Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix interior lights that won't turn on, stay on constantly, or delay when opening the door. This switch replacement takes 10-15 minutes with basic tools.
Our refrigerator takes care of my wife and I, along with our children when they visit, and the grand kids. Over the years, it's seen its fair share of wear and tear. Thankfully, nothing major has happened that hasn't been able to be repaired right here in the home, and by me. Our refrigerator is a GE side-by-side with an ice maker/water dispenser, and has held up well. I've ordered parts for it from AppliancePartsPros.com for all of its repairs, and while GE/Frigidaire have been changing out a... Read more
Fix no water to ice maker or leaking water valve issues. Controls water flow to ice maker and dispenser. Moderate DIY repair, 30-45 minutes.
1.) Located where the water leak was coming from in the refrigerator. 2.) Unplugged the refrigerator. 3.) Shut off the water supply to the refrigerator. 4.) Unscrewed the back cardboard panel. 5.) Unscrewed the Water Valve attached to the side of the refrigerator (one screw). 6.) Disconnected the three electrical plugs on the water valve. The plugs are different sizes so there is no need to worry about reconnecting incorrectly. 7.) Disconnected the two water lines by pushing down on... Read more
The Bottom Pan Assembly is an OEM part for GE refrigerators. This part provides a functional storage solution within the appliance. This assembly typically serves as the crisper drawer or bottom shelf, offering a designated space for fruits, vegetables, or other items that require specific temperature conditions to maintain freshness.
Causes of a bad bottom pan can vary from overloading the pan with heavy items, accidental damage during cleaning or use, or material degradation over time.
Symptoms of a bad Bottom Pan Assembly include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered a new meat pan. It arrived in 3 days. Fit right into the old pan space. Easy as pie!!! Read more
Fix frost buildup or uneven cooling in your refrigerator. This defrost thermostat regulates evaporator temperature to prevent ice accumulation.
I am a home owner with no technical experience on doing refrigerator failures diagnostic/repair. So, I look for internet DIY type of help describing the symptoms. I found recommendations from Appliance Parts Pros going from the easy to the complex potential parts failures and decided to order the compressor start relay and the compressor overload. While waiting for the overnight delivery, came to my mind and decided to look to the freezer compartment and found frost all along the coils panel.... Read more
Ice won't dispense from your refrigerator door? A cracked bucket or broken auger is often the cause. This assembly restores ice dispensing function.
At first I purchased just the auger but instructions showed too difficult for me so I bought the bucket with auger. Read more
Plastic tube that connects the water tank to the dispenser and ice maker. Replace if cracked, leaking, or damaged to restore proper water flow in your fridge.
We noticed a puddle of water in front of the fridge a couple of months ago-dried the floor up both times and thought someone had dropped ice-or spilled water. A couple of weeks ago there was water dripping through the dropped tile ceiling in the basement. I shut off the water for the water supply to the fridge at the copper pipe in the basement and removed some of the tiles which felt a little damp. It still dripped all day. When my spouse came home he pulled down more of the tiles. It was as... Read more
Ice won't dispense or humming noise? The auger motor powers ice movement from maker to dispenser. DIY repair in 30 minutes with video guide.
This was a two and half year issue as different things failed at different times. I would get one part, then another would fail. Ultimately, I got to a point where what failed, I hadn't been ordered the part yet. The seal on the freezer door took three bathing's before it plumped up and un-creased. The directions on the box it is shipped in said to heat the seal up in hot water then cool it down with tap water. I didn't need to do that. It took a lot of massaging of the seal, but... Read more
Fix a refrigerator that won't cool or clicks but doesn't start. This compressor start relay and overload protects against electrical issues. DIY-friendly.
WENT TO YOUTUBE FOUND OUT HOW TO TEST THE COMPRESSOR IT TESTED GOOD SINCE IT WAS NOT THE COMPRESSOR I ORDERED THE PARTS THAT WOULD MAKE IT WORK AGAIN - THE CAPACITOR & OVERLOAD PTCR COMBO I INSTALLED THE PARTS NOW I HAVE A FRIG. THAT'S WORKING AGAIN.AT A FRACTION OF THE COST TO REPAIR- THANK'S TO YOUTUBE. Read more
Secures and seals water line connections in your refrigerator's dispensing system. Replace if leaking or loose to prevent water damage. Confirm fit.
Replacement of the evaporator fan motor, fan blade, and grommets. The amount of disassembly to reach the part took most of the effort Read more
Dispenser arm kit installs in the refrigerator door to activate ice and water flow. Replace if the arm is cracked, broken, or won't spring back properly.
Replaced both with the parts ordered from Appliance Parts Pros. Read more
Plastic shield that covers the water and ice dispenser housing on your refrigerator door. Replace if cracked, warped, or broken from impact or heat damage.
BEWARE THE HAIRDRYER In an effort to unfreeze the indoor water supply line with a hairdryer the extreme heat deformed not only the activator paddle but the housing that surrounds it. In the time it took to order and install replacement parts the frozen blockage had thawed. Back in business for now and if the problem reoccurs I will be looking for a different path to resolve the issue. Read more
Refrigerator freezing food? A faulty damper assembly causes constant cold air flow to the fresh food section. DIY-friendly repair, under 1 hour.
I went on line and read your advice page. Based on that, I removed the damper assembly (six screws counting the miserable light fixture) and found the damper door broken as predicted. I went back to your page and ordered the new part. Nice breakdown to get number. After that, I disassembled the damper assembly, found that the ABS plastic damper had broken from the actuator probably as a result of fatigue from cycling back and forth for twelve years. I used super glue to re-attach the damper... Read more
The Light Socket is an OEM part for GE refrigerators. It is responsible for holding the refrigerator's light bulb and ensuring it receives power to illuminate the interior when the door is opened.
You should replace the light socket if it becomes faulty. Causes of a bad light socket can include wear and tear from regular use, electrical issues such as short circuits or power surges, and corrosion from moisture exposure.
Symptoms of a bad light socket include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I researched the model and watched a YouTube video on the repair. I ordered the part. Two days later it arrived and I made the repair. I'm all thumbs in home repairs, but had it done in 5 minutes. My husband was surprised. Nice that I can take care of a few simple repairs around the house. Read more
Refrigerator running hot or making loud noises? A worn condenser fan blade prevents proper airflow across coils. DIY repair in 30 minutes or less.
Condenser fan stopped on my big 2003 Monogram 4 foot wide ZIS480D Refrigerator. It is top mounted. The fridge had to be rolled out. 20 screws removed and the top sheet metal to get at the condenser. That was the only way to get at it. Works like new now. Read more
Rattling noise or warm temps? A broken evaporator fan blade disrupts air circulation. This repair takes 30-45 minutes with basic tools and our video guide.
The Humidity Control is an OEM part for GE refrigerators. This component regulates the humidity levels within the crisper drawers, ensuring optimal conditions for preserving the freshness and longevity of fruits and vegetables. By controlling the humidity, it helps to prevent produce from drying out or becoming too moist.
Causes of a bad humidity control can include mechanical failure, damage from spills or impacts, and wear and tear over time. Additionally, issues with the connecting cables or electronic controls can also lead to malfunction.
Symptoms of a bad humidity control include:
Replaced two drawers, one shelf front, and the grille base Read more