Glw1339eso Parts

The Drain Pump is an OEM part for GE washing machines. It is essential for expelling used water from the washer during and after the wash cycle. This pump ensures that water flows efficiently out of the machine, preventing standing water which can lead to issues like mold and unpleasant odors. 

Causes of a bad Drain Pump can include clogging from small garments or debris, motor failure, or damage to the pump impeller.

Symptoms of a bad Drain Pump include:

• Water not draining out of the washing machine,
• Unusual noises coming from the pump area during the drain phase,
• The washer stopping mid-cycle.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Triple Water Valve is an OEM part for GE washing machines. This valve controls the flow of hot, cold, and warm water into the washer, ensuring the correct water temperature and volume for each cycle.

You should replace the triple water valve if it becomes faulty. Causes of a bad triple water valve can include mineral buildup from hard water, wear and tear from regular use, or electrical malfunctions affecting the valve's solenoids.

Symptoms of a bad triple water valve include:

• The washer not filling with water or filling slowly
• Incorrect water temperature during cycles
• Water leaking from the valve area
• No water flow when the cycle starts

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Timer Dial is an OEM part for GE washing machines. It allows the user to set and control the various wash cycles by turning the dial to the desired position. This component interfaces with the timer mechanism, enabling precise control over the wash, rinse, and spin cycles.

The timer dial may need to be replaced if it becomes cracked, stripped, or otherwise damaged. Causes of a bad timer dial can include frequent use, accidental impacts, or exposure to harsh cleaning chemicals that can weaken the plastic.

Symptoms of a bad timer dial include:

• Difficulty turning the dial or selecting the correct cycle
• The dial not staying in place or slipping
• The washing machine not starting or progressing through cycles properly
• Visible cracks or damage to the dial

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Control Knob is an OEM part for GE dryers. It attaches to the front panel and allows users to set and control various dryer functions such as temperature, timing, and drying modes. This knob provides a simple interface for user interaction, ensuring ease of use and accessibility.

Symptoms of a bad Control Knob include:

• The knob slipping or failing to engage with the appliance’s settings,
• Difficulty in turning or adjusting the settings,
• The knob breaking or coming off completely.

Causes of control knob failure typically include physical damage from impacts, degradation from overuse, or environmental factors that can weaken the plastic, such as excessive heat or humidity.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Hose Clip is an OEM part for GE washing machines. It secures the drain hose to the back of the washer, preventing it from becoming dislodged during operation. This ensures that water is properly directed out of the washer and into the household drain system, preventing leaks and water damage.

Causes of a bad drain hose clip can include wear and tear from regular use, damage from improper handling during installation or maintenance, or breakage due to repeated stress and movement of the washer.

Symptoms of a bad drain hose clip include:

• Water leaking from the back of the washer
• Drain hose detaching or becoming loose during operation
• Difficulty securing the drain hose in place
• Visible damage or cracking on the clip

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: For the entire drain hose, use part number WH41X10096.

The Agitator Coupler is an OEM part for GE washing machines. It connects the agitator to the drive shaft, enabling the agitator to move and clean clothes effectively during the wash cycle.

You should replace the agitator coupler if it becomes damaged or worn out. Causes of a bad agitator coupler can include excessive load sizes, wear and tear from repeated use, or damage from foreign objects caught in the washer.

Symptoms of a bad agitator coupler include:

• The agitator not moving or spinning properly
• Unusual noises during the wash cycle
• Poor cleaning performance

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The washer timer is an OEM part for GE washing machines. This timer controls the various cycles of the washing machine, including wash, rinse, and spin cycles. By regulating the duration and sequence of each cycle, the timer ensures that the washing machine operates smoothly and efficiently.

Causes of a bad timer washer can include electrical failures, wear and tear from regular use, or internal mechanical issues. A faulty timer can lead to problems with the timing and execution of the wash cycles, potentially leaving clothes unwashed or causing the machine to stop unexpectedly.

Symptoms of a bad timer washer include:

• The washer not advancing through cycles
• The washer stopping mid-cycle
• Inconsistent or incorrect cycle timing
• The timer knob not turning or becoming stuck

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Inner Tub Mounting is an OEM part for GE washing machines. It secures the inner tub to the washer's outer tub, providing stability and support during the wash and spin cycles. This mounting component is crucial for the proper alignment and operation of the washer's drum.

Causes of a bad mounting include excessive loads, continuous use over time, or physical damage due to impacts or misalignment. A faulty inner tub mounting can lead to significant operational issues and potential damage to other components.

Symptoms of a bad inner tub mounting include:

• Excessive vibration or shaking during wash or spin cycles
• Unusual noises or banging sounds
• The inner tub appearing misaligned or loose
• Leaks from the washer during operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lid Switch Assembly with Wire Harness is an OEM part for GE washing machines. This assembly is crucial for the safe and effective operation of the washer, as it detects whether the lid is closed and allows the machine to operate only when the lid is securely shut. It also helps to control the washer's functions during the spin and agitation cycles.

Causes of a bad lid switch assembly can include regular wear and tear, electrical issues, or physical damage due to forceful closing of the lid. A faulty lid switch can prevent the washer from operating properly or stop it mid-cycle.

Symptoms of a bad lid switch assembly include:

• The washer not starting or stopping mid-cycle
• The machine not spinning or agitating
• Error codes related to lid or door issues
• The washer filling with water but not proceeding to the wash cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Pressure Switch Hose is an OEM part for GE washing machines. It connects the pressure switch to the tub, allowing the switch to monitor the water level within the washing machine. This ensures the proper amount of water is used during each cycle for efficient washing and rinsing.

You should replace this pressure switch hose if it becomes cracked, clogged, or otherwise damaged. Common causes of a bad hose include wear and tear from repeated use, buildup of detergent or debris, and damage from improper handling or installation.

Symptoms of a bad pressure switch hose include:

• Washing machine not filling with water
• Overfilling or underfilling of the tub
• Inaccurate water level detection
• Error codes related to water level issues

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Triple Water Valve is an OEM part specifically designed for GE washing machines. It precisely controls the flow of water into three separate circuits to fill the tub, dispense detergent and drain dirty water.

Symptoms of a faulty valve include:

• Inability to fully or properly fill the washer
• Inadequate rinsing or failure to drain fully
• Uneven or inconsistent water levels
• Leaks or water left in the tub after cycles

Causes can be mineral buildup affecting water flow, internal component wear over time, or damage that disrupts valve operation.

This OEM GE replacement part is also compatible with Hotpoint, RCA and some Kenmore models as well.

The Selector Knob is an OEM part for Frigidaire appliances designed for use on various models of washers and dryers. This knob enables users to select different cycles and settings, providing essential control over the appliance's operations.

Symptoms of a failing selector knob include:

• The knob failing to engage or change settings
• Difficulty in turning or a lack of resistance
• Visual signs of wear such as cracks or breakage

Causes of selector knob deterioration typically involve continuous mechanical use, accidental impacts, or exposure to harsh environmental conditions that can weaken the plastic.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Compression Ring is an OEM part for GE washing machines. This ring is essential for securing the tub within the washing machine, ensuring it remains in place during the wash and spin cycles. It helps maintain the stability and proper function of the washing machine.

You should replace the compression ring if it becomes worn, cracked, or damaged. Causes of a bad compression ring can include frequent use, high-stress loads during wash cycles, or physical damage, which can lead to instability and poor washing performance.

Symptoms of a bad compression ring include:

• Excessive shaking or movement of the washing machine during cycles
• Unusual noises during operation
• The washing machine tub appearing misaligned or loose
• Ineffective washing due to instability

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Agitator is an OEM replacement part for Frigidaire washing machines. This component is responsible for moving clothes during the wash cycle, ensuring that water and detergent are evenly distributed for effective cleaning. The agitator's motion helps to loosen dirt and stains from fabrics. The agitator measures approximately 17" tall

Causes of a bad agitator can include wear and tear over time, damage from washing heavy or unbalanced loads, or issues with the agitator’s internal mechanisms that reduce its efficiency.

Symptoms of a bad Agitator include:

• Clothes not getting properly cleaned
• The washing machine making unusual noises during the wash cycle
• The agitator not moving or moving erratically
• Visible damage or cracks on the agitator

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Rod & Spring Assembly is an OEM part for GE washing machines. This assembly helps support and stabilize the washing machine tub, reducing excessive movement and vibrations during the wash and spin cycles. It ensures the smooth operation of the washing machine, contributing to efficient and balanced performance.

Causes of a bad rod and spring assembly can include regular wear and tear, heavy loads that strain the components, or damage from repeated use. Over time, these factors can lead to decreased stability and increased noise during operation.

Symptoms of a bad rod and spring assembly include:

• Excessive shaking or vibrating during wash cycles
• Loud banging noises
• The washer moving or "walking" during operation
• The tub appearing off-center or imbalanced

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Spin Bearing is an OEM part for Frigidaire washing machines, specifically designed to facilitate the smooth and efficient rotation of the washer drum. This bearing plays a pivotal role in the operation of your washing machine, allowing the drum to spin freely with minimal friction and noise.  

Causes for replacement may include wear and tear from regular use, water damage leading to rust or corrosion, or physical damage from excessive load sizes. 

Symptoms of a bad Spin Bearing include:

• Loud noises during the spin cycle, often described as grinding or rumbling
• The drum struggling to spin or not spinning as smoothly as it should
• A noticeable decrease in washing performance due to the drum's impaired movement

This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore gas ranges.