Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement hinge pin for stand mixer tilt heads. Secures the pivoting head assembly. Install if your original pin is missing, sliding out, or worn.
Well after spending more then 30 minutes, and with the assistance of a great Consumer Support Tech, Mr. Curtis(first name), we finally figured out how to ajust a "simple" adjustment bolt in my Kitchen Aid miser. I would like to give Mr. Curtis my thanks for assisting and been so patience with this "Mr Know" everything Puertorrican. Read more
Replace your stand mixer's power cord if it's damaged, frayed, melted, or chewed. This electrical cord connects your mixer to the outlet for power.
I replaced the Board-Phas and speed control plate since power was not making it to the motor. When I received the speed control plate it had nuts on the upper screws with springs, since my old one didn't have nuts I assumed that the nuts were to keep the springs on until installed. After putting it back together, I noticed that though it worked, the first two settings did nothing. Now, guys, I was desperate, OK. I downloaded the service manual and read it from front to back, and when I got to... Read more
Replace a worn, bent, or broken agitator shaft in your stand mixer. This shaft connects attachments to the planetary mechanism for proper operation.
REPLACED WORM GEAR AND OTHER GEARS SHOWING WEAR Read more
Spacer washer maintains proper spacing between mixer gearcase components. Replace if cracked, worn, or missing to restore correct alignment and operation.
Replacement power cord for stand mixers. Connects your mixer to the wall outlet. Replace if frayed, heat-damaged, cracked, or loose for safe operation.
Took it apart after watching a YouTube video and fixed it with no issues. Works as good as new now Read more
If your stand mixer components are loose or misaligned, this grooved retaining pin secures parts together for smooth, quiet operation. Easy fix.
Fix grinding noises and stripped gears in your stand mixer. This pinion drive gear transfers motor power through the gear train for smooth mixing.
Replaced all parts in the transmission. Read more
This phase control board is the power module that drives designated surface elements on compatible cooktops. It regulates power and communicates with the main control to deliver steady heat, restoring proper heating performance when the original module fa
Machine screw with 10-24 thread fastens motor housing, gearcase, and internal brackets in stand mixers. Replace stripped or missing screws to restore secure assembly and reduce vibration.
Watched a you tube video that covered every detail. Identified the problem, showed how to take mixer apart, confirmed the problem, what parts to order and how to reassemble the mixer eliminating potential issues. Overall this DIY was an A plus. Read more
This planetary drip ring fits around a stand mixer's planetary assembly to cover the gap below the gearcase and help catch grease residue, restoring a clean, finished look where the beater hub meets the mixer head.
This was a problem that I'd had previously with this mixer. The worm gear, which is designed to fail (so that more serious damage does not occur to the motor), did fail while I was mixing some multi-grain bread dough. After the previous failure (pre-youtube days), I took the machine in for repair. The repair-shop cost came to about $150 in labor. Parts were extra. This time, I decided to do the repair myself, since I figured that I knew what was wrong. I found the appliancepartspros... Read more
Color: White
Removed the old planetary and cleaned metal shavings from gears. Transferred the old axle/gear assembly onto the new planetary. Inserted the new (and expensive) screw for the main gear and torqued it very tight (as well as the original other four screws). Slid the new planetary gears together and re-inserted the holding pin. Tapped on the cover ring and was done. Read more
Fix a mixer that won't start or runs intermittently with this brush holder cap. Secures the carbon brush and spring in the motor assembly.
Your training film was a lot of help for me. Thanks!!! Read more
The Grey Thumb Screw is an OEM Replacement Part designed for securing attachments on 4.5 and 5 Whirlpool and KitchenAid quart mixers. This screw plays a critical role in ensuring the stable and secure connection of various mixer attachments. With a use
Replaced it with ordered part. Read more
Replace your cracked, worn, or missing 4.5-quart stainless steel mixing bowl. Fits tilt-head stand mixers with handle for easy pouring and removal.
As soon as part arrived I removed 3 screws holding old plate, set new plate in, reinstalled screws and within 5 minutes repairs were done and wife was happy. Read more
This vertical center shaft aligns and drives the rotating components in the refrigerator's ice dispenser/crusher assembly, helping cubes and crushed ice dispense smoothly. Replacing a worn or stripped shaft restores reliable dispensing performance.
Replaced the center gear and since they sent the hub along I replaced that too just to be safe. Used the live chat before ordering to make sure I was ordering the correct part. The person I chatted with was very nice and very helpful and parts came in good shape, and just as ordered. Replaced the stripped gear the next day and added a bunch of grease and the mixer works like new. Was very impressed with their diagrams and helpful videos as well as their large selection of parts. The other... Read more
This flat spring restores proper tension and return action in the mechanism it supports. Replace a fatigued or broken spring to bring back crisp movement and keep linked parts aligned so the assembly operates smoothly.
After disassembling the upper half of the mixer, I found out that the Speed-link was broken, the flat spring was missing. Replaced Phase control board, Speed-link and flat spring. Now it works as good as new. Read more