Kenmore He2 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Washer Door Strike

4.9 (26)

By: Whirlpool

Part Number: WP8540221

The Washer Door Strike is an OEM part for Whirlpool washing machines. It serves as a component in the locking mechanism of the washer door, engaging with the door latch to secure the door during operation. This ensures that the machine can safely perform its cycles without risk of opening mid-wash, which could result in water spills and interrupted washing processes.

Symptoms of a failing Washer Door Strike include:

The washer door not closing or latching properly
Water leaking from the front of the machine
The washing machine refusing to start due to the door not being recognized as closed

Causes of damage to the door strike typically involve physical impacts, such as slamming the door too hard, or general wear and tear that degrades the integrity of the strike over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Lid or door won't close
Lid or door will not open

Do-It-Yourself Stories from Customers like You Door latch broke while closing door Julie L. • Modesto , CA • March 13, 2016

I removed the two screws and all the pieces that were broken. Went online to Appliance parts.com, searched for the part using the model number from the machine and ordered the part . part arrived in 2 days and with a Phillips screwdriver was installed in less than 5 minutes. Read more

$11.49

Compare At:: $13.56
You Save:: $2.07

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Leveling Foot

5.0 (48)

By: Whirlpool

Part Number: 49621

The Dryer Leveling Foot is an OEM part for Whirlpool dryers. It is designed to support and stabilize the dryer by allowing adjustments to the height and leveling of the unit. Proper leveling ensures the dryer operates smoothly and efficiently, reducing vibrations and preventing unwanted movement during cycles.

Causes of a bad leveling foot can include wear and tear from regular use, damage from moving the dryer, or breakage due to heavy loads and stress. Over time, the threads on the leveling foot can wear out, or the foot itself can become cracked or deformed.

Symptoms of a bad leveling foot include:

Dryer rocking or wobbling during operation
Unusual noises or vibrations
Difficulty in adjusting the dryer's height
Visible damage or wear on the leveling foot

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Took the base off the washer and dryer and they had no feet on them. Paula S. • Onalaska , WA • March 22, 2014

Bought the leveling feet and screwed them in the bottom and they work great. Read more

$7.95

Compare At:: $9.54
You Save:: $1.59

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Water Inlet Valve

4.9 (89)

By: Whirlpool

Part Number: WP8540751

The Water Inlet Valve is an OEM part for Whirlpool washing machines. It controls the flow of water into the washer during the fill cycles, ensuring that the correct amount of water enters the tub for washing and rinsing. This valve is crucial for the proper functioning of the washing machine, as it regulates the water temperature and flow.

Causes of a bad water inlet valve can include mineral deposits from hard water, wear and tear over time, or electrical malfunctions. These issues can cause the valve to either not open or close properly, leading to water flow problems.

Symptoms of a bad Water Inlet Valve include:

The washer not filling with water
Slow fill cycles
Water leaking from the valve
Incorrect water temperature during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Will not fill with water
Will not stop filling with water

Do-It-Yourself Stories from Customers like You Whirlpool duet showing an f20 code Cheryl T. • Chino Hills , CA • January 28, 2017

The F20 code was low/no water pressure code. I watched a YouTube video and purchased a Water Inlet Valve from Appliance Pros. After my son installed the new part my washer still didn't work. I looked on Google for trouble shooting and the 1st thing it said was turn on both hot/cold water as the washer needs the pressure of the hot/cold water. I had turned off the hot valve because it was leaking. I assumed I could still do cold water loads. Read more

$50.31

Compare At:: $67.68
You Save:: $17.37

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Rear Drum Felt Seal With Adhesive

4.9 (29)

By: Whirlpool

Part Number: 239087

The Rear Dryer Drum Felt Seal with Adhesive is an OEM part for Whirlpool dryers. It forms a protective barrier along the rear opening of the dryer drum, preventing air leaks and absorbing sound-dampening vibrations.

Causes of a bad rear drum felt seal can include degradation of adhesives from heat cycling or poor drum surface bonding from bending stresses over time.

Symptoms of a bad rear dryer drum felt seal include:

Reduced drying effectiveness and longer cycle times from air leaks
Excessive noise emanating from around the rear drum seal area
Flapping or loose seals allow air pathways to form
Deterioration of the felt allowing lint and dust collection behind

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Marks left on clothes

Do-It-Yourself Stories from Customers like You Noisy & inefficient Richard M. • Indianapolis , IN • December 06, 2016

After having replaced the drum support rollers twice in a roughly 3yr period, I realized something wasn't quite right, and indeed it wasn't. I had been ordering the wrong parts - I did use the online parts locator after checking, & double checking my model number. Apparently my older Whirlpool dryer has a somewhat ambiguous model number because the rollers that were shipped each time looked nothing like the originals. I realize that is not particularily uncommon - manufacturers often modify... Read more

$41.95

Compare At:: $58.24
You Save:: $16.29

IN STOCK

Ships Monday Guaranteed

Add to Cart

Do you need help?

Get Questions Answered Instantly.

1-877-477-7278 Online

Live Help

Best Seller

Genuine Whirlpool part

Lp Conversion Kit

4.9 (61)

By: Whirlpool

Part Number: 49572A

The LP Conversion Kit is an OEM component for Whirlpool and KitchenAid gas dryers. It allows conversion from natural gas to liquid propane fuel operation. Over time in gas-powered dryers, improper gas/air mixture causes part wear like weakened burner components. This is risky if overlooked but converting to an alternative fuel safely remedies.

Causes relate to unavoidable deterioration from gas combustion stresses. Conversion using this kit prevents hazardous gas leaks or explosions.

Symptoms involve:

Diminished or unsafe heat levels from burners
Gas leaks which exacerbate safety risks over time

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Needed to convert gas dryer to propane Ken B. • Foresthill , CA • June 12, 2014

Ordered the parts from ApplianceParts Pros.com and saved the $100 service call. The fix was easy, complete instructions enclosed. Read more

$32.43

Compare At:: $38.59
You Save:: $6.16

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Thrust Washer

4.7 (38)

By: Whirlpool

Part Number: WP233520

The Thrust Washer is an OEM part for Whirlpool washers and dryers, reduces friction between moving parts within the appliance. This small component is placed between rotating surfaces to ensure smooth operation and to extend the lifespan of those parts. The thrust washer can wear down or become damaged due to the constant pressure and movement.

Causes for replacement may include normal wear and tear, overloading the appliance, which puts extra stress on mechanical components, or a lack of regular maintenance.

Symptoms of a bad Thrust Washer include:

Increased noise during operation
The appliance vibrating more than usual
A decrease in performance efficiency

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Will not agitate
Pumps but will not spin
Will not tumble
Noisy

Do-It-Yourself Stories from Customers like You The issue was a 10+year old Maytag washer wouldn't spin nor would the agitator move but the motor would run. Wessley R. • Trinity , AL • July 28, 2020

Upon removal of the lower inspection panel on the front of the machine, my 20 year old son thought the motor was bad by the smell. But he did discover what turned out to be the belt tensioner pulley laying inside the machine. After he pronounced it dead, without a thought to the idler pulley, I looked at the machine and determined the lack of movement was due to the idler pulley having "fallen" off the shaft by looking at the illustrated parts break down provided on this website. Ordered the... Read more

$7.95

Compare At:: $9.46
You Save:: $1.51

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Inner Bellow Clamp

4.7 (25)

By: Whirlpool

Part Number: WP8540108

The Inner Bellow Clamp is an OEM part for Whirlpool washing machines. It secures the inner bellow, or door boot seal, in place, ensuring a tight fit and preventing leaks from the washer drum during operation. The clamp has a diameter of approximately 18 inches.

Over time, the inner bellow clamp can wear out or become damaged due to repeated exposure to water, detergent, and the constant movement of the washing machine drum. If the clamp loses its tension or breaks, it may result in leaks and improper sealing of the door boot.

Symptoms of a bad inner bellow clamp include:

Water leaks from the door area
The door boot seal appears loose or out of place
Visible damage or rust on the clamp

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Water leak on floor Dawn P. • Byron , NY • April 18, 2017

Watched a youtube video and it was easy to do. Read more

$22.95

Compare At:: $27.31
You Save:: $4.36

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Appliance Spray Paint

4.9 (35)

By: Whirlpool

Part Number: 350930

Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.

The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.

The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.

Symptoms needing for Appliance Spray Paint include:

Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
A desire to refresh or update the appearance of the appliance without the need for complete replacement
Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015

Replaced It With New One Read more

$24.95

Compare At:: $29.94
You Save:: $4.99

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Clamp

4.8 (26)

By: Whirlpool

Part Number: W11032829

The Washer Clamp is an OEM component specifically designed for Whirlpool washing machines. It secures important internal components, such as hoses, to the washer tub during operation. Precise alignment and sufficient tightness are essential for leak-free function.

Causes of a bad clamp can include cracks, breaks or missing segments from extended use under pressure. Mineral buildup or corrosion over time may also weaken the clamp material.

Symptoms of a bad clamp include:

Vibrations or noises from loose or incorrectly positioned components
Water leaks inside the washer from disconnected or poorly sealed hoses
Reduced efficiency and improper filling or draining issues

This genuine OEM replacement, part is also compatible with other major brands like Maytag, KitchenAid and the brands of Sears Kenmore.

Do-It-Yourself Stories from Customers like You Front load washer leaking from door Robert S. • Agoura , CA • December 30, 2014

Followed your video instructions. It was invaluable. The toughest part was getting the seal on the back of the drum. Your technician made it look very easy. Once that was on, the rest was pretty easy. The control panel on my Whirlpool Duet washer had a holding screw at the bottom center of it. It wasn't shown in the video, but it was easy to figure out. If you are changing the boot, change the clamp as well. Read more

$19.95

Compare At:: $23.54
You Save:: $3.59

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.9 (14)

By: Whirlpool

Part Number: WP3387230

The Whirlpool screw is an OEM replacement part responsible for securely fastening various components and parts within Whirlpool appliances. These screws are essential for maintaining the structural integrity and safe operation of the appliance. These screws hold together critical components like panels, brackets, handles, and internal parts.

This part fixes the following symptoms:

Loose or wobbly handles on refrigerators, ovens, or other appliances
Vibrations or rattling noises during appliance operation
Inability to assemble or disassemble parts during appliance repair or maintenance

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You The lint catch was broken Misti P. • Spokane , WA • January 18, 2019

This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more

$8.36

Compare At:: $9.95
You Save:: $1.59

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Appliance Touchup Paint

4.9 (33)

By: Whirlpool

Part Number: 72017

The Appliance Touchup Paint is an OEM product for Whirlpool appliances. This touchup paint is used to cover scratches, chips, and minor blemishes on the surface of various appliances, helping to maintain their appearance and protect them from rust and other damage. It is specifically formulated to match the original color and finish of Whirlpool appliances, ensuring a seamless repair.

Causes of needing touchup paint include everyday wear and tear, accidental impacts that cause chipping or scratching, and exposure to harsh cleaning chemicals that can damage the finish. Regular use of touchup paint can help keep appliances looking new and extend their lifespan.

Symptoms indicating the need for Appliance Touchup Paint include:

Visible scratches or chips on the appliance surface
Areas of exposed metal prone to rust
Blemishes that affect the overall aesthetic of the appliance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Chipped paint Thomas S. • Middletown , DE • September 03, 2014

Touch up paint Read more

$12.55

Compare At:: $15.06
You Save:: $2.51

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Front Leveling Foot

4.9 (19)

By: Whirlpool

Part Number: WPW10001130

The Front Leveling Foot is an OEM part for Whirlpool washing machines. It is designed to support and stabilize the washer by allowing users to adjust the height and level the appliance on uneven floors. Proper leveling ensures smooth operation and minimizes vibrations and noise during wash cycles.

Causes of a bad Front Leveling Foot can include physical damage from excessive force, wear and tear from frequent adjustments, or corrosion due to exposure to water or laundry chemicals. Over time, these factors can compromise the foot’s ability to maintain stability, leading to operational issues.

Symptoms of a bad Front Leveling Foot include:

The washing machine rocking or wobbling during operation
Increased vibration and noise
The washer being unlevel, affecting wash performance
Difficulty in adjusting the foot

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Shakes and moves

Do-It-Yourself Stories from Customers like You It would act like its out of balance on the spin cycle even with no water or clothes in it no one had the answer even local repair people untill i found a youtube on out balance on spin cycle Carl W. • Glendale , AZ • June 27, 2015

REPLACING THE SUSPENSION PADS AND REPLACE THE BALNCE RING EVEN IF MY DIDN'T LEAK ANY FLUID OUT OF IT... IT SOLVE THE PROBLEM, IT WORKS BETTER NOW THAN IT EVER DID, THE ONLY THING I COULD COME WITH IS THE MANUFACTURE PUT THE WRONG BALANCE RING IN IT TO START WITH... MY IS A 400 KENMORE TOP LOADER, IT IS THE EASIES WASHER I HAVE EVER TAKEN A PART.. I WISH CARS WERE THAT EASY... IT TOOK ME OVER A MONTH FIGHTEN THIS PROBLEM UNTIL I FOUND IT ON YOUTUBE... WHAT BLESSING IT WAS... Read more

$6.95

Compare At:: $8.20
You Save:: $1.25

IN STOCK

Ships Monday Guaranteed

Add to Cart

Shop With Confidence

Over 15 million customers served!

365-Day Returns

Hassle-free Returns

Fast Delivery

1.7 Days on Average!

Free Tech Support

On all purchased parts!

Best Seller

Genuine Whirlpool part

Outlet Housing Seal

4.9 (16)

By: Whirlpool

Part Number: WP697813

The Dryer Outlet Housing Seal is an OEM part for Whirlpool dryers. This seal ensures that the hot air and moisture are properly vented out of the dryer during the drying cycle, maintaining efficiency and preventing leaks. It fits around the outlet housing to create a tight seal, keeping the internal components protected and ensuring optimal drying performance. The seal measures approximately 15 inches.

You should replace the outlet housing seal if it becomes damaged or worn out. Causes of a bad seal can include wear and tear over time, heat damage, or physical deterioration from repeated use.

Symptoms of a bad outlet housing seal include:

Air leaks around the dryer outlet
Reduced drying efficiency
Excessive lint buildup around the dryer vent
Unusual noises during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Over heating. Robert B. • Hollywood , SC • October 14, 2017

Watched You tube videos to narrow the problem down to old deteriorated gaskets. Read more

$10.43

Compare At:: $12.52
You Save:: $2.09

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Hose Clamp

5.0 (24)

By: Whirlpool

Part Number: WP596669

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

Leaks at the hose connection points
Hoses slipping off the connections
Visible rust or damage on the clamp
Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Will not stop filling with water
Leaking

Do-It-Yourself Stories from Customers like You My washing machine smelt horrible Bryan W. • Ogdensburg , NY • August 20, 2018

First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available.... Read more

$7.95

Compare At:: $9.54
You Save:: $1.59

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Rear Drum Felt Seal With Adhesive

4.9 (47)

By: Whirlpool

Part Number: 279408

The Rear Drum Felt Seal with Adhesive is an OEM part for Whirlpool dryers. This part creates a tight seal at the rear of the dryer drum. This seal prevents hot air from escaping the drum during cycles, ensuring efficient and even drying of clothes.

Causes of a deteriorating rear drum felt seal can range from normal wear and tear, excessive heat exposure, to mechanical issues that cause misalignment or excessive wear on the seal itself.

Symptoms of a bad Rear Drum Felt Seal include:

Clothes taking longer to dry or not drying thoroughly
Increased lint outside the dryer or in the venting system
Unusual noises during operation, indicating a gap or friction issue
Heat escaping from the rear of the dryer

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms

Marks left on clothes

Do-It-Yourself Stories from Customers like You Noisy 35 year old Sears Kenmore electric clothes dryer. Christopher L. • Whitefish Bay , WI • April 21, 2020

1) I spent a half-day researching online for possible causes for squeaks. Discovered the AppliancePartsPros YouTube videos, which were the best I found for clarity and ease of understanding. 2) I went from the videos to the website to locate each model-specific part that might have been causing the noise. Once I identified the parts for my model of dryer, I called customer service to confirm that I had the right ones before placing my order. I spoke with Sharon, who was very helpful and... Read more

$45.95

Compare At:: $54.68
You Save:: $8.73

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screen

5.0 (16)

By: Whirlpool

Part Number: W10874409

The Dryer Screen is an OEM replacement part specific to Whirlpool dryers. Located inside the dryer cabinet behind the drum, the screen serves as a barrier protecting the blower system and ducting from lint and debris. The screen measures approximately 21"L and 7" W

Causes of a bad Dryer Screen can include physical damage from improper handling, accumulation of lint that isn't fully removed during cleaning, or wear and tear over time. A compromised lint screen can allow debris to bypass it, potentially leading to clogs and reduced drying efficiency.

Symptoms of a bad Dryer Screen include:

Lint buildup on clothes after drying
Longer drying times
The dryer overheating
Visible tears or holes in the screen mesh

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Worn out, damaged lint filter Lynn C. • Raleigh , NC • June 04, 2019

Ordered replacement lint screen. When it arrived, I took out the old one and put the new one in the dryer. I am extremely happy with the new lint screen. I tried to find one on Sears website but it was unavailable; it was wonderful to find your website and to find what I needed. The customer service representative was so helpful and pleasant! Whenever I need a replacement part for my 30+ year old washer or dryer, I will order it from you. Read more

$52.30

Compare At:: $62.24
You Save:: $9.94

IN STOCK

Ships Monday Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Kenmore He2 Parts

Washer Door Strike

Leveling Foot

Water Inlet Valve

Rear Drum Felt Seal With Adhesive

Lp Conversion Kit

Thrust Washer

Inner Bellow Clamp

Appliance Spray Paint

Clamp

Screw

Appliance Touchup Paint

Front Leveling Foot

Outlet Housing Seal

Hose Clamp

Rear Drum Felt Seal With Adhesive

Screen