By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement lower spray arm assembly for dishwashers. Installs under the upper dish rack to distribute water during wash cycles. Needed when cracked or broken.
Note: Due to manufacturer changes, the spray arm no longer has the metal tips on the end of the spray arm. Per the manufacturer, it is no longer required.
Purchased new lower spray arm. counterclockwise wise turn to remove and clockwise turn to replace Read more
Fix H2O error codes and water fill issues with this dishwasher pressure sensor. Monitors water level for proper fill cycles. DIY repair in about 1 hour.
First diagnosed the problem by viewing several Youtube videos. Then ordered the part from AppliancePartsPros. After the part arrived I again referenced the best video - several times - and finally made the repair swapping out bad mother board with the new one from AppliancePartsPros. Saved me hundreds. Dishwasher works great, wife happy! All is good. Read more
Replaces broken or worn lower rack carriers and rollers. Installs on both sides of the dishwasher lower rack to restore smooth gliding along tracks.
We ordered one wheel and the case that holds them with great support from The Appliance Parts Pros. Using one original wheel, we snapped the parts together. We used the other three cases as examples and snapped the new case into place. Read more
If your dishwasher won't drain or has standing water, this drain pump removes water at the end of each cycle. Moderate DIY repair, 30-60 minutes.
Removed kick plate , slowly took my time to diagnose area where intermittent noise coming from sump area. Could feel when the circulation pump was running it was quiet. When the drain cycle occurred the noise momentarily began. Ordered a drain pump. After removing the old one I discovered a broken tooth pick in the drain impeller area. Replaced the drain pump anyway. All is quiet!! Read more
Replace your dishwasher's middle spray arm if it's cracked, broken, or worn. Snaps into place in the mid-rack section. Tool-free installation.
Replaced arm. however it would have been a lot faster if the correct part had been sent the first time. I do credit the customer service with their help, which was right away! Read more
The Lower Rack Roller is an OEM replacement part for GE dishwashers. This small but crucial component allows for smooth and effortless movement of the lower dish rack during loading and unloading.
Symptoms of needing to replace the lower rack roller include:
Causes of a faulty lower rack roller can include normal wear and tear over time, exposure to heat or moisture, or physical damage due to impact or mishandling.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.
I was able to find the parts on your website. I was a little worried because there were no photos, but the parts were correct, and it was an easy fix! Read more
Prevents water leaks around the dishwasher door during wash cycles. Replace if you notice water pooling at the bottom. Confirm fit with your model number.
Replaced the floating seal. Easy fix. Read more
The Folding Tine Row Clip is an OEM part for GE dishwashers. It is located on the side of the dishwasher's lower rack and holds the folding tine row securely in position. It ensures that the folding tines, which can be adjusted to accommodate different dish sizes, remain stable during the wash cycle.
Causes of a faulty or damaged folding tine row clip can include regular use, wear and tear, or breakage. These factors can result in issues such as the folding tine row becoming loose or unstable, difficulty in adjusting the tines, or the tines not staying in the desired position.
Symptoms of a bad folding tine row clip may include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replaced the clip I ordered, and it is functioning well. No more collapsing dish rack. Read more
Seals dishwasher tub edges to cabinet, preventing leaks and debris entry. Replace if worn, cracked, or missing for proper seal. Verify fit with model.
Diagnosed problem with UI fail / Personality lost from service manual. Replaced UI board with only one hiccup. (Mixed up personality jumpers) New board requires personality to be set specific to the model number. Board will not function correctly, if al all, if the personality jumpers are not set exactly to your model. Read more
Connects to the middle rack to deliver water through the mid-level spray system. Replace if tabs are broken, assembly won't lock in place, or seals are worn.
Replaced part and fixed the dishwasher. Read more
The Door Latch Strike is an OEM part for GE dishwashers. It ensures the dishwasher door latches securely, allowing the appliance to operate only when the door is properly closed.
Causes of a bad door latch strike can include wear and tear from regular use, damage from slamming the door, or misalignment due to repeated opening and closing.
Symptoms of a bad door latch strike include:
Based on our research, the dishwasher latch was one of the most common causes for our model of dishwasher malfunctioning. We purchased this replacement unit, and thanks to the help provided via videos and diagrams, my wife and I were able to very easily install the new latch. While this replacement did not totally fix our problem, it was part of it. Shipping on the part was very quick, I ordered it on Friday night, and the latch arrived Saturday morning. Read more
Replacement drain hose for dishwashers. Carries wastewater from the unit to your household drain. Needed when original hose is cracked, leaking, or damaged.
Replaced drain line Read more
Secures your dishwasher to the underside of the countertop for stability. Replace this bracket if it's cracked, broken, or missing to prevent movement.
The Set Screw is an OEM part for GE refrigerators. The set screw fits into the handle assembly, ensuring a tight and stable connection to the refrigerator door. This set screw is essential for preventing the door handle from becoming loose or coming off, which can affect the ease of opening and closing the refrigerator door.
Causes of a malfunctioning Set Screw can vary. Normal wear and tear is a common issue, causing the screw to strip or loosen over time. Incorrect installation is another factor.
Symptoms of a bad Set Screw include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Tighten handle Read more
The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.
Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.
Symptoms of a compromised screw placement include:
This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
The replacement of the arm took a total of 3 minutes, all I needed was a nut driver for the easy job, taking the old arm out and putting the new one in, exact replacement , I appreciate you getting the part out as fast as you did. It took an extra day because of the ice storm we had . That was ok. Thanks you . Read more
Replace your dishwasher's fold down tine indexer if rack tines won't lock in place or dishes don't fit properly. Simple rack repair takes 10 minutes.
I purchased new clip pieces and installed them. Read more
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.