Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

Lat3714aa Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Washer Spring Fastener Retaining Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001650

Secures components with constant tension to prevent looseness and vibration. Replace if broken, fatigued, or missing. Verify fit with your model number.

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Drum guides had worn out   Robert S. • North Apollo , PA • October 08, 2014

Replaced them. Read more

More
$9.63
Compare At:
$11.46
You Save:
$1.83

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Bleach Dispenser Tube
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001320

Bleach leaking onto the floor or not dispensing? A cracked or hardened bleach tube is the likely cause. Simple 5-minute fix with basic tools.

Do-It-Yourself Stories from Customers like You Leaking bleach tube   Mike C. • Willow Grove , PA • May 21, 2017

Replaced the tube and the clamp Read more

More
$75.95
Compare At:
$89.62
You Save:
$13.67

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw, 1 Piece
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

  • Fastens panels, brackets, covers, or internal parts to the chassis or frame
  • Helps maintain alignment and support, reducing rattle, vibration, or looseness
  • Replaces missing or damaged screws that have backed out, broken, or stripped
  • Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
  • Disconnect power; shut off water or gas supplies before servicing
  • Use the correct driver; start threads by hand to avoid cross-threading
  • Match length and thread to the original location; do not substitute with longer hardware
  • Tighten snugly; do not overtighten into plastic or thin metal

Do-It-Yourself Stories from Customers like You Bake element broken on jenn air model s125 downdraft slide in range   Patricia D. • Raleigh , NC • May 02, 2015

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

More
$21.46
Compare At:
$25.54
You Save:
$4.08

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Water Inlet Valve Screen
Genuine Whirlpool part
By: Whirlpool
Part Number: WP96160

This is a small mesh filter screen that fits inside the water inlet valve to catch sediment and debris from your household water supply before it enters the washer. It prevents mineral buildup and particles from clogging or damaging the valve internals. Replace this screen if your washer is filling slowly, not filling at all, or if the screen is visibly clogged, torn, or deteriorated.

Do-It-Yourself Stories from Customers like You Washing machine was having trouble delivering enough water on rinse cycle   Cynthia S. • Libertyville , IL • August 15, 2014

Went on internet, found a great site and learned that the cold water hose filter was very much clogged at the machine intake. Cleaned it and voila. Ordered an extra filter from Appliance Pros.com and literally was amazed that it arrive within 2 days of my internet order. Great efficiency and customer service….great experience. Will definitely use them in the future….thank you! Read more

More
$11.78
Compare At:
$14.02
You Save:
$2.24

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Outer Tub Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP211232

This is a rubber gasket seal that fits between the outer tub halves or around the tub ring of a washing machine, creating a watertight seal to prevent leaks during the wash and spin cycles. It compresses between the tub components when they are clamped together. Replace this seal if you notice water leaking from around the outer tub, pooling under the washer, or if the seal appears cracked, hardened, or deformed.

Do-It-Yourself Stories from Customers like You No agitation.   Susan B. • Apple Valley , CA • August 09, 2020

This was some repair! My SG1000 stackable is over 30 years old and was purchased second hand. I've replaced many parts in the dryer section, but besides a water inlet, this was my first repair to the washer. All of a sudden it started making a terrible noise and was not agitating the clothes. The spin cycle worked fine. I first replaced the two belts on the bottom, but when I removed the old ones I realized they did not look terribly worn and weren't the cause. Many stories on here indicated... Read more

More
$55.30
Compare At:
$66.36
You Save:
$11.06

IN STOCK
Ships Today Guaranteed
Add to Cart
Adjustable Leg
Genuine Whirlpool part
By: Whirlpool
Part Number: 22003428

Leg, adjustable (w/nut)

This part fixes the following symptoms
  • Shakes and moves
See more...
Do-It-Yourself Stories from Customers like You Needed new support adjustable legs for my maytag washer   Rodger M. • San Clemente , CA • November 17, 2014

Took off the old parts and replaced with the new parts Read more

More
$16.95
Compare At:
$20.34
You Save:
$3.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Leveling Leg Pad
Genuine Whirlpool part
By: Whirlpool
Part Number: WP210684

The Leveling Leg Pad is an OEM replacement part for Whirlpool washing machines. This small but essential component fits beneath the leveling legs, providing stability and preventing the appliance from moving or vibrating excessively during operation. It also protects flooring surfaces from potential scratches or damage.

Symptoms of a bad Leveling Leg Pad include:

  • Increased vibration or noise during the wash or spin cycle
  • The washing machine wobbling or becoming unsteady
  • Visible wear, cracks, or damage to the pad

Causes of a failing Leveling Leg Pad can include wear and tear from prolonged use, exposure to moisture, or excessive weight causing deformation. Replacing worn pads helps maintain the appliance's balance and efficiency.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For the leveling leg order 22003428.

This part fixes the following symptoms
  • Shakes and moves
See more...
Do-It-Yourself Stories from Customers like You Washer "bucking" while in spin cycle   Luis P. • Loveland , CO • June 27, 2017

New leveler pads Read more

More
$11.78
Compare At:
$13.90
You Save:
$2.12

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Water Inlet Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WP213013

Water inlet hose for washers and laundry centers. Connects water supply to fill valve. Replace if cracked, leaking, or worn to prevent floor leaks.

Do-It-Yourself Stories from Customers like You 35 year old Maytag washer/dryer stack unit with a water leak.   Paul K. • Naperville , IL • December 24, 2022

I cannot believe this machine still runs. APP has sold me repair parts for this unit now 3 times. First I wanted to replace the old belts. They still worked but was more a preventative thing. Next was a water control valve a few years ago. This time I noticed a leak near the valve again. I decided to buy a new valve and also replace all the rubber hoses that were 35 years old. The repair took about 3 hours. 1.5 to remove the old parts and do a cleaning that was greatly needed. 0.5 hours to... Read more

More
$41.95
Compare At:
$49.92
You Save:
$7.97

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Agitator Shaft Collar
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002340

Secures the agitator to the drive shaft in top-load washers. Replace this collar if it's cracked, worn, or missing to restore proper agitator alignment.

Do-It-Yourself Stories from Customers like You Agitator kept floating up when washing and would not wash or agitate   Todd W. • Alhambra , IL • December 13, 2015

I bought the $6.00 plastic clip that holds the agitator In place while washing and the $10.50 spanner wrench that takes the 2 top nuts off to get to the agitator stem the other tools necessary for the job which are just a couple of things I already had then watched the video on line of how to do the job and then did it the whole thing took about 2 hours plus I took my time and gave both tubs a very good cleaning. I paid a guy $400.00 9 months earlier to do the same job wish I hadn't, should... Read more

More
$5.95
Compare At:
$7.08
You Save:
$1.13

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Agitator Seal Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP6-0A57420

Seals the agitator shaft opening to prevent leaks and protect internal components. Replace if you see water leaking from the center post during wash cycles.

Do-It-Yourself Stories from Customers like You Washer would only spin.   Byron V. • Bellevue , MI • February 04, 2020

Found the wonderful parts diagrams you most generously share online and a couple of YouTube videos . I determined it should be repairable. In my cast the agitator shaft was frozen (rusted) in place. I was very fortunate to have been able to eventually remove it with the use of a lot of BP penetrating oil and heat. Long and short the replacement parts fit perfectly and the washer is running like new. Special thanks to the online support make my repair possible. Read more

More
$23.95
Compare At:
$28.50
You Save:
$4.55

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Outer Tub To Pump Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY212989

Internal hose that channels water from the washer's outer tub to the drain pump. Replace if cracked, leaking, or worn to prevent puddles under the machine.

Do-It-Yourself Stories from Customers like You Leaking hose at tub not bad for 32 year old machine   Gary W. • Chubuck , ID • December 25, 2016

Removed front of washing machine, loosened clamps, got wet, replaced hose, tightened clamps, tested hose--no leaks--job done. PLEASE, PLEASE put up a description indicating the length of hose, measured along its length, is 15." It will save other folks wondering if they ordered the wrong item. Thank You. Read more

More
$44.24
Compare At:
$65.49
You Save:
$21.25

IN STOCK
Ships Today Guaranteed
Add to Cart
Drain Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22003410

Size: 90 inches long. To order hose extension use 12001585. To order siphon break use 76660.

Do-It-Yourself Stories from Customers like You General overhaul of a 14 year old machine   Todd F. • Wellsburg , WV • January 20, 2016

Model# MAV7257AWW Maytag Atlantis Washing Machine. Repairs were fairly easy along with the videos appliancepartspros offers on their website. Parts also came with instructions on how to install. Other videos were available on You Tube. The only part difficult to install was Thrust bearing kit - make sure when installing to pull down on shaft so washer and e-clip will fit. Another note, you can get a pulley for your replacement motor pulley on eBay and Maytag.com. Just pay close attention to... Read more

More
$50.57
Compare At:
$60.18
You Save:
$9.61

IN STOCK
Ships Today Guaranteed
Add to Cart
Hose Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP616099

This hose clamp secures a hose connection to prevent leaks and keep your appliance running smoothly. It provides a tight, reliable hold on the hose fitting so water or air stays contained during operation.

  • Tightens around a hose and fitting to maintain a secure seal
  • Helps stop drips, seepage, or loose connections
  • Common fix when you see moisture around a hose joint
  • Useful if a clamp is rusted, stretched, or no longer holding tension
What's included: One hose clamp. Install notes:
  • Unplug power and shut off water (if applicable) before servicing
  • Note clamp position/orientation before removal
  • Use appropriate screwdriver or nut driver to tighten evenly
  • Do not overtighten—ensure a snug, leak-free seal without damaging the hose

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Water leak   Steven K. • New City , NY • August 10, 2018

Took off cover, installed new parts. Read more

More
$4.60
Compare At:
$5.47
You Save:
$0.87

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Injector Fill Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY215234

Connects water supply to the dispenser injector in your washer. Replace if cracked, nicked, or leaking. Installs at the top under the lid assembly.

Do-It-Yourself Stories from Customers like You Hole in the injector valve and a nick in the injector fill hose   Ray A. • Union Beach , NJ • July 10, 2016

First the parts showed up as promised in 2 days. Injector fill hose wasn't leaking but replaced to be on safe side. Everything went together just like OEM parts. Cost less then having my appliance guy just walk thru the door at $80.00 Read more

More
$41.95
Compare At:
$49.92
You Save:
$7.97

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Water Level Pressure Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001776

Fix washer overfilling or not filling properly with a new water level pressure switch. Controls fill shutoff and cycle transitions. DIY repair.

Do-It-Yourself Stories from Customers like You Water level switch not working.   Steve S. • Anderson , IN • January 22, 2018

Replaced both, the water level switch and the water level hose. Watched the how to video first on your site and made the repair easy. Read more

More
$119.54
Compare At:
$141.06
You Save:
$21.52

IN STOCK
Ships Today Guaranteed
Add to Cart
Hose Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489503

This hose clamp secures a rubber or plastic hose to its fitting to maintain a tight, leak-resistant seal. Replace a worn or missing clamp to stop drips and keep appliance water connections secure.

  • Fastens a hose to a barb or port to prevent leaks
  • Helps keep hoses from slipping off due to vibration or pressure
  • Restores proper sealing when a clamp is rusted, bent, or stripped
  • Common symptoms: water dripping at a hose joint, loose hose connection, or a clamp that won't tighten
What's included: 1 hose clamp Install notes:
  • Disconnect power and shut off the water supply before servicing
  • Place a towel to catch residual water when removing hoses
  • Position the clamp just behind the hose barb/bead and secure with the appropriate tool
  • Restore water and power, then run a quick check for leaks at the connection

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You The maytag washer was leaking water during fillup and rinse   Lucian L. • Addison , IL • October 06, 2014

I ordered the required parts from your website, the parts required were easily identified from the website tub blowup. The parts were delivered within 2 days and installed within 15 minutes Read more

More
$7.49
Compare At:
$8.91
You Save:
$1.42

IN STOCK
Ships Today Guaranteed
Add to Cart
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store