Maytag Lde8704acm Parts

Best Seller

Genuine Whirlpool part

Door Catch Kit

By: Whirlpool

Part Number: LA-1003

The Door Catch Kit is an OEM part for Whirlpool dryers. It includes the door catch and the necessary mounting hardware to secure it in place. This kit ensures the dryer door remains securely closed during operation, preventing heat loss and ensuring the appliance functions efficiently.

Causes of a bad door catch include regular wear and tear, physical damage, or misalignment of the door, which can impact the catch's ability to latch properly.

Symptoms of a bad door catch include:

The dryer door not staying closed
Difficulty latching the door shut
The dryer stopping mid-cycle due to the door opening

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Door won't close
Shuts off too soon
Doesn't shut off
Takes too long to dry

Do-It-Yourself Stories from Customers like You Door clip to my dryer broke Richard D. • North Dinwiddie , VA • March 15, 2014

Ordered a new clip and installed it. Easy to do. Unplugged the dryer. Removed the front. It is only held on by two screws. Removed wires to the door switch. removed the female end (it had the broken male piece in it. Inserted the new female part in the front, clipped in the male part into the door and reconnected the door switch wires, screwed the front back on. Job done. Total time was less than 10 minutes. Works like new. Read more

$24.95

Compare At:: $29.94
You Save:: $4.99

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Thermal Fuse

4.9 (15)

By: Whirlpool

Part Number: WP306604

The Thermal Fuse is an OEM replacement part for Whirlpool dryers. This safety device monitors and protects heating elements inside the dryer. If temperatures rise too high due to a blockage or other issue, the fuse automatically opens the electrical circuit to cease further heating.

Symptoms of a bad thermal fuse include:

Dryer failing to heat or stay warm during cycles
Fluctuating or inconsistent heat levels
Tripped circuit breakers after drying

Causes of failure involve wear or damage from years of high heat exposure. Over time, components become brittle and less responsive.

This OEM Whirlpool replacement is also compatible with some Kenmore, Admiral, Roper, and Estate dryer models.

This part fixes the following symptoms

Won't start
No heat or not enough heat

Do-It-Yourself Stories from Customers like You Maytag gas dryer was not heating Christopher P. • Los Angeles , CA • October 04, 2014

Did some dryer repair research (dryer not heating) on the internet. Bought an ohm meter, opened up the dryer and tested the cut-off-T, high limit thermostat, dryer igniter, flame sensor, cycling thermostat for continuity. The igniter was bad, the other parts tested ok. Went online to AppliancePartsPros.com searched for a new igniter for my specific dryer model, found the right replacement igniter and watched the video on how to replace the igniter. Because my dryer is old (15+ years) and I... Read more

$28.95

Compare At:: $34.45
You Save:: $5.50

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Heating Element Assembly

4.9 (19)

By: Whirlpool

Part Number: WPY308612

Includes element, heater enclosure and ceramic insulators.

Do-It-Yourself Stories from Customers like You Overheating maytag dryer Mike H. • Sammamish , WA • December 31, 2015

Our dryer suddenly began overheating while drying. Outside of the dryer cabinet was uncomfortably warm to the touch, dryer drum was hot, charred smelling laundry. Based on what I read it was likely one of two things - a failed cycling thermostat or a shorted heating element. First I cleaned the vent hose and ducting to ensure good airflow, which I had. I opened the circuit breaker first, then took off the door and front cover. I started with a thorough cleaning of the dryer with a vaccuum... Read more

$163.95

Compare At:: $195.10
You Save:: $31.15

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.6 (7)

By: Whirlpool

Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

Loose or wobbly components within the appliance
Panels or parts that are not securely attached
Rattling or unusual noises due to loose parts
Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014

One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more

$7.95

Compare At:: $9.46
You Save:: $1.51

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Do you need help?

Get Questions Answered Instantly.

1-877-477-7278 Online

Live Help

Best Seller

Genuine Whirlpool part

Hex Nut

4.9 (20)

By: Whirlpool

Part Number: WP33001443

This Hex Nut is a small but critical fastener used to secure brackets, panels, and internal assemblies in your appliance. Replacing a stripped, corroded, or missing nut restores a tight, rattle-free, and safe installation.

Threads onto a matching bolt or stud to clamp parts together
Helps maintain alignment and reduce vibration-related loosening
Commonly used on panels, brackets, supports, and internal assemblies
Replace when threads are damaged, hex flats are rounded, or hardware is missing
Symptoms can include loose or rattling components or hardware that won't stay tight

What's included: One hex nut. Install notes:

Disconnect power and, if applicable, shut off gas or water before servicing
Use the correct-size nut driver or wrench to avoid rounding the hex
Start the nut by hand to prevent cross-threading; tighten snugly without over-torquing
Inspect and replace any damaged mating bolt/stud or washer for a secure repair

Do-It-Yourself Stories from Customers like You The rollers needed to be replaced, the axles for the rollers needed to be replaced, the tension pulley roller needed to be replaced, the belt needed to be replaced Richard G. • El Paso , TX • December 18, 2018

It took me about 2 hours to take everything apart and get it back together & running again with no problems. All the parts I ordered were exactly what I needed to fix everything. Thank you all !!! Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw, 1 Piece

4.6 (13)

By: Whirlpool

Part Number: WPY014874

This factory fastener secures appliance components such as panels, brackets, and trim. Replacing a missing or stripped screw restores a tight fit, reduces rattling, and helps keep assemblies aligned for reliable performance.

Fastens appliance parts to maintain structural integrity and alignment
Helps address symptoms like loose or vibrating panels, gaps, or hardware that won't stay tight
Replaces lost, damaged, or corroded fasteners during repairs or reassembly
OEM-matched thread and fit for the specified location

What's included: 1 screw Install notes:

Disconnect power; shut off gas or water supplies before servicing
Replace one screw at a time to preserve alignment of parts
Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
Use the correct driver size/type specified for your model

Do-It-Yourself Stories from Customers like You Loud squealing noise William B. • Rocky Mount , NC • December 17, 2018

First replaced the drum rollers...that wasn't it..took dryer back apart and spun the belt tension wheel by hand (should have done this the first time I took the dryer apart) and it squeaked. so I ordered the full parts: wheel, idler arm, idler spring, arm sleeve, E ring..Put it back together and whoa..no more squealing!! Read more

$5.95

Compare At:: $7.14
You Save:: $1.19

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Heater Assembly

4.9 (23)

By: Whirlpool

Part Number: WP307178

Includes element, thermal fuse, heat shield, heater enclosure and ceramic insulators.

Do-It-Yourself Stories from Customers like You Would not heat Chris A. • Saint Joseph , IL • January 04, 2017

I figured there could only be a couple reasons why the dryer would not heat so I did some research. I read where you could test for continuity on the parts to determine which one was bad. A friend referred me to this site, I looked up the part for my particular model, ordered and replaced the part. It could not have been any easier. I will come back to this site with my future appliance parts needs for sure! Read more

$166.95

Compare At:: $198.67
You Save:: $31.72

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Internal-Bias Thermostat (Dryer)

5.0 (6)

By: Whirlpool

Part Number: WP3387137

This internal-bias thermostat regulates dryer drum temperature by cycling the heat on and off, helping maintain consistent drying performance and protect against overheating.

Controls the cycling temperature of the heating circuit to prevent underheating or overheating
Helps resolve symptoms like no heat, not enough heat, long dry times, or temperature swings
A faulty thermostat may cause overheating that can trip the thermal fuse
Located on the blower housing on many models

What's included: 1 internal-bias thermostat Install notes:

Disconnect power and shut off gas (for gas dryers) before servicing
Access the blower housing; note wire positions and transfer one at a time
Mount the thermostat flush to the housing for proper sensing
After installation, run a test cycle to verify proper heating

This part fixes the following symptoms

Too hot

Do-It-Yourself Stories from Customers like You Thermal fuse blew John P. • Palm Coast , FL • January 02, 2016

Cleaned exhaust duct, but only from the dryer/laundry room side. Replaced thermal fuse. Unit worked for about two loads and thermal fuse blew again. This time I cleaned the exhaust vent on the roof of my 2-story house. It was found to be partially obstructed and I was able to remove a significant amount of lint from it. Also, I researched the problem and followed someone's advice to replace the cycling thermostat together with the thermal fuse if the thermal fuse blows. So far it has been... Read more

$56.40

Compare At:: $67.12
You Save:: $10.72

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Spring Fastener (Retaining Clip)

5.0 (6)

By: Whirlpool

Part Number: WP22001650

This spring fastener applies constant tension to hold a component securely in place inside your appliance, helping prevent looseness, vibration, or gaps. Replacing a fatigued or missing clip restores a tight, reliable fit.

Provides spring tension to clamp and retain a part, seal, or panel
Helps maintain alignment and reduce vibration or rattling
Restores secure attachment when the original clip is bent, stretched, or missing
Symptoms can include a part not staying put, visible looseness, or a clip that's damaged or gone

What's included: 1 spring fastener Install notes:

Disconnect power; turn off water supply if applicable
Use needle-nose pliers or a suitable spring tool; wear gloves and eye protection
Note the original orientation before removal to ensure proper reinstallation
Make sure the mating part or seal is fully seated and the fastener is fully engaged before reassembly

This part fixes the following symptoms

Noisy

Do-It-Yourself Stories from Customers like You Drum guides had worn out Robert S. • North Apollo , PA • October 08, 2014

Replaced them. Read more

$10.43

Compare At:: $12.52
You Save:: $2.09

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Idler Bracket Spacer (Dryer)

4.9 (9)

By: Whirlpool

Part Number: WPW10116756

This idler bracket spacer sits on the idler arm pivot to maintain proper spacing and alignment in the dryer belt path. Replacing a worn spacer can quiet squeaks and help the drum belt track and tension correctly.

Maintains correct spacing of the idler bracket on its pivot to prevent side-to-side play
Helps keep the drive belt aligned on the idler pulley for consistent tension
Replace if cracked, worn, or missing; possible symptoms include squealing/chirping, belt rubbing or fraying, belt coming off, or intermittent drum rotation
Useful check: the idler arm feels loose or wobbly, the spacer may be worn

What's included: 1 idler bracket spacer Install notes:

Disconnect power; turn off gas supply if applicable, and wear gloves
Access the belt and idler assembly; release belt tension and remove the idler bracket
Note the spacer's orientation; install the new spacer on the pivot and re-route the belt correctly
Hand-rotate the drum to ensure smooth belt tracking before reassembly and power-up

Do-It-Yourself Stories from Customers like You The motor burned up after 28 years Robert M. • Paw Paw , MI • December 20, 2016

I replaced the motor and all other moving components along with the felt drum seals.drum glides and drive belt. The wiring instruction is where i had the most problems. Because my wiring had only 4 wires in the harness not 5, and one was a different color then the instructions call out, I believe was because it might have been and older model. the instruction called for a gray wire but mine was white with a blue piggy back wire attached. but after finding a few videos on line i figured that the... Read more

$31.95

Compare At:: $37.70
You Save:: $5.75

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Blower Seal

4.5 (6)

By: Whirlpool

Part Number: WPY312901

This blower seal sits between blower housing components to prevent air leaks, helping direct all exhaust air through the drum and vent. Replacing a worn seal can help restore proper airflow and drying performance. What it does:

Forms an airtight gasket between the blower housing and its cover/duct
Helps maintain correct airflow and temperature balance through the drum and exhaust
Reduces lint and dust escaping into the cabinet
Common failure symptoms: longer dry times, weak vent airflow, whistling or rattling from air leaks

What's included:

1 blower seal

Install notes:

Disconnect power and, for gas dryers, shut off gas before servicing
Access the blower housing; remove the old seal and clean mating surfaces of lint and residue
Position the new seal flat and even; reassemble without pinching or deforming the gasket
After reassembly, verify strong exhaust airflow and check for leaks

Do-It-Yourself Stories from Customers like You Making loud squealing sound when dryer was turned on Michael M. • Plainfield , IL • November 19, 2018

Took the front panel off (the door front), disconnected the connector to the door switch and used a wooden clothespin to bypass the door switch. Turned on the dryer to locate loud squeaking sound and found it was coming from the motor area. When I started to take the blower section apart from the motor, that is when I saw the "blower wheel" slipped off the motor shaft. The blower wheel has a "C" clip retainer and compression ring to keep it snug on the motor shaft (but it was loose). Now I... Read more

$44.95

Compare At:: $53.04
You Save:: $8.09

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Rubber Foot

5.0 (1)

By: Whirlpool

Part Number: WPY314137

The rubber foot is an OEM replacement part for Whirlpool washing machines. This small but essential component fits beneath the leveling legs, providing stability and preventing the appliance from moving or vibrating excessively during operation. It also protects flooring surfaces from potential scratches or damage.

Symptoms of a bad Leveling Leg Pad include:

Increased vibration or noise during the wash or spin cycle
The washing machine wobbling or becoming unsteady
Visible wear, cracks, or damage to the pad

Causes of a failing Leveling Leg Pad can include wear and tear from prolonged use, exposure to moisture, or excessive weight causing deformation. Replacing worn pads helps maintain the appliance's balance and efficiency.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For the leveling leg order W10176519.

Do-It-Yourself Stories from Customers like You Unlevel and shaking moving out of position cracked dryer igniter Steven B. • Grantsville , WV • April 26, 2016

Replaced dried crumbling rubber foot. Cleaned inside and outside of dryer before installing igniter cleared vent hose. Leveled unit installed dryer igniter. Fired it up.Runs Great Now. Read more

$6.95

Compare At:: $8.34
You Save:: $1.39

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Shop With Confidence

Over 15 million customers served!

365-Day Returns

Hassle-free Returns

Fast Delivery

1.7 Days on Average!

Free Tech Support

On all purchased parts!

Genuine Whirlpool part

Motor Retaining Clip

4.7 (3)

By: Whirlpool

Part Number: WPY015825

This motor clip secures a motor to its mounting bracket or housing, keeping it aligned and stable during operation. Replacing a bent, broken, or missing clip helps stop rattling and prevents the motor from shifting. What it does:

Retains the motor on its mounting bracket or frame
Helps maintain alignment to reduce vibration and noise
Prevents movement that can cause rubbing or wire strain
Direct replacement when the original clip is damaged or missing

What's included:

One motor clip

Installation notes:

Disconnect power before servicing; allow all moving parts to stop
Access the motor area, note the clip's orientation, and remove the damaged clip
Seat the motor fully, then install the new clip to secure it to the bracket
Inspect related mounts/grommets and wiring for wear; verify clearances before restoring power

Do-It-Yourself Stories from Customers like You Maytag dryer after 38 years started making loud squealing noises Art W. • Fenton , MO • December 03, 2015

We took the dryer out of the laundry room and took it apart, after reviewing numerous videos at Appliance Parts Pros for direction. Removed front panel, front bulkhead and drum. Then removed exhaust duct, blower assembly and finally motor. (Use large flat blade screw-driver to press very hard down and out on motor mount to remove). After reinstalling all components....motor, new exhaust duct work,front bearings in front bulkhead, and blower assembly, all went back together great. The most... Read more

$14.41

Compare At:: $17.15
You Save:: $2.74

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Screw

By: Whirlpool

Part Number: W10850756

This replacement screw secures appliance panels and components. Use this OEM fastener to swap out stripped, corroded, or missing hardware so assemblies stay tight, aligned, and quiet for reliable day-to-day operation.

Provides secure attachment for panels, brackets, and internal assemblies
Direct replacement for stripped, corroded, or lost screws
Can help with symptoms like vibration, rattling, or loose/misaligned parts
Supports proper fit to reduce gaps or unwanted movement

What's included: One screw Install notes:

Disconnect power; for gas or water appliances, shut off the supply before service
Note hardware order and retain any spacers or clips from the original setup
Start threads by hand to avoid cross-threading; tighten snugly without overtightening
Repair or replace the mating part before installation

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Drum Baffle (Tall)

5.0 (6)

By: Whirlpool

Part Number: 33001004

This drum baffle mounts inside the rotating drum to lift and tumble laundry during each cycle. Replacing a cracked, loose, or missing fin helps prevent snags and restores proper load movement. What it does:

Lifts and turns items as the drum rotates to improve tumbling
Separates garments to reduce tangling and keep loads moving evenly
Helps prevent small items from lying flat against the drum surface
Common symptoms include rattling or thumping, visible cracks, clothes snagging/tearing, and reduced tumbling

What's included:

One tall drum baffle

Install notes:

Disconnect power; shut off gas supply before servicing
Wear cut-resistant gloves; interior cabinet edges can be sharp
Rotate the drum to access mounting points; support the drum while removing/installing the baffle
Tighten fasteners securely; hand-turn the drum to verify clearance before testing

Also known as: drum lifter, drum fin Variant note: This is the tall version; some drums use both tall and short baffles—match to your original.

Do-It-Yourself Stories from Customers like You Baffles had stripped out where attached to drum Robert W. • Sellersburg , IN • November 24, 2015

Replaced with new Drum Baffles Read more

$69.44

Compare At:: $83.33
You Save:: $13.89

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Hex Nut

5.0 (2)

By: Whirlpool

Part Number: WP112432

Size: 10-32 inch.

Do-It-Yourself Stories from Customers like You Broken electrical terminal Alexander S. • Fredericksburg , VA • February 04, 2019

Replaced it with the video listed..Maytag Atlantis dryer was not heating. Checked all components inside dryer, thermostat, coils, etc. All check out ok ......last thing I checked was the terminal. It was burned out. Quick video on your website was awesome! THANK YOU for the service, and the ease of ordering parts. LOVE THIS SITE! Read more

$7.95

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Maytag Lde8704acm Parts

Door Catch Kit

Thermal Fuse

Heating Element Assembly

Screw

Hex Nut

Screw, 1 Piece

Heater Assembly

Internal-Bias Thermostat (Dryer)

Spring Fastener (Retaining Clip)

Idler Bracket Spacer (Dryer)

Blower Seal

Rubber Foot

Motor Retaining Clip

Screw

Drum Baffle (Tall)

Hex Nut