Your privacy choices: We and our partners use cookies for analytics and ads. Decline all turns them off.
Privacy Policy · Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Medium Haliant Element is an OEM part for GE cooktops. This radiant heating element is located beneath the ceramic cooktop surface and provides a medium-sized heating area for cooking various dishes. This element measures 6 Inches. Causes of a bad haliant element can include electrical issues such as short circuits, wear and tear from regular use, or physical damage from impacts or overheating. Symptoms of a bad medium haliant element include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
We ordered a new elimate, which was shipped the same day. Very good. Read more
Replace your cracked or missing oven light lens to restore safe illumination. This cover protects the bulb and diffuses light for clear visibility while cooking. Confirm fit by model number.
1. Cut the power/unplug 2. Loose 2 screws and take out the lamp holder. 3. There are 2 cables connected to the holder. Unclip them (Don't worry, they're in a different size. You can not attach them to wrong connectors) 4. Clip the cables to the holder (One is slightly smaller and fits a slightly smaller connector) 5. Push back the holder to original place and screw (You'll use existing screws. No replacement in the box) 6. Turn on the power/plug-in 7. Let there be light! Read more
Indicator light that illuminates when burners or oven are active. Replace if it stays on constantly or fails to light. Verify fit with your model number.
Protective label overlay for range control panels. Replaces torn, ripped, or peeling overlays. Adhesive film installs over electronic control board buttons.
This fix went great, no problems, about 15 min of work. Just a heads up: the distribution of the wires on the back of the replacement unit was pretty different from the original part (and the part photo on this website). But the wire tabs were labelled on it, so it only took a few minutes to get the wires lined up right. Works like new now! Read more
Broiler won't heat or stays cold? This range broil element restores high-heat broiling. DIY-friendly repair, typically takes 20 minutes to replace.
I ordered a broiler element, watched the video and replaced the element when it arrived. I turned off the electrical breaker to the stove/oven. I then removed the oven door from the hinges and removed the 1/4" square head screws that secured the element in place,( the video showed phillip head screws ), removed the element wires from the old element. Replaced the element wires to the new element and reattached the element to the oven with the hex head screws. I then put the oven door back on... Read more
Plastic support guide that mounts to the rear of your range storage drawer. Replace if cracked, broken, or missing to keep drawer aligned and gliding smoothly.
My husband fix it in 5 minutes. Thank you for the fast shipping. Read more
Right-side drawer glide supports and guides your range's lower drawer for smooth operation. Replace if broken, cracked, or worn to restore alignment.
Ordered the part overnight, quick replacement. Too easy. Read more
White.
I found the knob I needed by searching online. I received it and it fit perfectly. Read more
Seals oven door to contain heat and maintain cooking temperatures. Replace when frayed, flattened, or leaking heat. Confirm fit with your model number.
Glass was very difficult to replace, but I was able to do it after some trial and error. Replacing the seal was very easy. Read more
Adjustable leveling leg for electric ranges. Installs on the bottom corner of the unit. Replace if broken, cracked, or missing to level your range.
Dismantled the upper part of the stove and removed old part. Had to super glue plastic parts of the underneath part where the touch pad is to be attached to. Put in new touch pad. Worked fantastic. Read more
Black trim piece that installs at the bottom edge of your range oven door. Replace if cracked, rusted, broken, or missing to restore appearance.
I lifted up the door and removed it. Next, I laid out newspaper on the floor. I placed the door on the newspaper upside down. With my socket driver, I removed the bottom door trim. I then used a pocket knife to remove the remaining glass in the top groove. I then slid in the new glass and reinstalled the trim. It took 30 minutes to replace the glass and clean up the glass fragments from the previous door glass. I looked up a video on how to replace it Utube. Personal safety equipment - Safety... Read more
6" element switch
Talked to a representative at your company they said it was probably the infinite switch. I purchased all four switches, replaced all four burner switches. Very easy to do. In less than an hour to replace all four. Read more
Safety bracket that anchors your range to the floor or wall, preventing tip-over. Replace if missing, damaged, or cracked to secure the appliance.
Replaced the water filter head. Read more
ST10-16 X 7/16"
Move stove to unplug, remove rear center panel, indentify the two spade connectors that feed the heating element and remove (unplug) them. Remove two screws that hold the element to the inside rear wall of the stove and remove element. Install new element, plug in the previously removed spade connectors, re-install rear center panel, plug range (power) in, move stove back into place and enjoy. Read more
Replaces cracked, shattered, or heat-damaged inner glass pane in your range oven door. Restores insulation, visibility, and protects from spills.
We were renting a vacation house on the bay and discovered that the oven door inner glass was broken. (There are two glasses inside the glass oven door. Only one was broken.) AppliancePartsPro tech support was fast and efficient on the phone; part arrived via FedEx and on time. The oven door glass replacement was easy. I needed a T-25 screw driver for the screws inside the door. I used a stainless steel scrub pad to clean the existing glass - no scratches. Looks like BRAND NEW! Thank you... Read more
This is a front frame gasket that seals the oven door against the oven cavity to prevent heat from escaping. It is typically made of a flexible, heat-resistant material that fits along the perimeter of the door or frame. Replace this gasket if you notice heat leaking around the oven door, uneven cooking temperatures, or visible wear, cracking, or hardening of the old seal.
It was a simple snap on. I ordered the part and it came in the next day! Read more
Opt-Out Request Honored
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.