Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Oven overheating or not holding temperature? A faulty temperature sensor is often the cause. This probe monitors oven cavity heat for accurate baking.
Parts received quickly from APP and in good condition. Oven Sensor was very easy to install and fixed our problem. It appears (only a couple days of using), and the new cooling fan is so quiet you can't tell it is on. The install of the fan was a bit more involved and all videos did not represent our JennAir oven/microwave combo wall unit. Very happy with service, products, and overall experience this far. Will return for future parts when needed. Read more
Fix loud sawing noise or error code 4d21/4d22 in your oven. This tangential cooling fan motor restores proper airflow. Moderate difficulty repair.
I replaced the cooling fans (the upper one was totally burned out). Oven (13 years old) works like new now. Read more
Self-tapping screw used in range assembly. Features 8-18 thread size and 0.375 inch length. Also used in some washer models as cross-appliance hardware.
I replaced all three baffles since the new one was a different design than then old one. i watched the video and the repair went well, except for hitting my hand with a hammer while removing the old baffles. went just like the video said it would Read more
Microwave not heating but still running? The magnetron controls heating function. DIY repair in under 2 hours with basic tools and multimeter testing.
I am not an appliance repair man. I am a general surgeon. I went online and researched the problem. The consensus was that my magnetron and diode were the most likely culprits. To replace my microwave with a comparable model would have cost at least $800. The diode and magnetron cost around $170. I watched a few videos on YouTube demonstrating how to do the repair safely and I felt like I could do it. I ordered the parts on a Monday evening and had them Wednesday. The only difficult part of... Read more
Replacement hinge that supports and controls your oven door movement. Install if your hinge is cracked, springs are weak, or door won't align properly.
Removed oven door, took door apart replaced oven hinges. Pulled oven out of recess to access hinge receptacle. Replaced hinge receptacle. Read more
Illuminates oven interior for monitoring cooking without opening the door. Replace if light fails, socket cracks, or bulbs blow frequently. Verify fit.
I ordered the replacement light module and install it. I was able to install the module without removing the walloven from the cabinet. Thank you for quick delivery of the module. Read more
Replace your worn oven door gasket to improve heating efficiency and prevent heat loss. Restores proper seal between door and cavity. Confirm fit by model.
I replaced the old control panel with a new one. I also changed out the door seal to help prevent the control panel from going bad a second time. It was the heat from the oven getting to the keypad on the control panel that caused it to go bad. Read more
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more
Fastening screw for securing components inside appliances. Replaces lost, stripped, or damaged screws during repairs or part installations.
Bought and installed new hinges. Repair took about an hour but I also cleaned all the glass inside and out on both oven doors. I had ordered extra screws as I read the old ones that hold the hinges were hard to get in as they were self taping but the screw labeled 5 next to the hinge were not the right ones. All old screws worked fine. You just need to put a little power to them to get them started. Easy repair. Read more
Restores interior lighting in your microwave oven. Replace when bulb burns out to regain visibility while cooking. Verify fit using your model number.
Ordered and recieved new bulb, called help desk to find how to access the bulb. Found I needed a tamper proof torx bit to remove cabinet screws. After buying bit the job was a snap! Thanks to Appliance Pro. comm and their 24 hr. help line Read more
This screw-and-washer fastener is a factory-size 8-18 x 5/16 hardware piece used to secure appliance panels and components. Replace stripped, rusty, or missing hardware to restore a tight, rattle-free fit and proper alignment. What it does:
I removed the burners, which were rusted and needed some tapping.They were pretty stubborn to remove from the insert. I removed the spark igniters, which were rusted where they screwed into the burner and then removed the venturi tubes.. Once this was done, I installed the new igniters to the underside of the new burner. I then installed the burners, which only took simple placement and a quarter turn to lock them in. I then hooked up the igniter wire to the new spark igniters. The repair... Read more
Color: clear. Measures about 3 inches in diameter.
Troubleshot the oven by checking the broiler which worked good (same fuel valve). After reading the some tips about troubleshooting the Glow Ignitor I could see the broiler ignitor got white hot and the oven ignitor only got bright orange (orange to red causes intermittent ignition or mini explosions). Watched the how to video and it was good information. You should be observant about which openings in the back of the oven as to where the two wires are coming out of. My oven is over 12 years... Read more
Microwave glass turntable tray. Color: clear. Measures about 13 inches in diameter.
Put a new one in. Read more
This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.
After being told by a service repairman that it would cost me close to $200 to repair, I resolved to just not use the dispenser. After about a year, I had decided that I wanted to repair it and would look at the options myself. At the least, I could figure out which parts were needed to repair it and have them on hand for a service guy if I determined I could not do the job myself. The more I studied it, the more I felt confident that I could do it, and sure enough, when the part arrived - a... Read more
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Replaced It With New One Read more
Replace cracked, broken, or shattered inner door glass on your oven. Installs between door panels in the window frame assembly. Reuses existing frame.
Removed 3 screws on top of door, 3 screws on bottom if door which released glass front. Then removed 4 nuts on sheet metal window cover to get to window. To get to the broken glass there was one tab on the corner of the window frame that had to be bent upward to loosen the frame. Removed the broken glass, slid in the new glass, re tightened the frame and put everything back together. It took me a little longer than it should have because I forgot the reverse order for putting it back... Read more