Lat8506aae Timer Parts

Best Seller

Genuine Whirlpool part

Timer Knob Insert

By: Whirlpool

Part Number: WP22001664

The Timer Knob Insert is an OEM replacement part for Whirlpool dryers. This is a cap located on the timer knob on the control panel. Color: White. This is the timer knob cap only. For the complete assembly, you must also order the knob and skirt.

Causes of timer knob Insert failure can include cracked plastic from years of repeated turning motions. Wear on components also occurs due to extensive lifetime usage cycles.

Symptoms of a faulty timer knob insert include:

Knob becomes loose, detached or inoperable for timings scrolling
Cracks appear exposing internal timer parts

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

Do-It-Yourself Stories from Customers like You Broken knob James G. • Decatur , IL • November 16, 2014

It's working now Read more

$9.63

Compare At:: $11.46
You Save:: $1.83

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Water Injector

5.0 (18)

By: Whirlpool

Part Number: WP22001304

The Water Injector is an OEM part for Whirlpool washing machines. This component is responsible for distributing water into the washing machine during the wash cycle, ensuring that clothes are thoroughly saturated and cleaned. It connects to the water supply and directs water into the tub at the appropriate times.

Common causes of a bad water injector include blockages from mineral deposits, wear and tear from frequent use, or damage due to high water pressure. Over time, the injector's effectiveness can diminish, impacting the washing machine's performance.

Symptoms of a bad water injector include:

Insufficient water entering the washing machine
Longer fill times or failure to fill at all
Poor cleaning performance
Leaks or drips around the injector area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Water squirted out the back of the machine when i tried to fill the tub Walter W. • Saint Paul , MN • June 30, 2014

Removed the front panel and removed the screw from the console which revealed a broken plastic tab on the right side of the old injector. Replaced the old injector with the new one and that took care of the problem. Read more

$56.34

Compare At:: $66.48
You Save:: $10.14

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Appliance Fastener Screw

4.6 (13)

By: Whirlpool

Part Number: WPY014874

Factory fastener screw secures panels, brackets, and trim inside appliances. Replace missing, stripped, or damaged screws to restore tight fit.

Do-It-Yourself Stories from Customers like You Loud squealing noise William B. • Rocky Mount , NC • December 17, 2018

First replaced the drum rollers...that wasn't it..took dryer back apart and spun the belt tension wheel by hand (should have done this the first time I took the dryer apart) and it squeaked. so I ordered the full parts: wheel, idler arm, idler spring, arm sleeve, E ring..Put it back together and whoa..no more squealing!! Read more

$7.56

Compare At:: $8.32
You Save:: $0.76

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Washer Tub Cover Gasket

4.7 (6)

By: Whirlpool

Part Number: WP22001007

Seals the tub cover to prevent leaks during wash and spin cycles. Replace if water leaks from the top of the tub. Confirm fit with your model number.

Do-It-Yourself Stories from Customers like You Leaking water from washing tub E M. • Danville , KY • May 22, 2016

Replaced mounting stem and tub bearings Read more

$60.52

Compare At:: $72.02
You Save:: $11.50

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Washer Agitator Assembly With Auger And Base

5.0 (36)

By: Whirlpool

Part Number: 22001821

This complete agitator assembly includes the auger (upper portion) and base (lower portion) that work together to move clothes through the wash water in a top-load washer. The base sweeps clothes outward while the auger spirals them downward, creating thorough cleaning action. Replace this assembly if clothes are not getting clean, the agitator wobbles excessively, or the auger no longer ratchets and moves independently from the base.

Do-It-Yourself Stories from Customers like You The top parto of the agitator was floting to the top of the washwer Natalie M. • Jamica Plain , MA • January 16, 2015

I replaced the entire agitator (my appliance agitator could only be replaced in one part not the upper part only). It was super easy but one thing....the video on the website was not helpful because my maytag washer is older and does NOT have a screw down inside the agitator but has one 1/4 inch hex nut on the side down by the base. Good for me though because all I had to do was unscrew the nut, put the new agitator on, tighten the new nut and DONE!! Read more

$174.21

Compare At:: $207.31
You Save:: $33.10

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Washer Lid Hinge Ball

5.0 (7)

By: Whirlpool

Part Number: WP211726

Small plastic ball component that snaps into washer lid hinge mechanism. Replace when missing, cracked, or broken to restore smooth lid opening and closing.

This part fixes the following symptoms

Lid or door won't close

Do-It-Yourself Stories from Customers like You Sometimes the washer wouldn't start the wash cycle when the fill cycle was done it would just sit until the lid was picked up or bumped Eugene N. • Roswell , NM • August 28, 2016

The lid shut-off switch is located behind the lid How About That. I order the plastic ball the hold the lid in place plus the lid shut off switch. I watched the video that AppliancePartsPros.com has on how to replace the lid and the plastic balls. I removed the lid to get to the two philips head screws to remove that part of the shut-off switch. I took the new switch out of the package and compared it to the old switch. I assembled the switch just like the old switch look using the new... Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Fill Hose

4.8 (15)

By: Whirlpool

Part Number: WP89503

Size: 5 foot long. Rubber fill hose used on most automatic washing machines. Two hoses used per machine.

Do-It-Yourself Stories from Customers like You Low water flow and fabric softener would dispense immediately when cycle started Bob G. • Sylacauga , AL • January 19, 2019

Replaced flow meter and control valve Read more

$19.31

Compare At:: $22.79
You Save:: $3.48

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Washer Spring Fastener Retaining Clip

4.9 (8)

By: Whirlpool

Part Number: WP22001650

Secures components with constant tension to prevent looseness and vibration. Replace if broken, fatigued, or missing. Verify fit with your model number.

This part fixes the following symptoms

Noisy

Do-It-Yourself Stories from Customers like You Drum guides had worn out Robert S. • North Apollo , PA • October 08, 2014

Replaced them. Read more

$9.63

Compare At:: $11.46
You Save:: $1.83

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Washer Bleach Dispenser Tube

5.0 (5)

By: Whirlpool

Part Number: WP22001320

Bleach leaking onto the floor or not dispensing? A cracked or hardened bleach tube is the likely cause. Simple 5-minute fix with basic tools.

Do-It-Yourself Stories from Customers like You Leaking bleach tube Mike C. • Willow Grove , PA • May 21, 2017

Replaced the tube and the clamp Read more

$75.95

Compare At:: $89.62
You Save:: $13.67

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Screw, 1 Piece

4.9 (18)

By: Whirlpool

Part Number: W11233072

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

Fastens panels, brackets, covers, or internal parts to the chassis or frame
Helps maintain alignment and support, reducing rattle, vibration, or looseness
Replaces missing or damaged screws that have backed out, broken, or stripped
Restores secure mounting after service when original hardware is lost

What's included: 1 screw Install notes:

Disconnect power; shut off water or gas supplies before servicing
Use the correct driver; start threads by hand to avoid cross-threading
Match length and thread to the original location; do not substitute with longer hardware
Tighten snugly; do not overtighten into plastic or thin metal

Do-It-Yourself Stories from Customers like You Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

$21.46

Compare At:: $25.54
You Save:: $4.08

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Washer Water Inlet Valve Screen

4.9 (9)

By: Whirlpool

Part Number: WP96160

This is a small mesh filter screen that fits inside the water inlet valve to catch sediment and debris from your household water supply before it enters the washer. It prevents mineral buildup and particles from clogging or damaging the valve internals. Replace this screen if your washer is filling slowly, not filling at all, or if the screen is visibly clogged, torn, or deteriorated.

Do-It-Yourself Stories from Customers like You Washing machine was having trouble delivering enough water on rinse cycle Cynthia S. • Libertyville , IL • August 15, 2014

Went on internet, found a great site and learned that the cold water hose filter was very much clogged at the machine intake. Cleaned it and voila. Ordered an extra filter from Appliance Pros.com and literally was amazed that it arrive within 2 days of my internet order. Great efficiency and customer service….great experience. Will definitely use them in the future….thank you! Read more

$11.78

Compare At:: $14.02
You Save:: $2.24

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Adjustable Leg

5.0 (5)

By: Whirlpool

Part Number: 22003428

Leg, adjustable (w/nut)

This part fixes the following symptoms

Shakes and moves

Do-It-Yourself Stories from Customers like You Needed new support adjustable legs for my maytag washer Rodger M. • San Clemente , CA • November 17, 2014

Took off the old parts and replaced with the new parts Read more

$16.95

Compare At:: $20.34
You Save:: $3.39

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Leveling Leg Pad

5.0 (8)

By: Whirlpool

Part Number: WP210684

The Leveling Leg Pad is an OEM replacement part for Whirlpool washing machines. This small but essential component fits beneath the leveling legs, providing stability and preventing the appliance from moving or vibrating excessively during operation. It also protects flooring surfaces from potential scratches or damage.

Symptoms of a bad Leveling Leg Pad include:

Increased vibration or noise during the wash or spin cycle
The washing machine wobbling or becoming unsteady
Visible wear, cracks, or damage to the pad

Causes of a failing Leveling Leg Pad can include wear and tear from prolonged use, exposure to moisture, or excessive weight causing deformation. Replacing worn pads helps maintain the appliance's balance and efficiency.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For the leveling leg order 22003428.

This part fixes the following symptoms

Shakes and moves

Do-It-Yourself Stories from Customers like You Washer "bucking" while in spin cycle Luis P. • Loveland , CO • June 27, 2017

New leveler pads Read more

$11.78

Compare At:: $13.90
You Save:: $2.12

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Water Level Switch (5-Position Rotary)

4.8 (12)

By: Whirlpool

Part Number: WP22001656

This is the washer's water level switch that senses tub level via air pressure and provides five selectable fill settings. Replacing a failed switch restores accurate filling and lets the cycle advance properly through wash, rinse, and spin.

Monitors air pressure from the tub to detect actual water level
Controls the inlet valves to start/stop filling at the selected setting
Signals the timer/control to begin agitation and advance the cycle once full
Common symptoms: overfilling or water keeps running, stops filling too soon or won't fill, inconsistent water levels, cycle won't advance due to incorrect level detection

What's included: 1 water level pressure switch with 5-position rotary selector Install notes:

Disconnect power and turn off water supply before servicing
Access the control console; remove the selector knob/dial and panel as needed
Note wire locations (take a photo), move the harness, and transfer the pressure hose; ensure the hose is clear and firmly seated
Securely mount the new switch, reassemble the console/knob, restore utilities, and test each fill level

Do-It-Yourself Stories from Customers like You Water level in Maytag washer was always high and was not adjustable Von D. • San Bernardino , CA • December 21, 2017

Replaced the water level switch and water level pressure switch hose. Video on AppliancePartsPros.com detailed the procedure. Read more

$127.65

Compare At:: $150.63
You Save:: $22.98

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Washer Agitator Shaft Collar

5.0 (8)

By: Whirlpool

Part Number: WP22002340

Secures the agitator to the drive shaft in top-load washers. Replace this collar if it's cracked, worn, or missing to restore proper agitator alignment.

Do-It-Yourself Stories from Customers like You Agitator kept floating up when washing and would not wash or agitate Todd W. • Alhambra , IL • December 13, 2015

I bought the $6.00 plastic clip that holds the agitator In place while washing and the $10.50 spanner wrench that takes the 2 top nuts off to get to the agitator stem the other tools necessary for the job which are just a couple of things I already had then watched the video on line of how to do the job and then did it the whole thing took about 2 hours plus I took my time and gave both tubs a very good cleaning. I paid a guy $400.00 9 months earlier to do the same job wish I hadn't, should... Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Hose Clamp

5.0 (6)

By: Whirlpool

Part Number: WP489503

This hose clamp secures a rubber or plastic hose to its fitting to maintain a tight, leak-resistant seal. Replace a worn or missing clamp to stop drips and keep appliance water connections secure.

Fastens a hose to a barb or port to prevent leaks
Helps keep hoses from slipping off due to vibration or pressure
Restores proper sealing when a clamp is rusted, bent, or stripped
Common symptoms: water dripping at a hose joint, loose hose connection, or a clamp that won't tighten

What's included: 1 hose clamp Install notes:

Disconnect power and shut off the water supply before servicing
Place a towel to catch residual water when removing hoses
Position the clamp just behind the hose barb/bead and secure with the appropriate tool
Restore water and power, then run a quick check for leaks at the connection

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You Leaking bleach tube Mike C. • Willow Grove , PA • May 21, 2017

Replaced the tube and the clamp Read more

$7.49

Compare At:: $8.91
You Save:: $1.42

IN STOCK

Ships Monday Guaranteed

Add to Cart

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Lat8506aae Timer Parts

Timer Knob Insert

Water Injector

Appliance Fastener Screw

Washer Tub Cover Gasket

Washer Agitator Assembly With Auger And Base

Washer Lid Hinge Ball

Fill Hose

Washer Spring Fastener Retaining Clip

Washer Bleach Dispenser Tube

Screw, 1 Piece

Washer Water Inlet Valve Screen

Adjustable Leg

Leveling Leg Pad

Water Level Switch (5-Position Rotary)

Washer Agitator Shaft Collar

Hose Clamp

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Lat8506aae Timer Parts

We respect your privacy

Manage consent preferences