Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Door Gasket is an OEM part for GE dishwashers. It forms a seal between the dishwasher door and tub which is critical for proper operation. The gasket ensures excess water and moisture do not leak from the dishwasher during active wash and rinse cycles. It also helps keep noise levels low by providing sound insulation. This gasket measures 3/8 x 89 inches.
Common causes of a bad door gasket include regular wear and tear, exposure to high temperatures and detergents, or physical damage. These factors can cause the gasket to lose its flexibility and sealing capability.
Symptoms of a bad Door Gasket include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
After researching on the APP site, I decided what I thought I would need and purchased a new Gasket, Gasket Insert, Left & Right Corner Baffles from APP. The parts were shipped immediately. However, I’m an 80 yr. old female so I procrastinated for almost 6 weeks before deciding to 'tackle' the repair myself rather than hiring an appliance repair person or "handyman". I went back into the AppliancePartsPros site and reviewed the wonderful videos related to the repair since Matt had made it... Read more
Creates a watertight seal around your dishwasher door to prevent leaks during wash cycles. Replace if cracked, worn, or leaking. Verify fit with your model.
Ordered new one online. It came in 2 days with instructions. I installed it and works great. Read more
Replacement upper dishrack for dishwashers. Installs in the top position to hold plates, bowls, and glasses. Replace if rusted, cracked, or broken.
Found the correct racks on Appliance Parts.com. They shipped as promised. When I received them, however, I couldn't figure out how to replace the top rack. Didn't know how to get the end cap off Sooo - I went back on the website and watched the repair video and voila - was easy. All that was required was a flathead screwdriver and the knowledge of where to use it!!! Replacements in the dishwasher in 5 minutes or less. Great website and very helpful videos. I will recommend this website to... Read more
Dishwasher not filling with water or leaking during cycles? The water inlet valve controls water flow. DIY-friendly repair, typically 10-30 minutes.
I took the inlet valve apart, found it was clogged with sediment, so I cleaned it and reinstalled it. Water was still not filing, so I figured the valve was sticking. I ordered a new valve,because $30 was a lot cheaper than a new dishwasher. I took out the old valve with two screws, and disconnected the supply line, the brass elbow, one hose, and a wiring harness. I reattached it in the same place, re-using the all the other parts, and once I turned the power and water back on, it worked as... Read more
Dishwasher detergent cup won't stay closed or won't open fully? This soap dispenser lever controls detergent release. DIY repair in 15 minutes.
First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then... Read more
Replacement silverware basket with handle for your dishwasher. Needed when original basket is cracked, broken, or has worn holes that let utensils fall through.
We ordered the item appliance parts pros said would fit our make/model. the part arrived in perfect condition faster than i could possibly imagine, and while it fit our machine, it was a big bigger than the original and it fits off-center, but i guess it works fine! excellent speed and ease of ordering. thanks Read more
Detergent cup won't stay closed? This dispenser latch secures the detergent cup during wash cycles. Direct replacement part with video guide available.
The Fill Cap Assembly is an OEM part for GE dishwashers. This assembly includes the cap that covers the opening where rinse aid or other additives are poured into the dishwasher. It ensures that the additives are securely contained and properly dispensed during the wash cycles, contributing to effective cleaning and drying.
Over time, the fill cap assembly can become damaged due to regular use, exposure to cleaning agents, or accidental mishandling. A compromised fill cap can lead to leaks or improper dispensing of rinse aid, affecting the dishwasher's performance.
Symptoms of a bad fill cap assembly include:
1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve. Parts $220 for Dishwasher Estimated Labor $400.00 Labor $0.00 Parts $100.00 for Pullout Faucet Estimated Labor $175.00 Labor $0.00 Read more
If your dishwasher won't start or the door won't lock, the door latch assembly is likely failed. DIY-friendly repair takes about 30 minutes to replace.
With the power to the dishwasher on, I removed the six or seven screws holding the door panel together. With the door separated, I manually moved the switch which should close when the dishwasher latch closes. This illuminated and activated the control panel telling me that the problem was in the door latch. I purchased a new latch from appliance parts pros and installed it. Very easy fix for a homeowner, taking thirty minutes. Read more
Replace broken or missing lower dishrack rollers and axles. Attaches to the bottom rack for smooth gliding when loading dishes. Sold as one roller kit.
I found my parts and ordered the six I needed, however I did not pick up on the difference from the front wheels to the rear wheels in the the descriptions. The rear wheels are narrower and I ordered all front wheels, six fronts instead of four front and two rear. I made it work by using the axle from the new wheel with two old narrow wheels. Read more
Note: This is the complete solenoid assembly kit. For armature & linkage assembly only, use WD1X1316.
The Solenoid Assembly is an OEM part for GE dishwashers. It plays a crucial role in controlling the flow of water into the dishwasher by activating or deactivating the drain valve. This assembly is essential for ensuring that the dishwasher fills and drains at the correct times during the wash cycle, which is pivotal for the overall efficiency and effectiveness of the appliance.
Common causes for a Solenoid Assembly to fail include wear and tear over time, mineral buildup from hard water, or electrical failures that prevent the solenoid from operating as intended.
Symptoms of a bad Solenoid Assembly include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Put in the new parts and now it does not leak anymore. Very simple Read more
Dispenser won't close or stay shut? This dishwasher detergent cup cover securely latches to prevent mid-cycle opening. Moderate DIY repair, 1 hour.
Although I ordered the latch, lever and a new cup and replace the original pieces the dispenser still did not close. On further inspection it turned out to be a small spring that had fallen out of place. Once the spring was reconnected the dispensing cover worked fine. I'm still happy that I replaced the entire assembly with new parts regardless. Discovering the loose spring took the most time. Read more
Replacement spring for dishwasher detergent cup door assembly. Provides tension to keep cup door latched closed. Replace if broken, stretched, or lost.
Dishwasher leaking from the bottom? A cracked or worn inlet sump causes water leaks during wash cycles. Moderately difficult repair with video guidance.
Replaced with a new Inlet Sump [WD18X213]. It was a little tedious, attaching the Inlet Sump, back to the pump, because I did the job with the dishwasher in place (not pulled out). My dishwasher was plumbed with copper pipe, so I really didn't want to upset that. Also, I had previously replaced the motor and the pump in this dishwasher, so I was familiar with how the Inlet Sump attached to the pump. Again, it's very tight working under the unit while it is still in place, and I wouldn't... Read more
Replace a cracked, rusted, or broken upper dishrack to restore secure organization for cups, glasses, and bowls on your dishwasher's top level.
Replaced the upper and lower racks. AppliancePartsPro shipped the racks fast and they are a perfect fit. I think they're even a better, stronger design then the factory originals. Read more
The Dishwasher Door Cable is an OEM replacement part for GE dishwashers. It works with the door latch assembly to ensure secure closure of the dishwasher door. The cable is responsible for connecting the door handle mechanism to the latch, allowing users to easily open and close the door with a gentle pull or push. Note: It is recommended to replace both at the same time.
Symptoms of a bad door cable include:
Causes of a bad cable can be frequent use that results in wear and fatigue of the internal wiring over time. Damage from harsh detergents or excess moisture can also compromise the cable.
This OEM GE replacement part is compatible with models from Hotpoint, RCA, and some Kenmore dishwashers as well.