Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Meytag Centennial Model Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Washer Gearcase Oil Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: 285352

Prevents oil leaks from your washer's gearcase and keeps internal components lubricated. Replace if you notice oil pooling under the machine.

Do-It-Yourself Stories from Customers like You Not spinning clothes dry   Marjorie S. • Lansing , NC • December 16, 2017

Replaced clutch assembly, gearcase input shaft seal and motor coupler. When I disassembled the washer I realized the shaft seal on the top of the gearcase was leaking and not the input shaft seal. So had to order more parts before I could finish this job. Altogether I replaced agitator dogs, both seals on the gearcase, the clutch assembly and the motor coupler. Agitator dogs replacement is a very easy job, no tools required, takes less that 5 minutes and made a huge difference with how well... Read more

More
$51.62

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Terminal Block Screw Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279393

Dryer won't power on or has loose power cord connection? This terminal block screw kit secures electrical connections. Easy DIY fix in 15 minutes.

Do-It-Yourself Stories from Customers like You Dryer would not turn on.   Keith K. • Melbourne , FL • May 19, 2020

And after replacing the thermal fuse The dryer turned on. Read more

More
$30.54

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Clutch Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8299642

Fix a washer that won't spin or leaves clothes soaking wet. This clutch assembly engages the transmission for proper spin cycles. DIY repair in 30-60 mins.

Do-It-Yourself Stories from Customers like You Whirlpool direct driver washer leak caused by basket drive shaft wear   Philip L. • Columbia , MD • November 15, 2019

In reality, this turned into a full-on rebuild project - with several parts orders, not just a simple repair. But I have to give credit: The parts listings with pictures on the AppliancePartsPros web site were really useful in figuring out what was going on inside the machine, and what parts I would need. Also: The repair videos were critical for me to be able to ensure I was reassembling everything correctly. Shout out to Simon, who was featured in several of the repair videos. His "gorgeous... Read more

More
$78.65

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

  • Loose or wobbly components within the appliance
  • Panels or parts that are not securely attached
  • Rattling or unusual noises due to loose parts
  • Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Certain buttons were'not working   Brent T. • Easton , MD • November 17, 2014

One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Start Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3398094

Dryer won't start when you press the button? The start switch sends the signal to begin the cycle. Simple 5-10 minute fix with basic tools.

Do-It-Yourself Stories from Customers like You Push to start relay didn't work   Monte W. • Doraville , GA • January 20, 2015

Two screws remove the top. Unplug the wires to the old relay, give it a quarter turn and it's out. A five minute procedure. What took five hours was replacing the dryer duct work that I discovered was mostly crushed on its way from the laundry room, through a couple of walls to the exterior. Read more

More
$61.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Water Level Pressure Switch Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WP353244

Washer overfilling or not filling properly? A damaged pressure switch hose prevents accurate water level sensing. Easy 15-minute DIY fix with video.

Do-It-Yourself Stories from Customers like You My kenmore washer model 11029828801 was agitating during the fill cycle and the tub would only partially fill also at the end of the spin cycle rinse water was spraying in resoaking the clothes   Jay S. • Hammond , IN • February 07, 2017

I read the FAQ section of Appliance Pros parts web site. I found out I needed to replace the temperature control switch, WPW10248240, to correct my problem. This switch also controls the tub filling water level based on air pressure via the attached vinyl tubing. I ordered the switch and the tubing, WP353255, in case mine was no longer any good, and I also ordered the retaining clips for the control cabinet, (2) of WP8312709, because they can be damaged when accessing the controls. My new... Read more

More
$53.21

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Sound Dampening Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP63134

The Sound Dampening Ring is an OEM replacement part for Whirlpool washing machines. Located within the clutch housing, it serves to minimize noise transmission from internal components.

Causes relate to years of absorbing internal impacts fatiguing the damping material. Buildup of grime and detergent residue in its ridges may diminish noise-isolating effectiveness over time.

Symptoms of failure include:

  • Excessive humming or clanking sounds from the transmission area
  • Increased cabinet vibrations felt externally during operation
  • Improper sound insulation leads to a louder overall noise profile

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

Do-It-Yourself Stories from Customers like You Our washer quit spinning   Howard H. • Walton , KS • November 16, 2015

I did some research to diagnose the problem.After watching the videos I determined it needed a clutch kit. I didn't know the first thing about washing machines,but I ordered the parts and with the provided video,it was a piece of cake. Our washer works great now! Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Terminal And Wire Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279318

Includes screws and wire connectors. For the complete terminal block kit use 279320.

This part fixes the following symptoms
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You Loose wire in back caused a short and burned out plug insulator etc   William W. • Pottsboro , TX • February 15, 2019

I ordered the parts through AppliancePartsPros.com. They were delivered the next day. I installed them and the dryer works great. Read more

More
$58.43

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Idler Arm Bolt
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3389420

Secures the idler pulley to maintain proper drum belt tension in your dryer. Replace if worn, loose, or causing squealing noises. Confirm fit with your model.

Do-It-Yourself Stories from Customers like You Loud squealing noise when dryer (Whirlpool) is turned on   Marc P. • Chesterfield , MI • December 31, 2018

Using You Tube How-To Videos. Replaced the drum drive belt and tensioner pulley/arm (including) the spring. Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Natural Gas Orifice
Genuine Whirlpool part
By: Whirlpool
Part Number: WP234826

Converting dryer from propane to natural gas? This orifice regulates gas flow in the burner assembly. Easy DIY fix, typically done in under 1 hour.

Do-It-Yourself Stories from Customers like You Propane to natural gas conversion on range and dryer   Vincent P. • Howell , NJ • October 09, 2014

Confirmed parts needed through online chat with tech and followed video instructions for dryer conversion. Found a video online for range conversion. Replaced orifices for stove top and adjusted oven burner orifices and air shutters and inverted pin in pressure regulator to natural gas position. All went well with no problems, about an hour and a half to gather tools and complete both jobs. Probably could be done faster but I was taking my time. Read more

More
$34.75

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Moisture Sensor
Genuine Whirlpool part
By: Whirlpool
Part Number: 279366

The Moisture Sensor is an OEM part for Whirlpool dryers. This part detects the moisture level in the clothing during the drying cycle, allowing the dryer to adjust the drying time accordingly. 

Causes of a bad moisture sensor can include regular wear and tear, buildup of lint or residue, or physical damage. 

Symptoms of a bad moisture sensor include:

  • Clothes taking longer to dry or coming out still damp
  • The dryer not stopping when clothes are dry
  • The dryer shutting off prematurely
  • Inconsistent drying results

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dampness sensor was broken   George L. • Marquette , MI • March 24, 2014

Viewed the video before I purchased the part. Received the part and put it in. Everything went as planned. Read more

More
$74.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Door Handle
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3405184

The Door Handle is an OEM component for Whirlpool dryers. It provides convenient access to load and unload clothes through the dryer door opening. 

Causes of a bad door handle can include normal wear and tear over extended use. Repeated clutching and releasing of the handle leads to fatigue of rubberized grip areas and loosening of mechanical connections. Accidental falls or impacts when transporting dry loads of clothes could also damage the handle structure or mounting.

Symptoms of a bad dryer door handle include:

  • Increased play, wobble, or looseness when grasped  
  • Detachment or separation from the door assembly
  • Cracks, splitting, or broken areas compromising the grip surface
  • Inability to smoothly open or close the dryer door

Compatible models also include Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore dryers.

Do-It-Yourself Stories from Customers like You Missing oven and broiler handle   Travis W. • Zwolle , LA • October 15, 2014

Separated oven door by removing screws. Inserted handle and secured with clips, and reassembledo door with screws provided. In served broiler handle and snappedal into place. Read more

More
$56.34

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer U-Type Clip Nut
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98234

U-type clip nut slides onto sheet metal panels to create threaded anchor points for screws. Replace if broken, missing, or worn during repairs.

Do-It-Yourself Stories from Customers like You Idler pulley broke.   Bob D. • Oak Lawn , IL • August 18, 2020

Replaced part. But the door was missing a screw and nut, so bought them and replaced them. Read more

More
$11.78

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Lid Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10119828

 

The Washer Lid Screw is an OEM part for Whirlpool washing machines. This 6-32 x .340 screw secures the washer lid to the hinge assembly, ensuring the lid opens and closes smoothly and stays securely in place during operation.

Causes of a bad washer lid screw can include wear and tear from frequent use, corrosion due to exposure to moisture, or damage from over-tightening or mishandling. A compromised screw can lead to issues with the lid's stability and functionality.

Symptoms of a bad washer lid screw include:

  • The washer lid feeling loose or wobbling
  • Difficulty in opening or closing the lid
  • Visible rust or corrosion on the screw
  • The lid not staying securely in place

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Whirlpool cabrio washer cracked lid (model wtw7800xw2)   Mike M. • West Hartford , CT • November 29, 2016

I just replaced the glass lid and broken plastic frame with the all metal one. Call 877 477 7278 for appliancepartspros and order the following Whirlpool parts (prices as of November 2016): 1 lid part number WP8572026 (AP6013408) for $119.81 2 hinges WP8563964 (AP6004844) for $6.17 each 4 screws WPW10119828 (AP6015313) for $1.97 each Total $140.03 plus $8.95 shipping, grand total $148.98 Note that it does not say that this lid will fit model 7800, but the lid will fit this model. The... Read more

More
$7.94

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Support Washer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP348197

This support washer is a flat spacer used within the mechanism to support and separate mating parts, maintaining alignment and smoother movement. Replacing a worn washer helps reduce friction and wear so components operate properly. What it does:

  • Maintains proper spacing and support between adjoining parts
  • Helps prevent metal-to-metal contact, reducing scraping or grinding noises
  • Addresses wobble or excess play when the original washer is worn, deformed, or missing
  • Restores smoother movement and alignment in the assembly
What's included:
  • One support washer
Install notes:
  • Disconnect power and water supply before servicing; for gas combos, also shut off gas
  • Refer to your model's parts diagram for location and orientation
  • Track the order of any shims/spacers during disassembly and reinstall in the same sequence
  • Tighten fasteners to manufacturer guidance to avoid deforming the washer or binding parts

Do-It-Yourself Stories from Customers like You Screaching noise   Linda Z. • Kailua Kona , HI • February 06, 2015

Followed the video- opened the front of the dryer and removed the drum. It was evident that one of the wheels had worn and wasn't turning freely like the other one. The video showed how to remove the roller. Very simple process and now the dryer works just fine. Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Gas Valve Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: 280119

This complete valve system controls gas flow to your dryer's heating element, regulating flame size and heat output. It opens and closes automatically based on temperature settings and safety requirements. Replace if your dryer won't heat, overheats, or you smell gas during operation.

Do-It-Yourself Stories from Customers like You Weak or no burner flame   Michael T. • North Reading , MA • November 16, 2018

Unfortunately my first repair attempt (replacing the Gas Valve Coils) failed so I decided to replace the entire Burner assembly. From a cost/time point of view the Burner assembly is a better value than just buying the Gas Valve seeing as you don't have to disassemble/reassemble most of the existing Burner (to get to the Gas Valve) *and* you get a new Igniter!! The most annoying thing about the repair is accessing the screw that clamps the gas pipe to loosen it :-(... Read more

More
$235.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google