Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Mgdc300xw Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Dryer Door Catch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3389441

Dryer door won't stay closed or requires tape to shut? The door catch secures your dryer door during operation. Easy 5-30 minute DIY fix with video guide.

This part fixes the following symptoms
  • Door won't close
See more...
Do-It-Yourself Stories from Customers like You Dryer door would not stay closed without being taped shut   Marceen W. • La Canada , CA • June 10, 2016

I chatted with a rep on Appliance Parts Pros and found out which parts I needed for my model of dryer. Ordered the 2 clips that held the door closed. They arrived the next day!! My dryer was very different than the video but we were able to figure out which screws to remove. The old clips popped out and the new ones popped in. Took about 30 minutes because of there being a top and bottom clip to remove and replace and line up the door parts to screw the screws back in. It works great!! I... Read more

More
$9.63

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dryer Gas Valve Coil
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10328463

Dryer won't heat or flame shuts off after seconds? Gas valve coils control gas flow to the burner. Common fix, typically completed in 15-30 minutes.

Do-It-Yourself Stories from Customers like You Flames not staying on   Joe D. • Deerfield , IL • December 23, 2017

It took less then 15 min. Read more

More
$64.70

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Lp Conversion Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 49572A

The LP Conversion Kit is an OEM component for Whirlpool and KitchenAid gas dryers. It allows conversion from natural gas to liquid propane fuel operation. Over time in gas-powered dryers, improper gas/air mixture causes part wear like weakened burner components. This is risky if overlooked but converting to an alternative fuel safely remedies. 

Causes relate to unavoidable deterioration from gas combustion stresses. Conversion using this kit prevents hazardous gas leaks or explosions.

Symptoms involve:

  • Diminished or unsafe heat levels from burners
  • Gas leaks which exacerbate safety risks over time

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Needed to convert gas dryer to propane   Ken B. • Foresthill , CA • June 12, 2014

Ordered the parts from ApplianceParts Pros.com and saved the $100 service call. The fix was easy, complete instructions enclosed. Read more

More
$33.70

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Appliance Touch-Up Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017

Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.

Do-It-Yourself Stories from Customers like You Chipped paint   Thomas S. • Middletown , DE • September 03, 2014

Touch up paint Read more

More
$39.95

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Appliance Spray Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930

Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.

The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.

The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage. 

Symptoms needing for Appliance Spray Paint include:

  • Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
  • A desire to refresh or update the appearance of the appliance without the need for complete replacement
  • Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

 

Do-It-Yourself Stories from Customers like You Leaking diaphragm   Herbert S. • Monroe Township , NJ • January 03, 2015

Replaced It With New One Read more

More
$36.95

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Push Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90296

The Push Clip is an OEM replacement part for Whirlpool dryers. Situated internally near the rear cylinder wall, it firmly secures the drum support roller assembly.

Causes of failure relate to fatigue from years of absorbing drum impacts and associated mechanical stresses. Corrosion penetration if moisture enters the clip mounting area increases operational resistance over time as well.

Symptoms consist of:

  • Uneven drying and weakened tumbling action inside the cylinder
  • Vibration or noise emerging from the rear roller area
  • Premature wear signals stemming from dislocated roller assembly

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Screaching noise   Linda Z. • Kailua Kona , HI • February 06, 2015

Followed the video- opened the front of the dryer and removed the drum. It was evident that one of the wheels had worn and wasn't turning freely like the other one. The video showed how to remove the roller. Very simple process and now the dryer works just fine. Read more

More
$5.95

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dryer Door Catch Bezel
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10529197

This is a decorative bezel that surrounds the door catch on the front of the dryer. It provides a finished appearance around the latch opening where the door engages to stay closed. Replace this bezel if it is cracked, broken, or missing, which can affect the door's ability to latch securely or leave an unfinished look on the dryer front.

Do-It-Yourself Stories from Customers like You Door catch broken to dryer.   Steve L. • Sammamish , WA • December 08, 2023

Ordered part and repaired it. Read more

More
$20.38

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP688805

The Clip is an OEM part for Whirlpool dryers. This part secures the control knob to the dryer’s control panel, ensuring it remains firmly attached and functions correctly. The clip helps provide stability and precise control over the dryer settings.

Causes of a bad clip can include regular wear and tear, accidental damage during use, or stress from frequent adjustments.

Symptoms of a bad clip include:

  • Knob becoming loose or falling off
  • Difficulty turning the knob to adjust settings
  • Knob not staying securely in place
  • Knob wobbling or feeling unstable

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

More
$9.63

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dryer Top Panel Spring Clip Lock
Genuine Whirlpool part
By: Whirlpool
Part Number: WP18776

This small spring clip secures the top panel of the dryer to the cabinet frame. It snaps into place to hold the top firmly shut during operation. Replace this clip if your dryer's top panel feels loose, pops open during use, or won't stay latched when closed.

Do-It-Yourself Stories from Customers like You Clothes dryer drum stopped rotating   Edward J. • Eclectic , AL • February 20, 2015

Located model number and went to Appliance Parts Pros.com to check the repair instructions on belt and motor. Used the suggestions to diagnose problem as a broken belt. I also ordered two top locks to replace the originals that were very brittle plastic that broke when I opened the dryer. Ordered the parts on Presidents Day, and received the parts the next day. The dryer was back in service in 24 hours. Read more

More
$12.95

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dryer Natural Gas Limiter
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694424

If your dryer won't stay lit or shuts off after a few minutes, the gas limiter may be faulty. This regulator controls safe gas flow to the burner.

Do-It-Yourself Stories from Customers like You I needed to convert from lp to natural gas   Mark S. • Raleigh , NC • June 01, 2015

Removed LP Orifice and LP Gas limiter. Orifice was easy, however the gas limiter was the tricky one because I had no instructions to what went where. I could not find anything online as to how to convert from LP to Natural Gas, but you could find several things as to how to convert from Natural to LP. I ended up finding the Dryer schematic on line for the Whirlpool Duet natural gas dryer and was able to figure out what sequence the Spring, regulator and limiter went in. The order I just... Read more

More
$27.37

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488729

This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.

Do-It-Yourself Stories from Customers like You The lint catch was broken   Misti P. • Spokane , WA • January 18, 2019

This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more

More
$7.94

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dryer Door Strike
Genuine Whirlpool part
By: Whirlpool
Part Number: W11429589

Dryer won't start or run? A worn or broken door strike prevents the latch from engaging properly. Quick 5-minute fix restores safe operation.

Do-It-Yourself Stories from Customers like You Door latch broken had to tape the door shut to dry clothes   Lisa M. • Ozark , MO • March 11, 2016

I ordered the male and female door latching parts. Read more

More
$21.46

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dryer Natural Gas Orifice
Genuine Whirlpool part
By: Whirlpool
Part Number: WP234826

Converting dryer from propane to natural gas? This orifice regulates gas flow in the burner assembly. Easy DIY fix, typically done in under 1 hour.

Do-It-Yourself Stories from Customers like You Propane to natural gas conversion on range and dryer   Vincent P. • Howell , NJ • October 09, 2014

Confirmed parts needed through online chat with tech and followed video instructions for dryer conversion. Found a video online for range conversion. Replaced orifices for stove top and adjusted oven burner orifices and air shutters and inverted pin in pressure regulator to natural gas position. All went well with no problems, about an hour and a half to gather tools and complete both jobs. Probably could be done faster but I was taking my time. Read more

More
$34.75

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Moisture Sensor
Genuine Whirlpool part
By: Whirlpool
Part Number: 279366

The Moisture Sensor is an OEM part for Whirlpool dryers. This part detects the moisture level in the clothing during the drying cycle, allowing the dryer to adjust the drying time accordingly. 

Causes of a bad moisture sensor can include regular wear and tear, buildup of lint or residue, or physical damage. 

Symptoms of a bad moisture sensor include:

  • Clothes taking longer to dry or coming out still damp
  • The dryer not stopping when clothes are dry
  • The dryer shutting off prematurely
  • Inconsistent drying results

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dampness sensor was broken   George L. • Marquette , MI • March 24, 2014

Viewed the video before I purchased the part. Received the part and put it in. Everything went as planned. Read more

More
$74.95

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dryer U-Type Clip Nut
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98234

U-type clip nut slides onto sheet metal panels to create threaded anchor points for screws. Replace if broken, missing, or worn during repairs.

Do-It-Yourself Stories from Customers like You Idler pulley broke.   Bob D. • Oak Lawn , IL • August 18, 2020

Replaced part. But the door was missing a screw and nut, so bought them and replaced them. Read more

More
$11.78

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Support Washer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP348197

This support washer is a flat spacer used within the mechanism to support and separate mating parts, maintaining alignment and smoother movement. Replacing a worn washer helps reduce friction and wear so components operate properly. What it does:

  • Maintains proper spacing and support between adjoining parts
  • Helps prevent metal-to-metal contact, reducing scraping or grinding noises
  • Addresses wobble or excess play when the original washer is worn, deformed, or missing
  • Restores smoother movement and alignment in the assembly
What's included:
  • One support washer
Install notes:
  • Disconnect power and water supply before servicing; for gas combos, also shut off gas
  • Refer to your model's parts diagram for location and orientation
  • Track the order of any shims/spacers during disassembly and reinstall in the same sequence
  • Tighten fasteners to manufacturer guidance to avoid deforming the washer or binding parts

Do-It-Yourself Stories from Customers like You Screaching noise   Linda Z. • Kailua Kona , HI • February 06, 2015

Followed the video- opened the front of the dryer and removed the drum. It was evident that one of the wheels had worn and wasn't turning freely like the other one. The video showed how to remove the roller. Very simple process and now the dryer works just fine. Read more

More
$5.95

IN STOCK
Ships Monday Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google