Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Houses the water filter and connects to the water supply line. Replace if water leaks, sprays during filter changes, or dispenser flow decreases. Verify model fit.
After changing water filter, flow came to a stop. Would chatter without any water. Confirmed I had flow from the wall supply to the fridge as I broke the water line at the union and let run into a bucket. Then I removed the water filter housing and tube assembly after reconnecting supply. Now the water was only circulating from the wall to the filter housing to the bucket. No flow and chatter was present. I did this to rule out a frozen reservoir. Really simple fix. Was able to remove... Read more
Replacement snack pan for GE refrigerators. Stores small food items in an organized compartment. Replace if cracked, warped, broken, or missing.
My fridge's meat drawer (the drawer with "Deli Fresh" on it) became cracked on the front and needed to be replaced. It took quite a while of looking at this website's diagrams to figure out that what I needed to order is called "Pan ASM Top." Drawer arrived in 2 days, and all I had to do was remove the old drawer and slide in the new one. It's a little tricky -- check the fridge's instruction manual if you need to. Read more
Decorative base grille panel that covers the condenser area at the bottom front of your refrigerator. Replace if cracked, broken, or missing.
Replaced two drawers, one shelf front, and the grille base Read more
If ice won't dispense or the auger spins freely, this lock plate secures the helix to the drive shaft. DIY-friendly repair with video guide included.
I looked for a site that sold replacement parts for my make of GE refrigerator. I found AppliancePartsPros, and was very surprised at how organized it was. By entering the model number of my refrigerator, I was shown a set of (approximately) 8 general parts diagrams for my refrigerator. I chose the ice making/dispensing diagram. I matched the part that shattered (from use) to what was on the diagram. What I didn't know was how to install the part. I saw references by other customer comments to... Read more
Ice dispenser only making crushed ice instead of cubes? This solenoid valve kit fixes the cube/crushed ice selector. Easy DIY repair with video guide.
This was a two and half year issue as different things failed at different times. I would get one part, then another would fail. Ultimately, I got to a point where what failed, I hadn't been ordered the part yet. The seal on the freezer door took three bathing's before it plumped up and un-creased. The directions on the box it is shipped in said to heat the seal up in hot water then cool it down with tap water. I didn't need to do that. It took a lot of massaging of the seal, but... Read more
Replacement drip tray for refrigerator water and ice dispensers. Catches drips and spills at the dispenser. Replace if cracked, broken, or stained.
Watched your videos and easily replaced the solenoid, spring, flapper etc. The only reason it took me as long as it did is I have a GE monogram side-by-side in cabinet refrigerator. It is stainless steel and required me to take off all of the stainless steel skin on the freezer side door. While this was not that difficult it was time-consuming. Read more
Secures the auger shaft in the icemaker assembly. Replace if stripped, cracked, or loose, preventing proper ice transport from bin to dispenser.
Replacement evaporator drip pan for GE refrigerators. Collects defrost water beneath the evaporator. Replace if cracked, rusted, or leaking onto shelves.
Suspected a clogged condensation drain line. Took out all the shelves and drawers, condensation unit is toward the bottom of the frdige on inside, I could see that there was ice build up. I unplugged fridge, placed fan in firdge to speed up the thawing of the built up ice. After ice melted enough, I could get face panels and foam off to see that icing caused a backup in drain line, which led to water sitting in trough pan, rusting the trough pan. Rust then accumulated in the drain line,... Read more
Replacement drawer cover for refrigerator vegetable and deli bins. Replaces cracked, broken, or missing covers. Protects contents and seals drawer.
Our refrigerator takes care of my wife and I, along with our children when they visit, and the grand kids. Over the years, it's seen its fair share of wear and tear. Thankfully, nothing major has happened that hasn't been able to be repaired right here in the home, and by me. Our refrigerator is a GE side-by-side with an ice maker/water dispenser, and has held up well. I've ordered parts for it from AppliancePartsPros.com for all of its repairs, and while GE/Frigidaire have been changing out a... Read more
Fixes freezer or fridge light staying on, or ice dispenser not working when door closes. Simple 5-minute DIY fix with putty knife—video included.
Pop out the old switches with a putty knife pressing down on the tab, grabbed with pliers to pull out, disconnect the wires and connect new switches, pressing back in place. Read more
Spring that controls dispenser arm movement in refrigerators. Installs on the paddle assembly. Replace if broken, detached, or missing to restore arm function.
I order both the paddle and spring and watched a video on how to remove the operating panel to replace them Read more
Illuminates your refrigerator interior. Replace when burned out or flickering. Appliance-rated for durability. Verify wattage and base type match.
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks Read more
Ice dispensing slowly or not at all? A worn ice bucket auger often causes poor dispensing. This helical drive moves cubes to your dispenser or crusher.
Took the ice maker apart and replaced the auger. Used U-Tube video as reference. Read more
Replace your cracked, broken, or missing refrigerator freezer drawer handle. Installs on the front of freezer baskets for convenient access and opening.
I ordered the parts which was easy to order through the internet and received them in a matter of days. I replaced them myself following the video instructions which were easy and simple to understand. Read more
Replace your refrigerator's middle drawer assembly if cracked, broken, or the handle has snapped off. Provides organized storage for produce and deli items.
I shopped around to find the best prices and at the same time, the most reliable live/ via phone assistance in being sure I got exactly the right parts. Your guy was great and the parts were shipped promptly. So there was no "repair!" Simply pulled out the old drawers, and put them in the recycle can! Nw ones slid right into place. I also noticed the new ones had sturdier "stops" at the back edge of the drawers. Suspect this was a common complaint and replacement. Read more
Replaces broken or cracked door closure lever assembly in your refrigerator. Installs at base channel under kickplate to help doors close properly.
Replaced upper and lower thimble's, lever arm, cam closure. Door stop was not the problem, but ordered it and replaced it too. The door of course has to come off, remove the top hinge, and lift it away. Lubricated moving parts with silicone spray. Be sure and put the door back in the open position, so the lever arm and cam closure can properly interact, then close the door. Remove the plastic grate at the bottom to get at the lever arm. Presto. Problem gone. Don't put excessive weight... Read more