Gtwn4950lows Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Ge part

Tub Seal

4.8 (122)

By: Ge

Part Number: WH02X10383

This Tub Seal is an OEM replacement part for GE washing machines that is responsible for preventing water from leaking from the tub. This part is located at the base of the washing machine tub and creates a seal between the tub and the transmission to prevent water from leaking out during the wash cycle.

This part fixes the following symptoms-

Water leaking from the underside of the washing machine.
A musty or mildew smell coming from the machine.
Unusual noises during use.

Causes of a bad tub seal can range from normal wear and tear to a misaligned tub or an overloaded washing machine, which puts extra pressure on the seal. Additionally, the buildup of hard water minerals can degrade the seal's material over time.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Various noises during opertation extremely loud grinding noise during spin cycle Dennis S. • Chelmsford , MA • November 27, 2017

I put this repair off for a long time because I knew the machine would have to be completely torn down to fix it. The repair videos give you the impression that this condition is caused by a bad 'Tub Bearing' which takes a long time to replace but only costs about $15. Don't be lulled into thinking you can fix this for $15. The 'Tub Bearing' is really only a bushing. The one I removed from my washer looked fine but I replaced it anyways. The real problem here is GE's poor design which allows a... Read more

$10.95

Compare At:: $13.14
You Save:: $2.19

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Tub Bearing

4.7 (114)

By: Ge

Part Number: WH2X1198

The Tub Bearing is an OEM replacement part for GE washing machines. It is a critical component that supports the weight of the inner tub and allows for smooth rotation during the wash and spin cycles.

Causes of needing to replace the tub bearing include general wear and tear over time, exposure to excessive loads or unbalanced loads, or physical damage from impact or debris.

Symptoms of a bad tub bearing include:

Loud grinding or rumbling noises during the wash or spin cycle
Excessive vibration or shaking of the washing machine
Leaks due to increased stress on the tub and other components

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Ge washer was very loud during spin cycle Vincent B. • Merrick , NY • January 31, 2016

After researching the problem on this site, I realized that the most likely cause was a bad bearing contained in the shaft & tube assembly. Essentially, the tub seal failed & allowed water to travel down the shaft & into the housing containing the bearing. I confirmed this by pulling the front cover off of the unit & noticed some brown water pooled directly under the shaft & tube assembly. I followed the disassembly instructions on this site & it wasn't too bad but did take some time as pretty... Read more

$28.95

Compare At:: $34.74
You Save:: $5.79

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Tub Bearing Washer

4.7 (100)

By: Ge

Part Number: WH2X1197

This tub-bearing washer is an OEM replacement part for GE washing machines. It is designed to keep your washing machine's inside tub spinning smoothly during cycles. The bearing Measures approximately 1 inch in inner diameter and 2 inches in outer diameter.

Causes of a bad tub-bearing washer can include wear and tear from extended use. Exposure to vibrations during high-speed spins may cause fatigue of the washer material over time as well.

Symptoms of a bad tub bearing washer include:

Excessive tub vibration or imbalance at high speeds
Abnormal noises such as grinding or clicking sounds
Premature failure of the tub bearing itself
Reduced spin capabilities or inability to hit maximum RPM

This OEM part is also compatible with Hotpoint, RCA and select Kenmore front-load washers.

Do-It-Yourself Stories from Customers like You Ge washer making loud roaring noise during spin cyc;e Gerald P. • Auburn , GA • January 28, 2018

I had never worked on a washing machine before but after watching the online videos I felt like I could do the repair. I was almost positive it was the Mode Shifter and Shaft Assembly that was bad. I could hear the bearing making a grinding noise when I turned the tub by hand. I ordered the part I needed plus additional parts that could be an issue later such as a drive belt, tub bearing, tub seal, tub nut, split ring, etc; Preventive maintenance that would keep from having to tear it all... Read more

$6.53

Compare At:: $8.36
You Save:: $1.83

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Drain Hose

4.9 (176)

By: Ge

Part Number: WH41X10096

The Drain Hose is an OEM part for GE washing machines. It plays a crucial role in expelling used water from the washer to the household drainage system. If you need to replace the drain hose clip as well, order part number WH16X513.

Causes of a bad Drain Hose can include physical damage such as splits or holes, clogging from lint and debris, or deterioration due to age and frequent exposure to water and detergents.

Symptoms of a bad Drain Hose include:

Water leaking from the back or underneath the washing machine,
Slow or incomplete drainage during or after the wash cycle,
Visible signs of wear or damage on the hose.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Leaking washer drain hose Oliver C. • Linwood , NJ • July 16, 2014

Replaced hose with new one from Appliance Parts. Delivery was exceptionally fast. Appliance was up and running next day. Read more

$17.95

Compare At:: $24.06
You Save:: $6.11

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Drive Belt

4.8 (145)

By: Ge

Part Number: WH01X10302

The Drive Belt is an OEM part for GE washing machines. This belt is responsible for connecting the motor to the drum, enabling the drum to spin during the wash and spin cycles. For the belt install tool, order part number WX05X20641.

Causes of a bad drive belt can include regular wear and tear from normal usage, overloading the washing machine, or exposure to harsh conditions that cause the belt to crack or fray. When the drive belt is compromised, it can affect the overall performance of the washing machine.

Symptoms of a bad drive belt include:

The drum not spinning or spinning inconsistently
A burning smell during operation
Unusual noises such as squealing or thumping
The washing machine stopping mid-cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Spins slowly
Will not agitate

Do-It-Yourself Stories from Customers like You Ge washer was very loud during spin cycle Vincent B. • Merrick , NY • January 31, 2016

$18.72

Compare At:: $22.46
You Save:: $3.74

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Tub Dampening Strap (Washer), 2-Pack

4.9 (160)

By: Ge

Part Number: WH01X39337

This tub dampening strap stabilizes the washer's inner tub during agitation and spin to control vibration and sway. Replacing worn straps restores proper suspension control for smoother, quieter operation and helps prevent the tub from impacting the cabinet. What it does:

Connects the tub to the cabinet to limit excessive movement during spin
Controls vibration and helps prevent the tub from striking the cabinet
Replace if a strap is broken, stretched, or missing
Symptoms can include loud banging, severe shaking, or the washer "walking"

What's included:

Two tub dampening straps

Install notes:

Unplug the washer and turn off water supply before servicing
Support the tub to relieve tension, then unhook the old straps from the cabinet and tub ring
Install new straps on the original mounting points; replace in pairs to keep the tub balanced
Run a test spin and verify smooth, stable operation

Do-It-Yourself Stories from Customers like You GE washer sounded like jet engine during spin cycle Scott V. • Centreville , VA • August 26, 2020

My 9-year-old GE washer, in which I replaced the motor two years ago, developed an extremely loud roaring sound during the spin cycle. After reviewing stories here to pinpoint the problem, I replaced the tub bearing, mode shifter, and tub seal. I also installed a new tub nut, split washer, and belt. This repair involves taking the washer apart in order to get at the tub bearing and mode shifter, which are inconveniently located in the very center of the machine. I bagged labeled all the... Read more

$19.80

Compare At:: $22.00
You Save:: $2.20

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hub Nut

4.8 (135)

By: Ge

Part Number: WH2X1193

The Hub Nut is an OEM part for GE washing machines. This component secures the inner tub to the drive mechanism, ensuring that it remains in place during the agitation and spinning cycles. This lock-down nut is reverse threaded, meaning that it is loosed by rotating it clockwise. For easier removal of the old nut, it is recommended to use the tub nut spanner wrench WX5X1325.

Symptoms of a bad Hub Nut include:

Unusual noises like banging or grinding during the spin cycle.
The inner tub moving excessively or becoming loose.
Leakage around the center of the machine, indicating a seal failure possibly related to a loose hub nut.
Inefficiency in spinning or agitating clothes properly.

Causes of a bad hub nut can include corrosion due to exposure to water and detergent, improper initial installation, or loosening over time from the vibration and movement of the washing machine.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Ge washer making loud roaring noise during spin cyc;e Gerald P. • Auburn , GA • January 28, 2018

$12.95

Compare At:: $22.39
You Save:: $9.44

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Drain Pump

4.9 (204)

By: Ge

Part Number: WH23X10030

The Drain Pump is an OEM part for GE washing machines. It is responsible for removing water from the washer's tub at the end of each wash cycle, ensuring that your laundry is properly drained before the spin cycle. This pump helps to prevent water from sitting in the tub, which can lead to mold and mildew.

Symptoms of a bad Drain Pump include:

Water not draining out of the washer, leading to stagnant water pooling in the tub.
Unusual noises during the drain cycle, indicating a struggle or failure to operate.
The washing machine stopping abruptly before or during the drain phase.

Causes of a bad drain pump can include blockages from small garments or debris, mechanical failure from wear and tear, or electrical issues that affect the pump's power supply.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Will not drain

Do-It-Yourself Stories from Customers like You Water pump on washer went bad Joshua B. • Morrow , OH • March 19, 2017

I ordered a new pump on this website. They provided me with written directions as well as a video to follow along with on how to change the pump. As always it wasn't as easy as the video, but that was the mechanic no the tool! Great job on the service. Will order parts from here again. Read more

$55.66

Compare At:: $82.48
You Save:: $26.82

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hub Washer

4.8 (61)

By: Ge

Part Number: WH2X1199

The Hub Washer is an OEM part for GE washing machines, designed to fit between the transmission and the inner tub. The hub washer acts as both a seal and a buffer, reducing wear on both the transmission and the tub by absorbing some of the operational stresses.

Causes of damage to the hub washer often include normal wear and tear from repeated use, exposure to harsh detergents or water conditions that can degrade the material, or overloading of the washing machine, which puts additional stress on mechanical components.

Symptoms of a bad Hub Washer include:

Leaks from the bottom of the washing machine
Unusual noises during the wash or spin cycles, such as grinding or squeaking
Difficulty in agitating or spinning, which could be caused by excessive friction or misalignment due to a worn or damaged hub washer.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Ge washer making loud roaring noise during spin cyc;e Gerald P. • Auburn , GA • January 28, 2018

$11.95

Compare At:: $14.34
You Save:: $2.39

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Drain Hose Clip

5.0 (84)

By: Ge

Part Number: WH16X513

The Drain Hose Clip is an OEM part for GE washing machines. It secures the drain hose to the back of the washer, preventing it from becoming dislodged during operation. This ensures that water is properly directed out of the washer and into the household drain system, preventing leaks and water damage.

Causes of a bad drain hose clip can include wear and tear from regular use, damage from improper handling during installation or maintenance, or breakage due to repeated stress and movement of the washer.

Symptoms of a bad drain hose clip include:

Water leaking from the back of the washer
Drain hose detaching or becoming loose during operation
Difficulty securing the drain hose in place
Visible damage or cracking on the clip

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: For the entire drain hose, use part number WH41X10096.

Do-It-Yourself Stories from Customers like You Discharge hose for 15 year old hot point washer Edith P. • Shelton , CT • October 06, 2014

The fix was so easy 2 screws and done, the part i ordered came the following day, i didnt expect it to arrive for another 3 to 4 days, excellent service , shipping, recieved the correct parts, and they have everything in stock, i would recommend Appliance Parts Pros to everyone, you wont be let down, believe me, thank you for the fast service, i give them 10 stars, Read more

$6.53

Compare At:: $8.36
You Save:: $1.83

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Lid Switch Assembly With Wire Harness

4.9 (56)

By: Ge

Part Number: WH12X10334

The Lid Switch Assembly with Wire Harness is an OEM part for GE washing machines. This assembly is crucial for the safe and effective operation of the washer, as it detects whether the lid is closed and allows the machine to operate only when the lid is securely shut. It also helps to control the washer's functions during the spin and agitation cycles.

Causes of a bad lid switch assembly can include regular wear and tear, electrical issues, or physical damage due to forceful closing of the lid. A faulty lid switch can prevent the washer from operating properly or stop it mid-cycle.

Symptoms of a bad lid switch assembly include:

The washer not starting or stopping mid-cycle
The machine not spinning or agitating
Error codes related to lid or door issues
The washer filling with water but not proceeding to the wash cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Would not spin or agitate Jason F. • Lebanon , CT • October 11, 2014

Replaced lid switch assembly Read more

$25.75

Compare At:: $32.08
You Save:: $6.33

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Pressure Switch Hose

4.7 (43)

By: Ge

Part Number: WH41X365

The Pressure Switch Hose is an OEM part for GE washing machines. It connects the pressure switch to the tub, allowing the switch to monitor the water level within the washing machine. This ensures the proper amount of water is used during each cycle for efficient washing and rinsing.

You should replace this pressure switch hose if it becomes cracked, clogged, or otherwise damaged. Common causes of a bad hose include wear and tear from repeated use, buildup of detergent or debris, and damage from improper handling or installation.

Symptoms of a bad pressure switch hose include:

Washing machine not filling with water
Overfilling or underfilling of the tub
Inaccurate water level detection
Error codes related to water level issues

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Will not stop filling with water

Do-It-Yourself Stories from Customers like You Water level shutoff switch did didn't work allowing the washer tub to overfill William H. • Papillion , NE • March 22, 2015

I replaced the water level switch and hose. After removing the hose, I found that it was clogged, and did not allow the water level to be sensed by the switch. A test after the replacement of the parts was successful. While filling the tub, the water shut off at the small, medium, and large levels as indicated by the switch. Read more

$11.33

Compare At:: $13.48
You Save:: $2.15

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Button

4.9 (25)

By: Ge

Part Number: WH01X10088

The Button is an OEM component for GE top-load washers. Located on the control panel, this button actuates a specific function such as starting or pausing the cycle. Designed for durability, the textured plastic construction withstands millions of presses over decades of use.

Symptoms of a bad button include:

The button sticking in the depressed position
Failure to trigger the assigned function when pressed
Cracks developing in the plastic face over time

Causes may consist of cracked circuitry behind the panel from water intrusion or repeated impact. General wear reducing button sensitivity also occurs.

This GE button restores full operation for select models including those by Hotpoint, RCA, and compatible Kenmore lines.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You The posh button was gone Steven B. • Ute , IA • April 17, 2015

All I had to do was remove 3, 1/4" screws from the back and take the front off. Two 5/16th screws hold the circuit board in place, remove them and press the button into the hole from the back. Replace the circuit board, slide the front back on and install the three 1/4" screws. Always unplug the washer first! Read more

$13.66

Compare At:: $16.12
You Save:: $2.46

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Drain Pump Inlet Hose

5.0 (31)

By: Ge

Part Number: WH41X22935

The Drain Pump Inlet Hose is an OEM part for GE washing machines. This hose plays a crucial role in the laundry process, ensuring that used water is efficiently removed from the washer, which helps in preventing standing water, odors, and potential mold growth inside the appliance.

Causes for issues with the drain pump inlet hose often involve natural wear and tear from constant exposure to water and laundry chemicals, physical damage from overloading or moving the washer, or blockages from lint, small garments, or other debris.

Symptoms of a malfunctioning Drain Pump Inlet Hose include:

Water leaking from the bottom or back of the washing machine
Slower than normal drain times, indicating possible clogs
Visible wear, cracks, or damage to the hose

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Drain hose was leaking Haide H. • Chatham Township , NJ • May 01, 2017

The video was very helpful. the hardest part is getting off old rusted parts. I had to use a hacksaw to remove one of the old clamps. I had to open the bottom of the washing machine to remove of the other clamp. Putting the new parts on was easy. Getting everything apart was a challenge. Putting the new parts on was an easy 5 minute job. Read more

$12.37

Compare At:: $14.71
You Save:: $2.34

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Valve Triple Water

4.9 (51)

By: Ge

Part Number: WH13X10037

The Valve Triple Water is an OEM part for GE washing machines. This valve controls the flow of hot, cold, and warm water into the washing machine, allowing for precise temperature settings during wash cycles. It ensures that the correct amount of water at the desired temperature is delivered to the washing tub for optimal cleaning performance.

Causes of a bad triple water valve can include mineral deposits or debris blocking the valve, wear and tear from regular use, or electrical failures affecting the valve's solenoids. A malfunctioning valve can disrupt water flow, leading to issues with washing performance and water temperature control.

Symptoms of a bad triple water valve include:

Washing machine not filling with water
Incorrect water temperature during wash cycles
Water leaks from the valve area
Inconsistent or slow water flow into the machine

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dripping water when not running John S. • Richardson , TX • January 13, 2015

Replaced solenoid valve. Repair summary: Turn off H/C water supply, disconnect hoses. Unscrew 3 screws rear of main panel. Slide front panel laterally then pull up to remove. Unscrew 2 screws on solenoid valve part. Disconnect spade electrical connectors and remove defective part. Insert new part and do everything I just said in reverse. It was so easy a drunken monkey could have done it. Read more

$65.95

Compare At:: $78.48
You Save:: $12.53

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Suspension Rod & Spring Assembly

5.0 (10)

By: Ge

Part Number: WH16X544

The Suspension Rod & Spring Assembly is an OEM part for GE washing machines. This assembly includes a rod and spring that supports the washer tub, helping to absorb shocks and reduce vibrations during the wash and spin cycles.

Causes of a bad suspension rod & spring assembly can include wear and tear from regular use, excessive loads that strain the components, or damage from impact or mishandling.

Symptoms of a bad suspension rod & spring assembly include:

Excessive shaking or vibrating during the wash cycle
Loud banging or thumping noises
The washer tub being off-balance or tilted
The washer moving or "walking"

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Agitation and spin cycle completely stopped Tonya G. • Philadelphia , PA • September 02, 2020

I have a 14 year old GE washing machine that had been making a lot of noise while running but had eventually just stopped flat. The agitator and spin cycle would not run. I found this site and made excellent use of all the repair videos to study about my issue. I put in my machine model number and I Immediately was able to start honing in on what my problem could be from website advice about popular repair parts, stories others had shared about their similar machine issues and watching videos,... Read more

$42.95

Compare At:: $51.54
You Save:: $8.59

IN STOCK

Ships Monday Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Gtwn4950lows Parts

Tub Seal

Tub Bearing

Tub Bearing Washer

Drain Hose

Drive Belt

Tub Dampening Strap (Washer), 2-Pack

Hub Nut

Drain Pump

Hub Washer

Drain Hose Clip

Lid Switch Assembly With Wire Harness

Pressure Switch Hose

Button

Drain Pump Inlet Hose

Valve Triple Water

Suspension Rod & Spring Assembly