Maytag Atlantis Parts

The Washer Tub to Pump Hose is an OEM part for Whirlpool washing machines. This hose connects the washer tub to the drain pump, facilitating the proper drainage of water from the tub during the wash and spin cycles.  

Causes of a bad tub to pump hose can include wear and tear from frequent use, blockages from lint or debris, and damage from overloading the washer or mishandling during maintenance.  

Symptoms of a bad tub to pump hose include:

• Leaks during the wash or spin cycles
• Water not draining properly from the washer
• Visible cracks, holes, or wear in the hose
• Unusual noises during the drain cycle

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This cam fits between the refrigerator door and hinge to create smooth, controlled movement and a self-closing feel. Replacing a worn cam restores proper door alignment and gasket contact to help maintain temperature and reduce frost or moisture.

• Works with the hinge to guide door movement and provide a detent/self-close action
• Helps keep the door aligned for an even gasket seal and smoother opening/closing
• Worn cam symptoms can include clicking/popping at the hinge, a door that sags, swings open, or won't fully close without lifting/pushing
• Contribute to temperature fluctuations or condensation if the door doesn't seal consistently

• Disconnect power; unload and support the door to prevent damage
• Remove hinge cover and fasteners; lift the door as needed to access/replace the cam
• Note cam orientation and reuse original hardware, spacers, and shims
• Adjust leveling/hinge if needed

This washer lid switch is the safety interlock that tells the machine the lid is closed. Replacing a worn switch restores proper spin and cycle operation and helps prevent nuisance shutoffs when the lid is bumped or opened.

• Detects lid position and enables washer operation only when the lid is closed
• Interrupts power with the lid open for user safety
• Typical symptoms of failure: washer won't start or won't spin, stops mid-cycle, or runs only when pressing down on the lid
• Mechanical position sensor; it does not lock the lid

• Disconnect power before servicing; verify the tub is fully stopped
• Access is typically from the main top or cabinet—remove screws or release spring clips as designed
• Note wire routing and mounting orientation; transfer any existing hardware and secure the ground as originally installed
• Test lid-close operation before reassembling and running a cycle

This top load washer agitator assembly includes both the upper and lower parts of the agitator.

The Dryer Timer Knob is an OEM replacement part for Whirlpool dryers. It allows users to set the drying time and cycle, providing control over the dryer's operation. This knob fits securely onto the timer shaft, and it allows for the selection of the desired drying cycle and time.

Color: White with Blue Trim

Cap Sold Separately

Over time, wear and tear, excessive force when turning, or accidental impact can cause the timer knob to crack, loosen, or lose its grip on the timer shaft. This makes it difficult to select and maintain accurate drying cycles.

Symptoms of a faulty Dryer Timer Knob include:

• Difficulty turning the knob to select the desired cycle
• Knob slipping or turning loosely
• Cracks, breaks, or missing parts

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Size: 5 foot long. Rubber fill hose used on most automatic washing machines. Two hoses used per machine.

Plunger for lid switch.

The Timer Knob Cap is an OEM replacement part for Whirlpool washers and dryers. This cap covers the timer knob, giving a clean and polished appearance to the control panel.

Color: Chrome

The Timer Knob Cap might need replacement if it becomes cracked, discolored, or damaged due to prolonged use, accidental mishandling, or exposure to harsh cleaning agents. Additionally, frequent turning and adjustments over time may cause wear.

Symptoms of a failing Timer Knob Cap include:

• Difficulty turning the timer knob
• Loose or missing cap
• Timer knob slipping or not staying in place

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Size: 90 inches long. To order hose extension use 12001585. To order siphon break use 76660.

This plunger guide tube aligns and supports a moving plunger within the washer's mechanism so it travels smoothly and engages reliably. Replacing a worn or cracked guide can restore consistent operation and prevent sticking or misalignment issues.

• Keeps the plunger centered for straight, low-friction movement
• Helps prevent sticking/binding that can stop the mechanism from engaging
• Common symptoms: intermittent or failed actuation, weak or no dispensing/engagement, clicking from a solenoid with no movement
• Visual clues: worn, cracked, or deformed guide tube

• Disconnect power and turn off water supply before servicing.
• Access location varies by model; remove covers or panels to reach the affected dispenser/actuator assembly.
• Note orientation and seating depth; transfer any springs or retainers from the old guide if present.
• The plunger moves freely in the new guide before reassembly and testing.

To order indicator light use WP903115.

Replace a worn rear self-leveling leg to restore a stable, level appliance. This foot supports the back of the cabinet and automatically compensates for floor unevenness to help reduce vibration, rocking, and noise during operation.

• Supports and self-levels the rear of the cabinet to maintain stability on uneven floors
• Helps address wobbling/rocking, excessive vibration, rattling or "walking," and an appliance that won't sit level
• Replaces a rear leg that is missing, cracked, or worn
• Promotes smoother operation by helping the unit sit properly level

• Disconnect power; if applicable, turn off the water supply
• With assistance, carefully tilt the appliance to access the rear base
• Remove the damaged rear leg from its mount and install the new leg, ensuring it seats fully
• Lower the unit, verify level with a bubble level, and adjust front legs as needed for final leveling

This washer timer controls and advances the cycle, sending power to the valve, motor, and pump at the right times. Replace it if the cycle stalls, won't start, or never completes.

• Advances the wash program through fill, agitate, drain, and spin by closing/opening internal contacts
• Directs power to key components at set intervals to keep the cycle moving
• Failure symptoms include a cycle that won't advance, stops mid-cycle, runs indefinitely, or only clicks/hums
• Also prevent the washer from starting a selected cycle

• Unplug the washer before servicing
• Remove the control knob/dial and access the control console to reach the timer
• Transfer wires from the old timer to the new one one-by-one to matching terminals
• Secure the timer, reassemble the console, reinstall the knob/dial, and test

This surface burner valve controls gas flow to a cooktop or range burner for smooth ignition and precise flame adjustment. Replacing a worn valve restores reliable lighting and consistent simmer-to-high control at the knob. What it does:

• Regulates and meters gas flow to a surface burner from Off through all heat settings
• Wear or blockage can cause no ignition, hard-to-turn knob, or poor/unstable flame
• Helps correct burners that won't adjust properly or won't stay lit
• Ensures safer, consistent burner performance when operating correctly

• 1 surface burner valve

• Disconnect power and shut off gas supply before servicing; allow appliance to cool
• Work in a well-ventilated area and follow local codes
• Note knob orientation; transfer any orifice fittings or mounting hardware from the old valve
• After installation, check all connections for leaks using a non-corrosive leak-detection solution

One piece. Works on most Maytag washers. Color: white. It measures about 5 inches in diameter, and 5-1/2 inches high.

This replacement screw secures appliance panels and components. Use this OEM fastener to swap out stripped, corroded, or missing hardware so assemblies stay tight, aligned, and quiet for reliable day-to-day operation.

• Provides secure attachment for panels, brackets, and internal assemblies
• Direct replacement for stripped, corroded, or lost screws
• Can help with symptoms like vibration, rattling, or loose/misaligned parts
• Supports proper fit to reduce gaps or unwanted movement

• Disconnect power; for gas or water appliances, shut off the supply before service
• Note hardware order and retain any spacers or clips from the original setup
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Repair or replace the mating part before installation