Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The dishwasher circulation pump motor assembly powers the pump that pressurizes water and pushes it up through the spray arms to clean your dishes. Without it, water cannot circulate through the wash system. Replace this part if your dishwasher fills with water but the spray arms aren't spinning, dishes are coming out dirty, or you hear a humming noise but no water is spraying.
So all of a sudden the dishwasher stops working, "0E error"on the panel. Did some google searches and found that it might be the filter, which I did not know needed to be changed, or worse, the motor. Took the filter off per online tutorial (easy) and mopped up all the stagnant water. Poking around, I find the small rubber check valve that has broken. Had to fish it out with tweezers. Long story short, it was not the motor and I doubt it was the filter. It was this $1.87 rubber drainage... Read more
This is a safety switch assembly that detects whether the dryer door is open or closed. It signals the control board to stop the drum and heating element when the door is opened during a cycle. Replace this switch if the dryer will not start, stops mid-cycle unexpectedly, or continues running with the door open.
Bought a new switch assembly, watched the video, and replaced the switch. Thr dryer now runs fine. Replacement part matched esxactly. Read more
This guide assembly attaches to the interior side wall of the dishwasher and allows the dish rack to slide in and out smoothly. It includes the rail or track that supports the rack's rollers during operation. Replace this part if the dish rack is difficult to slide, sits crooked, or falls off its track when loading or unloading dishes.
I ordered the sprayer arm (nozzle assembly) and guide assembly. It took about five minutes to remove the old and install the new. Very simple and fixed the problem. Read more
Fix uneven cooking or baking in your range. This convection fan motor circulates hot air for consistent heat distribution. Moderate DIY repair.
Took it apart and replaced it. Read more
Seals the cam motor shaft to prevent water leaking into motor and electrical components. Replace if you notice leaks around the motor area or water damage.
This was a very simple repair. It was done in about an hour. It involves disconnecting the dishwasher, emptying the water from the inside, taking it out and flipping it over, and replacing the diverter motor. This repair is done on the underside of the dishwasher, nothing to disconnect inside (just remember to remove the baskets). It would be wise to order the motor seal and micro switch that goes with it as they are all cheap parts and easy to swap out during the procedure. Be sure to take... Read more
The Noise Filter Assembly is an OEM part for LG washing machines, designed to minimize electrical noise interference within the appliance. This essential component ensures that the washer operates smoothly without emitting disruptive sounds that can affect both the performance of the washer and the comfort of your home environment.
Causes of a bad Noise Filter Assembly can range from wear and tear over time to exposure to power surges or electrical spikes, which can damage the internal components of the filter.
Symptoms of a bad Noise Filter Assembly include:
This OEM LG part is also compatible with some Kenmore models.
Searched the web and determined it was something called a noise filter. Ordered the part from ApplianceParts Pros. Received it in about 3 days, normal shipping. Replaced the part. Took about 15 minutes from start to finish. Problem solved. Cost less than $50. Read more
Creates a watertight seal around the dishwasher tub opening. Replace if you notice leaks, excess noise, or poor wash performance. Confirm fit with your model.
Replaced tub gasket around interior of washer tub. Read more
Protective cover that secures and encloses the water filter in your refrigerator's interior. Replace if cracked, broken, or tabs are damaged.
Used screwdriver to push in plastic tabs holding old unit to the top of the refrigerator box Read more
Cam kit for refrigerator door hinges. Includes black and white cams that install at door bottom and hinge. Replace when cracked, broken, or worn.
Used floor jack to lift and secure door, left upper hinge point in place, removed lower hinge support, removed old cams and installed new ones and lubricated, secured and adjusted hinge . Read more
If your dryer door pops open during cycles or won't stay closed, this door latch assembly restores a secure closure. Easy 5-minute DIY repair.
I just simply just take 2screws off and remove old latch off and replace new latch on. This is easy not that hard. Read more
The Light Bulb is an OEM part for LG dryers. This bulb illuminates the interior of the dryer drum, making it easier to see and load or unload laundry, especially in low-light conditions.
Over time, the light bulb can burn out or become damaged due to regular use and exposure to high temperatures within the dryer. Causes of a bad light bulb include normal wear and tear, electrical surges, or physical damage to the bulb.
Symptoms of a bad light bulb include:
This OEM LG part is also compatible with Sears/Kenmore dryers.
After unplugging the dryer from the wall socket, I used a screwdriver ( Phillips ) to remove the light cover fixture. This gave me access to the bulb which had burned out. I first use my fingers to remove the bulb but the base came lose from the glass bulb. I then used a needle nose pliers to remove the metal base of the bulb from the light fixture. Once the metal base was removed I used my fingers to replace the old bulb with a new one. It screws in easily. Now I replaced the light fixture... Read more
This Door Seal is an OEM part for LG dishwashers. It plays a crucial role in preventing water leaks by creating a watertight seal around the dishwasher door.
Over time, door seals can degrade due to constant exposure to water, detergents, and varying temperatures. This can lead to a compromised seal, increasing the risk of leaks during operation.
Symptoms of a failing door seal in a dishwasher include:
This OEM LG part is also compatible with some Sears/Kenmore models.
Dishes not drying or water not getting hot? Your dishwasher heating element may have failed. Moderate DIY repair, 1-2 hours with cabinet removal required.
The dishes were not drying on our 5yr old LG dishwasher. After removing the front door cover, I verified that the blower motor was operational and the vent was not blocked. I removed the diswasher from the cabinet, accessed the heating element from the bottom of the unit, and found the heating element did not have continuity. The part was ordered on a Sunday, and was at my doorstep on Tuesday at 5:00pm. Reasonable price and great service! After installing the new heating element, the... Read more
Upper rack assembly for LG dishwashers. Replace when rack shows rust, cracked welds, broken rollers, or warped frame. Includes tines and mounting hardware.
Replaced dishwasher rack assembly. Read more
Dryer won't auto dry or cycles run too long? This moisture sensor wire harness connects sensor bars to control. Restores accurate dry cycles. DIY-friendly.
I spoke with the experts at parts pro and they suspected the main power board. I ordered the main power board along with the control panel. Since I was taking everything apart I decided to replace other components as well- thermostats, thermistor , sensor wire. When I was all done the old LG was back to working like new. Oh while I was at it I cleaned and vacuumed out the complete machine. Great factory parts, videos p, service and videos, the price of all the parts was less than a repair... Read more
This side venting kit allows you to redirect your dryer's exhaust air out through a side wall instead of the back of the unit. It includes the necessary ductwork and connections to safely route hot, moist air outside your home. Use this kit when your dryer installation requires side venting due to space constraints or structural limitations.
This was a pretty simple install if you know how to take apart your dryer. I have a kenmore dryer which is identical to an LG dryer. My kenmore dryer was actually made by LG at that time. You can find the specific model on youtube and see how your dryer comes apart. While doing this i cleaned all the inner parts of my dryer. The parts that come in the kit can be bought at home depot for much less but you don't know what length you need. I ordered the kit so I could have the back plate and... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.