Mfi2665xem Parts

Removed front panel from refrigerator door and replaced the ice chute door seal and also replaced the seal inside the door that seals against the ice maker. Read more

Replacement of parts found on this site- great explanation and pictures as shown! Read more

The new gasket arrived in a box half the size of the gasket so the gasket was folded to fit into the box. I hung the new gasket up for a couple of hours and then just prior to installation used a hair dryer as per included instructions to soften the gasket and minimize minor wrinkles in the gasket. The old gasket came out easily and the new went in easily. A 5 minute job in total. Read more

There are videos on You Tube,. After removing the bottom basket, you remove the entire drawer including the door together with it, by using a screwdriver to depress the white clip on each drawer slide which releases the slide from body of the freezer. Once you pull our the entire drawer, you will need to drill out a rivet to remove the old slide. You will need a rivet gun to attach the new slide. Read more

I ordered the gasket with the model number off the frig. AppliancePartPros.com made it easy to find my part. There was also a "how to" video on the same page. I ordered the part and it got to OH the next day. Following the video guideline it took me 15 minutes to remove the door, strip out the old seal and put in the new one. I will be ordering all my appliance parts from AppliamcePartsPros.com Read more

I replaced the auger motor. You have to remove complete ice maker. Everything is just like help video to do except yoke dispenser. I watched video several times. Yoke will not just tap loose, after 30 minutes of tapping, I was using screwdriver to brace. I used a Dremel tool to cut part of shaft, came off easy then. After that, the repair went great. I have ice, I noticed motor I received was stronger. Parts came on time stated and worked great. I will order again on other repairs. Read more

All I needed was a $5 piece to fix my fridge, but without it I couldn't even us it. I ordered the part after 4:00 pm and had the new part shipped from Kentucky to NJ and had it by 10:00 am the next morning! Amazing! Great company. Read more

Had to take the back cover off. It was very tight to remove the fan that sat in the drip pan but did get it off, was able to apply the same level of cursing and got the new pan installed, installing the drain tube was a breeze. Found the parts price very reasonable. Hoping the Whirlpool redesigned the pan so I won't have to do it ever again. I was surprised at how bad the quality of their original part was. Probably saved myself $150.00 on buying the part and doing it myself Read more

Replaced the actuator pad on the Whirlpool Gold Series, releasing the electronic menu pad to get to the water activator pad was the biggest hurdle. The release tabs are underneath the menu pad and you may feel as if you may break them when releasing them. They did not break but I did hold by breath. Read more

Replaced with parts ordered. Read more

I went to appliancepartspros.com and described the symptoms which led to replacing the capacitor. The part arrived the next day!!! Unfortunately the clicking and warmness remained. I went to the online chat and Mandie recommended the relay which was next in the chain before the dreaded compressor. Once again the part arrived the next morning! I snapped it in and I was back in business, 90 dollars total in the two parts. No service call with the standard "it's the compressor" diagnosis. ... Read more

Water dispenser came down to a trickle and made a lot of noise, I changed the filter but it didnt help and thus the water tank/head assembly needed to be replaced. Replacing the water Tank/head assembly was an easy task, the hardest part is removing the covers and taking care of not breaking the insulation of the water inlet hose. For the not-so-experts like me it is also good to rememebr to have a bucket to collect all the water that comes out after the connection to the solenoid valves is... Read more

Every six months I change my refrigerator filter. I purchased a new filter (UKF8001) and installed it just like I've done many times before. This time, when I first used the water dispenser, I got a horrible sound (kind of like a jack hammer/vibration) followed by very little water flow. I disconnected the new filter and reinstalled the old filter, thinking maybe I got a bad filter. No improvement. I removed the filter and put the bypass cap on and everything returned to normal. Since... Read more

I pulled the old gasket off the door then I used rubbing alcohol to clean the mold along the back of the door and in the insert for the gasket seals . The new gasket fit extremely well and was very easy to put in. I waited 24 hours for the gasket to come back to its normal shape. After putting the gasket in I waited another 24 hours to make sure that I was getting no Icing inside the freezer area. There was no icing so the job is completed. Read more

A tree had fallen across our power lines and the resulting power surge fried the circuit board. The diagnosis was a bit difficult and involved an educated guess based on how the frig was acting. The display was dark unless a button was pressed and the inside light worked but that was all. I had to rule out the compressor as the root cause so I back fed power to the compressor and heard it and the condenser fan fire up. I ordered the board and found the only way I could get it overnight was to... Read more