Kitchenaid Kudp02crbs2 Parts

The Filter Assembly is an OEM part for Whirlpool dishwashers. This component is responsible for trapping food particles and debris, preventing them from recirculating during the wash cycle and ensuring that dishes come out clean. 

Causes of a bad filter assembly can include accumulated debris, regular wear from repeated use, or damage from harsh cleaning agents. A compromised filter can reduce the dishwasher’s cleaning performance and lead to buildup inside the machine.

Symptoms of a bad filter assembly include:

• Dishes not being cleaned properly
• Unusual noises during the wash cycle
• Slow drainage or standing water in the dishwasher
• Visible damage or clogging of the filter

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Air Vent Gasket is an OEM part for Whirlpool dishwashers. It is designed to seal the air vent, preventing water from leaking out during the dishwasher's operation. This gasket plays a critical role in maintaining the efficiency and effectiveness of your dishwasher by ensuring a watertight seal around the air vent, which is essential for the proper function of the venting system.

Causes of a bad Air Vent Gasket can include wear and tear over time, leading to cracks or deterioration, improper installation, which may result in a poor seal, or damage from harsh cleaning chemicals.

Symptoms of a bad Air Vent Gasket include:

• Water leaking from around the dishwasher's door.
• Dishes not drying properly due to compromised venting.
• Visible signs of wear or damage on the gasket itself.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement panel restores your appliance's original look while shielding internal components. Install a new panel to replace a dented, cracked, or missing piece and keep the assembly secure, aligned, and protected.

• Covers and protects internal parts while restoring the exterior finish and fit
• Provides the designed mounting surface for trim/handles; helps maintain alignment
• Replace when the panel is dented, cracked, warped, rusted, or mounting tabs are broken
• Helps resolve loose or rattling panels and visible gaps or misalignment

• Disconnect power; turn off water or gas supply if applicable
• Wear gloves and protect finished surfaces; handle carefully to avoid bending or scratching
• Transfer and reuse original screws, clips, insulation, and trim as directed by your service manual
• Fit and alignment before fully tightening fasteners

The Lower Spray Arm is an OEM part for Whirlpool dishwashers. This component is located at the bottom of the dishwasher and is responsible for distributing water to clean the dishes during the wash cycle.

Causes of a bad lower spray arm can include clogging due to food particles or debris, wear and tear from regular use, or damage from accidentally loading items improperly. Such issues can obstruct water flow or prevent the spray arm from rotating effectively, leading to suboptimal cleaning performance.

Symptoms of a bad lower spray arm include:

• Dishes not being cleaned properly
• Inconsistent water spray patterns
• Noisy operation during the wash cycle
• The spray arm not rotating or moving smoothly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Latch is an OEM replacement part for Whirlpool dishwashers. It secures the dishwasher door securely closed during the wash cycle. The latch mechanism works with the door handle to provide a sturdy closure and maintains proper sealing to prevent leaks.  

Causes of a bad latch door can include normal wear and tear from repeated opening and closing of the dishwasher door over time. Components like springs or latches may lose tension.

Symptoms of a bad latch-door include:

• The door not closing or latching properly
• Difficulty opening or closing the door 
• Gaps appearing around the door seal when closed
• The possibility of the door unintentionally opening during a cycle 

This OEM Whirlpool replacement part is also compatible with KitchenAid, Jenn-Air, Amana, Roper, and some Kenmore models.

The Dispenser is an OEM part for Whirlpool dishwashers, integral to the appliance's operation by dispensing detergent and rinse aid during the wash cycle. This component ensures that the right amount of cleaning agent is released at the correct time, contributing significantly to the effectiveness of each wash.

Causes of dispenser failure include cracked internal components from repeated door openings, mineral buildup clogging dispenser parts, or electrical malfunctions preventing dispensing functions. 

Symptoms of a malfunctioning dispenser include:

• Detergent not being released during the cycle
• Rinse aid leakage or inconsistent dispensing
• The dispenser door sticking or failing to open

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Float Switch Kit is an OEM part for Whirlpool dishwashers. It includes the float and the switch mechanism that monitors and controls the water level inside the dishwasher. The float switch ensures that the dishwasher does not overfill by signaling the water inlet valve to shut off the water supply once the appropriate level is reached.

Causes of a bad float switch can include debris or mineral buildup, wear and tear over time, or electrical failures within the switch mechanism. A malfunctioning float switch can lead to water overfilling, which may cause leaks and inefficient washing performance.

Symptoms of a bad float switch kit include:

• Dishwasher overfilling with water
• Water leaks during operation
• Dishwasher not filling with enough water
• Error codes related to water levels

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Feed Tube is an OEM replacment part for Whirlpool built-in dishwashers. Extending from the bottom of the lower spray arm manifold to the upper spray arm, this tube routes rinse water during cycles.

Causes relate to mineral accumulation stiffening the interior over time, punctures from sharp utensil edges, or cracks allowing leaks

Symptoms of a defective feed tube involve:

• Poor or absent spray coverage of utensils and containers
• Clogs or sediment buildup obstructing uniform distribution
• Ineffective cleaning even on light soil loads

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The Lower Spray Arm Support is an OEM replacement part for Whirlpool built-in dishwashers. Attached underneath the wash arms enclosure, this bracket securely anchors the rotating lower spray arm inside the lower dishrack.

Causes of failure involve cracking or stripping of securing clips allowing excessive movement during high-pressure spray cycles. Mineral buildup over time can also obstruct smooth operation.

Symptoms consist of:

• Detached lower spray arm failing to thoroughly rinse lower rack dishes
• Abnormal noises and vibrations from mobility during operation
• Ineffective cleaning even on light soil levels
• The lower spray arm not rotating or spinning freely during wash cycles

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

To order seal use WP8268340.

The Tub Inlet Gasket is an OEM part for Whirlpool dishwashers. It ensures a watertight seal at the point where water enters the tub, preventing leaks and maintaining efficient water flow during the wash cycle.

Causes of a bad tub inlet gasket include wear and tear from regular use, damage from harsh cleaning chemicals, or drying out and cracking due to age.  

Symptoms of a bad tub inlet gasket include:

• Water leaking from the front or bottom of the dishwasher
• Poor cleaning results due to insufficient water pressure
• Visible cracks or wear on the gasket
• Unusual noises from the dishwasher during the filling cycle

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Water Manifold Probe is an OEM replacement part for Whirlpool dishwashers. This probe monitors water levels during dishwasher cycles by sensing when the water valve opens and closes during different stages of cleaning and rinsing. It plays an integral role in ensuring the precise delivery of water at optimal temperatures and pressures. 

Symptoms of a bad water manifold probe include:

• Inability to sense proper water levels 
• Fault codes or error messages related to water levels
• Improper or failed dispenser of detergent
• Incomplete or inadequate wash and/or rinse cycles

Over time, probes can corrode, crack, or malfunction due to repetitive heating and cooling cycles. 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Upper Dishrack Wheel is an OEM part for Whirlpool dishwashers. It is designed to allow the upper dishrack to slide in and out smoothly during loading and unloading. This wheel attaches to the dishrack and runs along the tracks inside the dishwasher, ensuring stable and easy movement.

You should replace the upper dishrack wheel if it becomes worn out or damaged. Causes of a bad dishrack wheel can include regular wear and tear from frequent use, damage from overloading the rack, or breaking due to impacts. These issues can hinder the dishrack’s movement, making it difficult to access the upper rack.

Symptoms of a bad upper dishrack wheel include:

• The upper dishrack not sliding smoothly or becoming stuck
• Uneven or lopsided dishrack positioning
• Noise or grinding sounds when moving the dishrack
• The wheel appearing cracked, broken, or missing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This cover screw secures appliance panels and covers, keeping components protected and aligned. Replace missing, stripped, or corroded screws to restore a tight fit and help eliminate rattles, gaps, or panels that won't stay in place.

• Attaches an access cover or panel to the appliance frame
• Helps maintain proper alignment to protect internal components
• Replaces missing, stripped, or rusted hardware
• Typical signs: loose or rattling panel, cover won't stay secure, damaged or rounded screw head

• Disconnect power before servicing
• Support the panel while removing and installing screws to prevent misalignment
• Start threads by hand to avoid cross-threading; do not overtighten
• Use a matching driver bit to avoid damaging the screw head

The Door Hinge Assembly is an OEM part for Whirlpool dishwashers. This hinge assembly is responsible for attaching the dishwasher door to the main body, allowing it to open and close smoothly while maintaining a proper seal when shut. 

Causes of a bad door hinge assembly can include regular wear and tear, damage from excessive force or accidental impacts, and corrosion from exposure to moisture and detergents.  

Symptoms of a bad door hinge assembly include:

• The dishwasher door not closing properly or staying open
• Difficulty opening or closing the dishwasher door
• A misaligned dishwasher door
• Unusual noises or resistance when moving the door

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Strike is an OEM part for Whirlpool dishwashers. This part ensures the dishwasher door latches securely, allowing the dishwasher to operate properly. The strike works in conjunction with the door latch to keep the door closed during the washing cycle.

Causes of a bad strike can include regular wear and tear, physical damage from forceful closing, or misalignment over time. The strike may bend or wear down, preventing the door from latching properly.

Symptoms of a bad strike include:

• Dishwasher door not staying closed
• Dishwasher not starting or stopping mid-cycle
• Loose or misaligned door
• Difficulty in closing the dishwasher door securely

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.

Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.

Symptoms of a bad spring tension hose clamp include:

• Water leaks around hose connections
• Loose or disconnected hoses
• Unusual noises or vibrations during operation
• Water pressure issues within the washing machine

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.