Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.
Symptoms of a burnt out refrigerator light bulb include:
This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks Read more
The Handle is an OEM replacement part for GE refrigerators. It is the outer component that allows for opening and closing access to the refrigerator or freezer compartment drawer. Causes of a bad handle can include normal wear over time as handles experience constant friction from opening and closing. Symptoms of a bad handle include:
This GE replacement part is specifically designed to provide a long-lasting replacement. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
My side by side fridge was not defrosting, and then would freeze up, and have to be manually defrosted, ordered new defrost heater, for my fridge, as well as a few other small parts for future service, this company ships OEM parts, very fast, they have a lot of chop, chop, replaced failed defrost element and all is well. thanks a.p. pros. Read more
Replacement drip tray for refrigerator water and ice dispensers. Catches drips and spills at the dispenser. Replace if cracked, broken, or stained.
Watched your videos and easily replaced the solenoid, spring, flapper etc. The only reason it took me as long as it did is I have a GE monogram side-by-side in cabinet refrigerator. It is stainless steel and required me to take off all of the stainless steel skin on the freezer side door. While this was not that difficult it was time-consuming. Read more
Spring that controls dispenser arm movement in refrigerators. Installs on the paddle assembly. Replace if broken, detached, or missing to restore arm function.
I order both the paddle and spring and watched a video on how to remove the operating panel to replace them Read more
If ice won't dispense or the auger spins freely, this lock plate secures the helix to the drive shaft. DIY-friendly repair with video guide included.
I looked for a site that sold replacement parts for my make of GE refrigerator. I found AppliancePartsPros, and was very surprised at how organized it was. By entering the model number of my refrigerator, I was shown a set of (approximately) 8 general parts diagrams for my refrigerator. I chose the ice making/dispensing diagram. I matched the part that shattered (from use) to what was on the diagram. What I didn't know was how to install the part. I saw references by other customer comments to... Read more
Replacement drawer cover for refrigerator vegetable and deli bins. Replaces cracked, broken, or missing covers. Protects contents and seals drawer.
Our refrigerator takes care of my wife and I, along with our children when they visit, and the grand kids. Over the years, it's seen its fair share of wear and tear. Thankfully, nothing major has happened that hasn't been able to be repaired right here in the home, and by me. Our refrigerator is a GE side-by-side with an ice maker/water dispenser, and has held up well. I've ordered parts for it from AppliancePartsPros.com for all of its repairs, and while GE/Frigidaire have been changing out a... Read more
Ice dispenser only making crushed ice instead of cubes? This solenoid valve kit fixes the cube/crushed ice selector. Easy DIY repair with video guide.
This was a two and half year issue as different things failed at different times. I would get one part, then another would fail. Ultimately, I got to a point where what failed, I hadn't been ordered the part yet. The seal on the freezer door took three bathing's before it plumped up and un-creased. The directions on the box it is shipped in said to heat the seal up in hot water then cool it down with tap water. I didn't need to do that. It took a lot of massaging of the seal, but... Read more
The GE Door Light Switch is an OEM Replacement Part that serves as the Freezer Door Fan and Light Switch. The switch is made from metal, wiring, and plastic. It plays an essential role in energy conservation by turning off the light when the refrigerator or freezer door is closed
Over time, the door light switch can wear out or fail due to frequent use, exposure to moisture, or electrical issues. When this happens, the interior light may not function correctly, which can hinder visibility inside the refrigerator.
Symptoms of a bad door light switch may include:
This switch is compatible with select GE and Hotpoint models.
Pop out the old switches with a putty knife pressing down on the tab, grabbed with pliers to pull out, disconnect the wires and connect new switches, pressing back in place. Read more
Replacement snack pan for GE refrigerators. Stores small food items in an organized compartment. Replace if cracked, warped, broken, or missing.
My fridge's meat drawer (the drawer with "Deli Fresh" on it) became cracked on the front and needed to be replaced. It took quite a while of looking at this website's diagrams to figure out that what I needed to order is called "Pan ASM Top." Drawer arrived in 2 days, and all I had to do was remove the old drawer and slide in the new one. It's a little tricky -- check the fridge's instruction manual if you need to. Read more
Secures the auger shaft in the icemaker assembly. Replace if stripped, cracked, or loose, preventing proper ice transport from bin to dispenser.
Ice dispensing slowly or not at all? A worn ice bucket auger often causes poor dispensing. This helical drive moves cubes to your dispenser or crusher.
Took the ice maker apart and replaced the auger. Used U-Tube video as reference. Read more
Replacement evaporator drip pan for GE refrigerators. Collects defrost water beneath the evaporator. Replace if cracked, rusted, or leaking onto shelves.
Suspected a clogged condensation drain line. Took out all the shelves and drawers, condensation unit is toward the bottom of the frdige on inside, I could see that there was ice build up. I unplugged fridge, placed fan in firdge to speed up the thawing of the built up ice. After ice melted enough, I could get face panels and foam off to see that icing caused a backup in drain line, which led to water sitting in trough pan, rusting the trough pan. Rust then accumulated in the drain line,... Read more
The Middle Drawer Assembly is an OEM part for GE refrigerators. This drawer provides additional storage space, typically for fruits, vegetables, or deli items, helping to organize and maximize the refrigerator’s interior space.
Causes of a bad middle drawer assembly can include wear and tear from regular use, cracks or breakage from overloading, or accidental impacts.
Symptoms of a bad middle drawer assembly include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I shopped around to find the best prices and at the same time, the most reliable live/ via phone assistance in being sure I got exactly the right parts. Your guy was great and the parts were shipped promptly. So there was no "repair!" Simply pulled out the old drawers, and put them in the recycle can! Nw ones slid right into place. I also noticed the new ones had sturdier "stops" at the back edge of the drawers. Suspect this was a common complaint and replacement. Read more
Replace your cracked, broken, or missing refrigerator freezer drawer handle. Installs on the front of freezer baskets for convenient access and opening.
I ordered the parts which was easy to order through the internet and received them in a matter of days. I replaced them myself following the video instructions which were easy and simple to understand. Read more
Replacement door bin for side-by-side refrigerators. Mounts inside the door to organize condiments, jars, and beverages. Replace if cracked or broken.
This repair was easy, just missing some door parts and a quick water filter change. Getting the right parts quickly made it all worthwhile! Thanks AppliancePartsPros.com!! Read more
The Fresh Food Lever Assembly is an OEM part for GE refrigerators. It plays a crucial role in the operation of the refrigerator, enabling the smooth adjustment of settings within the fresh food compartment. This lever assembly is responsible for the user's ability to fine-tune the temperature and humidity levels, ensuring that the food stored inside remains fresh and well-preserved. For the same part in white, purchase WR11X10007. Over time, the lever assembly may become worn or damaged due to regular use, accidental impacts, or environmental factors such as extreme temperatures or humidity. Symptoms of a bad Fresh Food Lever Assembly include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replaced upper and lower thimble's, lever arm, cam closure. Door stop was not the problem, but ordered it and replaced it too. The door of course has to come off, remove the top hinge, and lift it away. Lubricated moving parts with silicone spray. Be sure and put the door back in the open position, so the lever arm and cam closure can properly interact, then close the door. Remove the plastic grate at the bottom to get at the lever arm. Presto. Problem gone. Don't put excessive weight... Read more