keep noise levels low by providing sound insulation. This gasket measures 3/8 x 89 inches.

Common causes of a bad door gasket include regular wear and tear, exposure to high temperatures and detergents, or physical damage. These factors can cause the gasket to lose its flexibility and sealing capability.

Symptoms of a bad Door Gasket include:

  • Water leaking from the dishwasher door
  • Visible cracks, tears, or deformation in the gasket
  • The door not closing properly or securely
  • Increased moisture around the dishwasher during or after cycles

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Water emptied out under the door of my 24 yr old GE dishwasher on to the floor.   Andrea B. • Harrisburg , PA • September 22, 2018

After researching on the APP site, I decided what I thought I would need and purchased a new Gasket, Gasket Insert, Left & Right Corner Baffles from APP. The parts were shipped immediately. However, I’m an 80 yr. old female so I procrastinated for almost 6 weeks before deciding to 'tackle' the repair myself rather than hiring an appliance repair person or "handyman". I went back into the AppliancePartsPros site and reviewed the wonderful videos related to the repair since Matt had made it... Read more

More
$97.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dishwasher Sump Filter And Cover
Genuine Ge part
By: Ge
Part Number: WD22X10077

Dishes coming out dirty or spotty? A clogged sump filter lets food particles recirculate. This filter traps debris for cleaner dishes. DIY install.

This part fixes the following symptoms
  • Not cleaning dishes properly
  • Will not drain
See more...
Do-It-Yourself Stories from Customers like You Dishwasher wasn't cleaning well spots and food still attached kind of problems   Terry B. • Sacramento , CA • January 31, 2017

My daughter and I went to Youtube and found an extremely well presented video on how to clean our exact make and model of dishwasher. We live in a newly rented house, new to us, not new. The dishwasher was an unholy nightmare of filth, clogged filters, calcium deposits coating and blocking in literal heaps, discovered when taken apart. The miracle really was that the dishwasher cleaned at all. We cleaned and scraped everything thoroughly, the fine filter and the sump filter as well but decided... Read more

More
$49.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dishwasher Pump Connector
Genuine Ge part
By: Ge
Part Number: WD18X10010

Dishwasher leaking from underneath? A cracked pump connector causes water pooling. Requires dishwasher removal; typically 1-hour repair once accessed.

Do-It-Yourself Stories from Customers like You Leaking water onto the floor   John G. • Canmer , KY • May 28, 2015

The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more

More
$43.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dishwasher Water Inlet Valve
Genuine Ge part
By: Ge
Part Number: WD15X93

Dishwasher not filling with water or leaking during cycles? The water inlet valve controls water flow. DIY-friendly repair, typically 10-30 minutes.

This part fixes the following symptoms
  • Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You Dishwasher would not fill with water   Robert N. • Susanville , CA • January 09, 2016

I took the inlet valve apart, found it was clogged with sediment, so I cleaned it and reinstalled it. Water was still not filing, so I figured the valve was sticking. I ordered a new valve,because $30 was a lot cheaper than a new dishwasher. I took out the old valve with two screws, and disconnected the supply line, the brass elbow, one hose, and a wiring harness. I reattached it in the same place, re-using the all the other parts, and once I turned the power and water back on, it worked as... Read more

More
$44.54

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dishwasher Detergent Dispenser Latch
Genuine Ge part
By: Ge
Part Number: WD16X10011

Detergent cup won't stay closed? This dispenser latch secures the detergent cup during wash cycles. Direct replacement part with video guide available.

Do-It-Yourself Stories from Customers like You Soap dispenser wouldn't close door kept falling down   Graeme M. • Branford , CT • October 07, 2017

First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then... Read more

More
$21.40

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dishwasher Soap Dispenser Lever
Genuine Ge part
By: Ge
Part Number: WD16X313

Dishwasher detergent cup won't stay closed or won't open fully? This soap dispenser lever controls detergent release. DIY repair in 15 minutes.

Do-It-Yourself Stories from Customers like You Soap dispenser wouldn't close door kept falling down   Graeme M. • Branford , CT • October 07, 2017

First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then... Read more

More
$25.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google