Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement screw for securing panels, brackets, and internal components. Replaces missing, stripped, or damaged fasteners to restore proper fit.
Replaced door latch and switch. Parts are plastic so you must know what you are doing to avoid breaking new parts. Videos were hard to find for my model - eventually I found a video that addressed a different problem but required disassembly of a washer cabinet similar to mine. I removed the control panel using a putty knife and unplugged the wire to the latch switch. Then I remove 3 screws securing the washer's top panel to the back panel. Using a rubber mallet, I gently knocked the top panel... Read more
This replacement screw fastens appliance panels, brackets, and internal components so everything stays aligned and rattle-free. Use it to replace stripped, corroded, or missing hardware and restore a solid, secure fit during repairs.
Replacement shelf fit easily, perfectly. Was going to swap out screw for door handle, but found it was now tight. Will hang on to replacement screw until handle becomes loose again. Read more
Replaces a cracked, broken, or missing shelf pan assembly in your refrigerator compartment. Restores the shelf surface above drawers and pans.
Ordered a new one Read more
Secures items on your refrigerator door shelf, preventing jars and bottles from sliding out. Replace this bar if cracked, broken, or missing to restore stability.
It was easy to install, used some Vaseline on plastic parts to make it easier to install Read more
Secures the water filter in its housing and provides a handhold for removal. Replace if cracked, broken, or missing to maintain a proper seal.
Using the videos and some dismantling of the unit, I was able to identify and order all the parts from this site. I cross-checked other sites and they were cheaper here. All the parts came within 48 hours and I was able to install them. The unit works like new now. thanks Read more
Refrigerator not cooling properly? A clogged filter drier prevents proper refrigerant flow. Requires professional installation due to sealed system.
Ordered new Evaporator part and Drier from Appliance Pros. The part arrived earlier than expected and was properly packaged. I had both parts installed by a professional as they required a level of expertise above my capabilities. Works perfectly. Read more
Fixes clicking noise every few minutes and refrigerator not cooling. This start relay delivers the electrical boost your compressor needs to start reliably.
Replaced Capacitor, Start-Dev and thermostat, so for so good. Read more
Fix a refrigerator that won't cool or clicks repeatedly. This compressor start device restores cooling function. Easy DIY repair in under an hour.
Easy Read more
This replacement cabinet screw secures panels, brackets, and ducts in Whirlpool-built appliances so components stay aligned and secure. Replacing missing or stripped hardware helps reduce vibration, rattling, and gaps that can affect performance.
The problem was that the motor coupler & shaft had a tiny bit of rust at their union. With the weight of the ice bin it rusted in the lowest position. This didn't allow the motor coupler to float on the shaft. There is a spring inside the shaft that pushes up on the motor coupler keeping it engaged in the ice bin coupler above. This coupler in turn rotates the auger in the bin to dispense the ice. I removed the motor coupler & shaft, tapped the coupler loose and filed off the rust. This allowed... Read more
Ice won't dispense or comes out slowly? A worn or stripped ice auger is often the culprit. This repair restores smooth dispensing in 30-45 minutes.
Found bad auger motor drive shaft, it was rounded on the end that goes into motor. While I was there I replaced the seal, auger (old one rusty) and coupler. The new auger is stainless steel (I believe and slightly longer) and should not corrode like old white one. If changing auger, make sure you put the assembly back together correctly (take a few pics of the old one and lay it out as taken apart). As always, parts arrived quickly. Read more
Flat spacer for refrigerator door hinges. Maintains proper clearance between hinge and door for smooth operation and tight seal. Replace if worn or missing.
My LG electric dryer stopped drying the other day and I searched on line for suggestions on what may have caused it to stop working. I came across AppliancePartsPros.com and quickly found some of the most common issues with my LG dryer. The problems were listed in the order of most common occurrence, and had extremely helpful and detailed instructions on how to not only diagnose the problem, they also showed exactly how to access and repair the issue. Unfortunately, it was late on a Thursday... Read more
Fix ice melting in the bin or ice chute door not closing properly. This dispenser door support bracket mounts the flapper for a proper seal. 20-30 min repair.
Replaced the 2 parts that had broken (due to the wrong plastic selection by Kenmore IMO. The motor needed to be re-clocked but this video https://youtu.be/QK8C8rxbkhc gave the information needed. Between AppliancePartsPros.com and youtube I have rebuilt this fridge (water valve, Ice maker, Auger gearbox and ice shute door) Probably could do the job in about 30 minutes now that I know how and exactly what needs to be done. Only needed the pliers to turn the motor shaft Read more
This ice door motor drives the dispenser's ice chute door, opening to let ice out and closing to seal the chute. Replacing a worn motor restores proper door movement and helps reduce warm-air leaks and frost around the dispenser.
Talked to a service rep. and he helped me diagnose what was needed. Read more
This is a replacement screw designed to work with a wide range of household appliances. It is used for many purposes in these appliances, from holding body panels together to securing electronics into control boards. However, screws are subject to damage through corrosion, impact, and improper installation/removal. In most cases, the primary damage to this screw is through corrosion – it may become rusted or corroded in place, depending on the appliance and the maintenance provided during its lifespan. The screw may also be stripped or rounded due to improper removal or installation. If the screw is damaged, lost, or corroded in place, it will need to be replaced. In most cases, removal will require nothing more than a Phillips head screwdriver or the appropriately sized socket with a ratchet. However, if the screw is damaged, it may require a tap set to remove it from its mounting location. Note that this is a genuine OEM replacement screw made from durable, high-quality metal, and is sold individually. It fits Whirlpool, Maytag, Roper, Estate, Amana, Crosley, and Thermador appliances. It is used in over 150 machines, ranging from washers and dryers to air conditioners.
VERY EASY TO REPLACED OLD COVER-UNIT NEW COVER-UNIT. Read more
Covers and protects your refrigerator's light source. Replace if cracked, yellowed, or missing to restore clear illumination. Confirm fit by model number.
Molded housing that shields the infrared emitter in your refrigerator's ice level optics system. Replace if cracked, broken, or missing to protect the board.
Your video was perfect without it I would of never been able to repair my ice maker Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.