Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
If your fridge isn't cooling or has ice buildup around the evaporator fan, this cover assembly may solve it. Includes fan motor and insulation.
I bought the defrost-clip (clip-drain-evap), but once I took the refrigerator apart--the large plastic "back" had frozen to the rest and left the insulation in pieces when I tried to pull it apart. I was able to replace the clip-drain-evap piece with little trouble once the ice had melted, but I was unhappy with the looks of the "back". So I ended up ordering a new "back"(Yassy cover-evap) that included the new insulation as it's made in one unit. Once it arrived, replacing the new "back"... Read more
Stops ice buildup on evaporator coils? Thermal fuse prevents defrost issues when blown. Test for continuity with multimeter. DIY-friendly repair.
I replaced the temperature sensor, the thermo fuse, and the heating element that thaws the evaporator on a cycle to keep the evaporator from freezing up. The most time consuming part of the repair was waiting for the fridge to thaw out so that I could remove the cover. I disconnected the fridge the night before and placed a fan on low with the doors open so that it was thawed out when I awoke. It was easy to remove the evaporator cover once I removed all of the shelves. I took pics as i was... Read more
Ice maker overflowing or not making ice? A faulty water inlet valve often causes these issues. Easy 5-minute DIY repair saves hundreds on service calls.
Verified that the water line had flowing water, check. Removed lower screen and vacuumed and cleaned all dust. Proceeded to test water flow to the valve and beyond the valve. The valve did not allow water to pass through it. Nor would it open or close. Went to Marbeck for confirmation and was sent to your website for the part. Read more
Refrigerator freezing up or not cold enough? The temperature sensor monitors internal temps to prevent freezing. DIY-friendly repair, 30-45 minutes.
Knowing from a previous repair, that there was only 3 parts that could be bad. I decided if I was going to take it apart to change all 3. Not having the proper test equipment, it was cheaper to replace the 3 parts than pay a repair person. Read more
Replaces the handle cap on bottom-mount refrigerator doors. Needed when the original cap is cracked, broken, or missing. Restores secure handle attachment.
Ordered the replacement cap handles (left and right side), and replaced them. Replacing was a breeze, but removing the old broken part was a bit challenging. There was a small metal rod that needed to be slid out for the old part to come out, but it was not easy to do. I used screwdriver and pliers for like 30 minutes to slide out the metal rod. Otherwise, everything else was easy to do. Read more
Replacement axle pin for refrigerator front caster wheels. Installs through wheel assembly to secure rolling casters. Needed when bent, broken, or worn.
Samsung does not make it easy to replace the casters. The shafts holding the casters are crimped at the ends and had to be cut off with little room for any tools. I had to jack up the fridge and I used a hacksaw blade with a handle to cut through the wheel shafts. I didn't want to use a reciprocating saw. I couldn't find a way to crimp the new shafts so I drilled small holes at the ends and used cotter pins to retain the shafts in place.The rear caster had no room to slide the new one in... Read more
Freezer door handle bar assembly for bottom-mount refrigerators. Replaces broken, cracked, or damaged handles. Provides secure grip for opening door.
By installing new handle Read more
Self-tapping screw for dishwashers, dryers, refrigerators, and washers. Replace missing, stripped, or damaged screws for secure panel and component mounting.
The start button had been tricky to use. You had to push it in just a certain way to get the dryer to start. Eventually it was non-responsive. All other controls worked and there was no error code displayed. The repair was to replace the whole control board which cost around $100. Heavy sigh.. Be sure to keep track of all your screws. BTW it was not the thermal fuse. All the online videos say this is the first thing to look for when the dryer will not start. Be sure to check with the person... Read more
Seals your freezer door to prevent air leaks and frost buildup. Replace when worn, cracked, or mildewed to restore efficiency. Confirm fit with model.
So easy. simply pull the old seals / gaskets off the door with your hand then slip the new ones on. They press into a little slot that holds them in place. Easy as legos and half the cost of hiring an appliance tech for such a simple task. 20 minutes including unboxing and clean up. Read more
Fix a refrigerator that resets when the door closes with this door reed switch. Detects door open/closed states for proper operation. DIY-friendly fix.
Unplug all the plugs to the main control board and switched to the new control board. Works perfect thank you. These days you have to do stuff yourself. Everything is getting so expensive. AppliancePartsPros customer service was 100% good. Gave me the right parts thank you again and again. Read more
Lower door shelf bin for bottom-mount refrigerators. Mounts inside the refrigerator door to organize condiments and beverages. Replace if cracked or broken.
Ice maker not dispensing or spilling ice? This ice guide assembly directs ice cubes properly. Easy 5-10 minute DIY fix with basic tools required.
Didn't know what to call the part - got on chat one evening and the wonderful customer service rep knew exactly how to direct me - and even ordered the part for me! It arrives 2 days later - and we fixed our problem! Seems like breaking the plastic arm when the ice sensor starts to fall down happens rather often - 2nd time we have replaced it - but the fix is easy. Wish there was a permanent fix for the ice sensor - I don't think we have the problem solved just yet - but the plastic arm... Read more
Replaces broken or missing spring on French door refrigerator left door flapper assembly. Ensures flapper retracts properly when door closes for tight seal.
Removed refrigerator panel, disconnected light and fan power. Removed fan assembly and replaced motor, grommets and fan attachment spring. Unit had adhesive on spring to help hold the spring. Chatted with customer service and clarified that spring and fan would easily pull off motor shaft. Adhesive probably was extra measure used during original build of the fridge. Noise was due to fan rubbing on housing. New fan position set to avoid any rubbing. Read more
Rubber grommet that secures and cushions the evaporator or condenser fan motor in your refrigerator. Replace if cracked, worn, or missing to stop vibration.
Self-tapping screw for appliance assembly and repairs. Secures handles, bins, shelves, and components. Replace missing or stripped screws during moves or repairs.
Went online to repairclinic.com and it was a simple as typing in the serial # to find the correct parts. Shipping was very quick and the handle was completely repaired within days. Read more
Mounting screw for refrigerator door hinges and internal components. Replace if stripped, missing, or damaged during hinge repair or door removal.
Ordered the pieces from here. Downloaded the user manual. I never work on appliances but I couldn't justify the $200 a service tech would have charged to fix a $35 part. Followed the manual and removed the door. Replaced the broken plastic pieces. BE VERY CAREFUL not to strip the screws. I did and that's another story. Very easy to fix. You will need a second person to help guide the door back onto the frame. Read more