Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

Kids01ijbs0 Parts

Best Seller
Dishwasher Cleaner Tablets, 6 Count
Genuine Whirlpool part
By: Whirlpool
Part Number: W10549851

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Do-It-Yourself Stories from Customers like You Color change went from black to stainless steel   Wayne J. • Harleysville , PA • January 12, 2019

Very smooth. I ordered the door and the control panel. It is helpful to have an extra set of hands when removing the screws from the door or place something under it so it doesn’t drop. The door comes off with about 10 screws. They are different length. Short screws go into steel, long go into plastic. Remove the door and upper facia/control panel. You’ll need to disconnect the wires. The panel has two parts that need to be transferred. 1. The electronic panel. It’s white and has a row of... Read more

More
$9.95
Compare At:
$11.94
You Save:
$1.99

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dishwasher Door Balance Link Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 8194001

Door balance link kit for dishwashers. Connects door springs to control door movement. Replace if rope is frayed, broken, or plastic clips are cracked or worn.

This part fixes the following symptoms
  • Noisy
  • Door won't close
  • Door latch failure
See more...
Do-It-Yourself Stories from Customers like You The door would free fall to the floor left door balance broken   Daniel M. • San Diego , CA • December 23, 2016

I finally decided to repair my dishwasher because the door would free fall to the floor possibly breaking the hinges. Also the top shelf was rolling out on its own every time the door was opened. I first pulled the dishwasher out of the enclosure and found that the drain hose was directly under the pump area throwing the unit completely out of level. Also the inadequate plastic and rope counterbalance on the left side was completely broken where the rope was attached to the plastic piece to the... Read more

More
$29.48
Compare At:
$35.38
You Save:
$5.90

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Thermal Fuse
Genuine Whirlpool part
By: Whirlpool
Part Number: 675813

The Thermal Fuse is an OEM part for Whirlpool dishwashers. It serves as a crucial safety component that prevents the appliance from overheating by cutting off electrical power if the temperature inside the dishwasher becomes too high. This helps protect both the dishwasher and your home from potential fire hazards.

Causes of a bad thermal fuse can include overheating due to blocked air vents, malfunctioning components that lead to excessive heat, or electrical surges that damage the fuse. Over time, regular wear and tear can also contribute to the fuse's failure.

Symptoms of a bad thermal fuse include:

  • The dishwasher not starting or running
  • The control panel not responding
  • The dishwasher stopping unexpectedly mid-cycle
  • No indicator lights or sounds when attempting to operate the dishwasher

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Dishwasher just stopped working, no power   Michelle W. • Gillett , WI • April 05, 2014

My friend researched online what would make a dishwasher just stop working, no power. The person on the you tube video showed how to first start with the thermal fuse. Then searched online for the thermal fuse. You had the part for a small price. I felt it was worth trying to see if that may be the issue. IT WORKED!! I was without a dishwasher for over a year, was planning to by a brand new one but for $23.00 now have a working dishwasher!! YEAH! Read more

More
$51.62
Compare At:
$61.94
You Save:
$10.32

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Hose Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP596669

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

  • Leaks at the hose connection points
  • Hoses slipping off the connections
  • Visible rust or damage on the clamp
  • Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Will not stop filling with water
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You My washing machine smelt horrible   Bryan W. • Ogdensburg , NY • August 20, 2018

First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available.... Read more

More
$7.48
Compare At:
$8.98
You Save:
$1.50

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Hose Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285655

The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.

Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

  • Water leaks around the hose connection points
  • The hose slipping off the fitting
  • Visible rust or wear on the clamp
  • Difficulty in tightening the clamp to secure the hose

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Syphonbreak was leaking   James O. • Bryant , AL • September 04, 2015

We ordered parts from appliance parts pros and I fixed it. Read more

More
$9.63
Compare At:
$11.46
You Save:
$1.83

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Lid Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10119828

 

The Washer Lid Screw is an OEM part for Whirlpool washing machines. This 6-32 x .340 screw secures the washer lid to the hinge assembly, ensuring the lid opens and closes smoothly and stays securely in place during operation.

Causes of a bad washer lid screw can include wear and tear from frequent use, corrosion due to exposure to moisture, or damage from over-tightening or mishandling. A compromised screw can lead to issues with the lid's stability and functionality.

Symptoms of a bad washer lid screw include:

  • The washer lid feeling loose or wobbling
  • Difficulty in opening or closing the lid
  • Visible rust or corrosion on the screw
  • The lid not staying securely in place

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Whirlpool cabrio washer cracked lid (model wtw7800xw2)   Mike M. • West Hartford , CT • November 29, 2016

I just replaced the glass lid and broken plastic frame with the all metal one. Call 877 477 7278 for appliancepartspros and order the following Whirlpool parts (prices as of November 2016): 1 lid part number WP8572026 (AP6013408) for $119.81 2 hinges WP8563964 (AP6004844) for $6.17 each 4 screws WPW10119828 (AP6015313) for $1.97 each Total $140.03 plus $8.95 shipping, grand total $148.98 Note that it does not say that this lid will fit model 7800, but the lid will fit this model. The... Read more

More
$7.94
Compare At:
$8.73
You Save:
$0.79

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Hex Nut
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33001443

This Hex Nut is a small but critical fastener used to secure brackets, panels, and internal assemblies in your appliance. Replacing a stripped, corroded, or missing nut restores a tight, rattle-free, and safe installation.

  • Threads onto a matching bolt or stud to clamp parts together
  • Helps maintain alignment and reduce vibration-related loosening
  • Commonly used on panels, brackets, supports, and internal assemblies
  • Replace when threads are damaged, hex flats are rounded, or hardware is missing
  • Symptoms can include loose or rattling components or hardware that won't stay tight
What's included: One hex nut. Install notes:
  • Disconnect power and, if applicable, shut off gas or water before servicing
  • Use the correct-size nut driver or wrench to avoid rounding the hex
  • Start the nut by hand to prevent cross-threading; tighten snugly without over-torquing
  • Inspect and replace any damaged mating bolt/stud or washer for a secure repair

Do-It-Yourself Stories from Customers like You The rollers needed to be replaced, the axles for the rollers needed to be replaced, the tension pulley roller needed to be replaced, the belt needed to be replaced   Richard G. • El Paso , TX • December 18, 2018

It took me about 2 hours to take everything apart and get it back together & running again with no problems. All the parts I ordered were exactly what I needed to fix everything. Thank you all !!! Read more

More
$5.95
Compare At:
$7.14
You Save:
$1.19

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9741232

Quantity of ONE. Size: 8-18 x 5/8 inch. (#8 screw, 18 threads per inch, 5/8 inch long)

Do-It-Yourself Stories from Customers like You Leaking around dishwasher door previous repair missing parts   Patrick R. • Peachtree City , GA • November 15, 2014

I ordered new seals from AppliancePartsPros.com. Finding the right seals was very easy, all based on model number of the appliance. While looking my unit over for other signs of wear, I noticed that a repair done by the prior homeowner to the lower wash arm was done improperly: a seal there was set protruding from the cover, the cover was missing screws, and the arm was missing the upper bushing. So I ordered a new seal, the missing screws, and both the top and bottom bushings (just to be... Read more

More
$7.56
Compare At:
$8.90
You Save:
$1.34

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Appliance Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10348409

Fixes loose panels, rattling doors, or wobbly components caused by stripped or missing screws. Secures brackets, covers, and mounting hardware. Easy DIY.

Do-It-Yourself Stories from Customers like You Dishwasher would not start   Mark M. • Midlothian , VA • July 16, 2016

Maytag Dishwasher (about 5 years old). Some of the buttons had stopped functioning. Then the Start button began choosing whether or not to work. Eventually it would not start at all. Upon removing the control panel, the first thing I noticed was that the brackets that hold the two lower screws were broken. (So this was the reason that the door was so hard to open from the time it was new.) I trouble shot the thermal fuse, the door-latch switches, and inspected the control board trying to find... Read more

More
$7.56
Compare At:
$8.98
You Save:
$1.42

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Power Cord Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 4317824

The Power Cord Kit is an OEM replacement part for Whirlpool dishwashers. It is a 3-prong grounded, 16-gauge cord that includes all the hardware needed for installation. Includes all hardware needed for installation.

Causes of a bad power cord can include normal wear and tear over years of use, accidental impacts or cuts to the wiring, or improper installation that damages components.

Symptoms of a bad power cord include:

  • The dishwasher not turning on or completing cycles
  • Warm or hot power cords during operation
  • Frayed, cracked, or exposed copper wiring

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Mice chewed the drain hose and power cord   Noah C. • Eastsound , WA • February 16, 2015

Read directions on how to change the power cord and watched video on your site on how to change the drain hose. Everything went perfectly. Read more

More
$22.53
Compare At:
$26.81
You Save:
$4.28

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W11631670

This factory-specified screw secures panels, brackets, and internal components in your appliance. Replacing worn or missing hardware restores a tight fit to help reduce vibration, noise, and premature wear.

  • Fastens sheet metal, brackets, or plastic parts as designed by the manufacturer
  • Helps maintain alignment and reduce vibration/rattling
  • Direct replacement for stripped, corroded, or missing screws
  • Common signs: loose panels or trim, shifting components, screw won't tighten
What's included: One screw Install notes:
  • Disconnect power; shut off water or gas supply if applicable
  • Use the correct driver to avoid stripping the head
  • Start threads by hand to prevent cross-threading; tighten snugly without overtightening
  • Replace one-for-one in the original location per service information

Do-It-Yourself Stories from Customers like You Some accessories were worn.   Wayne C. • Massapeqau Park , NY • April 15, 2020

My son fixed the issue of some wear and tear. Read more

More
$12.13
Compare At:
$13.34
You Save:
$1.21

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489069

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

Do-It-Yourself Stories from Customers like You Broken handle foot pedal and missing parts   Donald M. • Lake Arrowhead , CA • April 05, 2015

This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy! Read more

More
$7.56
Compare At:
$8.32
You Save:
$0.76

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Hex Nut
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488130

This is a genuine lock nut replacement. This is a general piece of hardware that is often used on several types of lawn and garden equipment, including in engines, housing, and other areas. The exact application of this part will vary based on the unit. The lock nut is used to create a more secure seal than a standard nut. When properly secured, the lock nut tightens to a bolt and uses an extra locking washer with teeth to ensure a snug fit.If lock washers do get damaged or lost, they need to be replaced immediately with a genuine OEM replacement. This model is compatible with all types of machines and units since it is a generic part. The washer is sold as an individual part and manufactured by Whirlpool. Lock nuts will need to be installed using a socket wrench or adjustable wrench. Pliers, a screwdriver, or another socket wrench will be needed to hold the bolt while the lock nut is being secured in place. Be sure to thread the lock nut carefully to ensure a strong seal and avoid stripping the bolt or the nut.

Do-It-Yourself Stories from Customers like You Oven drawer roller hardware was missing   Virginia R. • Woodinville , WA • April 11, 2017

Ordered the roller and nut, reattached the nylon wheel that I found in the floor under the oven.This was the only website where I could find all of the parts detailed and so I knew exactly what to buy. Even the manufacturer's website didn't have this info. Read more

More
$4.95
Compare At:
$5.89
You Save:
$0.94

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Nut
Genuine Whirlpool part

Nut

By: Whirlpool
Part Number: WP3400029

Size: 10-32

Do-It-Yourself Stories from Customers like You The heating elements were not working, but there was power on the control panel.   Miroslav R. • Petaluma , CA • May 08, 2020

Check the power cord connection to the stove and found burned cable due to loose connection. Replaced the terminal and the nuts and installed a new power cord. Read more

More
$5.95
Compare At:
$7.14
You Save:
$1.19

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dishwasher Pronged Cup Washer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3378128

Pronged cup washer for securing internal dishwasher components. Provides reliable retaining force for assembly hardware.

More
$5.95
Compare At:
$7.08
You Save:
$1.13

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400014

Size: 8-32 x 1/2 inch.

More
$7.56
Compare At:
$8.32
You Save:
$0.76

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store
​