Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement rail assembly for refrigerator vegetable drawers. Installs on the side wall to support drawer gliding. Needed when original is cracked or broken.
Removed the bottom shelf by releasing the 2 clips near the water filter, then lifted the front of the shelf and slid it out. Removed 2 screws from the broken Vegetable Rail and replaced it with the new one. Slid the shelf back into place and locked it down into the clips. Done. Took longer to remove everything from the shelf than it did to fix it. Less than 5 minute repair. Read more
Fix fluctuating temperatures or food freezing in your refrigerator with a new pantry temperature sensor. Common fix for uneven cooling issues.
Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more
Center cap covers the middle hinge on French door refrigerator mullions. Replaces broken, cracked, or missing caps for a clean finished look.
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more
Ice buildup on refrigerator back wall? A faulty defrost heater sheath may be the cause. This repair typically takes 45 minutes with proper defrosting.
Completely defrosted the refrigerator ,took 2days then replaced temp sensor and heater the repair took about 45 minutes so far everything is working fine Read more
Maintains an airtight seal to keep cold air inside your refrigerator. Replace if you notice frost buildup, warm spots, or condensation. Confirm fit with your model number before ordering.
Found AppliancePartsPros.com by googling my model # (RF26XAEBP/XAA) and problem. Was hesitant, but ordered the gasket and not only did it arrive in a couple days, it was the right part, and super easy to install. I used the manual to figure out how to get the freezer drawer and basket out and then realized there were four bolts holding the door on that needed to come out. It was super easy to do with someone helping to hold things level for install and removal. Pull the old seal out, and... Read more
Replacement vegetable drawer rail assembly for bottom-mount refrigerators. Installs in the crisper compartment to support produce drawers. Needed when broken or snapped.
I removed the broken rail saving the 2 Phillips head screws for installation of new drawer rail. Removal of the shelf above the drawers was required and was accomplished by pushing a button on the front of the shelf support. The installation was a snap and took about 10 minutes after removal of food items. The part was the correct one as verified by the model number on the inside of the refrigerator door. Thanks AppliancePartsPros.com! Read more
The Refrigerator Screw-Tapping is an essential component for maintaining your Samsung refrigerator's functionality. This genuine OEM part ensures precise threading, allowing screws to be securely fastened without damaging the surrounding materials. Designed specifically for Samsung refrigerators, it guarantees a perfect fit and reliable performance. Whether you are replacing a damaged screw-tapping or performing a repair, this Refrigerator Screw-Tapping simplifies the process, saving you time and effort. Its high-quality construction provides durability and long-lasting support for your appliance. By choosing the Refrigerator Screw-Tapping , you ensure your refrigerator remains sturdy and functional, enhancing its overall lifespan. This genuine OEM part is easy to install and seamlessly integrates with your existing setup, making it an ideal choice for DIY repairs. Trust in the quality and compatibility of this Samsung part to keep your refrigerator operating smoothly and efficiently.
The start button had been tricky to use. You had to push it in just a certain way to get the dryer to start. Eventually it was non-responsive. All other controls worked and there was no error code displayed. The repair was to replace the whole control board which cost around $100. Heavy sigh.. Be sure to keep track of all your screws. BTW it was not the thermal fuse. All the online videos say this is the first thing to look for when the dryer will not start. Be sure to check with the person... Read more
Creates an airtight seal to maintain proper temperature and keep food fresh. Replace if torn, leaking air, or not sealing properly. Confirm fit with model.
Ordered replacement gasket. Old one was removed bybgrabbing a corner and pulling. It is a simple push in gasket. No disassembly of the door required. No tools other than my fingers needed it install the new gasket. Quick and easy. Read more
The Refrigerator Door Handle Shaft is essential for maintaining the functionality of your Samsung refrigerator. This genuine OEM part ensures a perfect fit and smooth operation, matching the original quality of your appliance. Crafted with durable materials, the door handle shaft provides reliable support for opening and closing your fridge door effortlessly. Its precise design minimizes wear and tear, extending the lifespan of your refrigerator's handle mechanism. Installing the Refrigerator Door Handle Shaft is straightforward, allowing you to restore your fridge's appearance and usability quickly. Compatible with various Samsung refrigerator models, this genuine OEM part guarantees seamless integration and dependable performance. Whether your current handle shaft is broken, loose, or missing, this replacement part offers a practical solution to keep your refrigerator functioning optimally. Enhance your kitchen's efficiency and ensure a secure, functional handle with the Refrigerator Door Handle Shaft .
I looked at the blow up drawing to figure out what parts I might need. I then watched a you tube video to see how to take the handle off. I kind of figured out on my own how to remove the ruined cap handle. It took me a few minutes to figure it out and more time to remove both the handle and the broken part. Turns out I did not need the spring nor the shaft cap handle. Very proud of myself. Saved a huge amount of money. Only problem was that I could only put in one screw as the previous... Read more
Covers the heater assembly on French door refrigerators. Replace if the hinged cover is cracked, broken, or missing. Installs on the center mullion.
Removed broken piece, installed new piece. Read more
Ensures clean, fresh-tasting water and ice. Replace every 6 months or when flow decreases. Confirm fit with your model number before ordering.
Put the right Samsung filter in the fridge. Read more
Replacement door shelf for refrigerator interior storage. Installs on the right door panel. Needed when original shelf is cracked, broken, or missing.
Ordered the parts, they came in very fast, i replaced the broken parts with the new ones. Pretty easy, 5 minutes, my work is done here, opened a cold beer. Read more
The Refrigerator Door Switch is an essential component designed to maintain the optimal performance of your Samsung refrigerator. This genuine OEM part features a reliable switch reed mechanism that accurately detects when the refrigerator door is opened or closed. By ensuring the door is properly sealed, it helps regulate the internal temperature, keeping your food fresh and your appliance running efficiently. The Refrigerator Door Switch is compatible with a wide range of Samsung refrigerator models, making it a versatile choice for your repair needs. Installing this switch is straightforward, allowing you to quickly restore your refrigerator's functionality without hassle. Whether your current switch is malfunctioning, causing the door light to stay on, or affecting the cooling performance, the Refrigerator Door Switch provides a dependable solution. Trust in this genuine OEM part to deliver consistent performance and extend the lifespan of your refrigerator, ensuring a reliable and efficient kitchen appliance for years to come.
Replaced the reed switch Read more
Fix defrost sensor errors and cooling issues in your refrigerator. This temperature sensor regulates defrost cycles. Straightforward repair with basic tools.
Using service manual, obtained from this site, I verified with meter that this was the error. I ordered the defrost sensor. The part arrived the next day. Most of the time to repair was unloading, cleaning, and reloading the refrigerator. Read more
Refrigerator Fan Blade is a crucial component for ensuring your Samsung refrigerator operates efficiently. This genuine OEM part is designed to maintain optimal airflow within your appliance, promoting consistent cooling and preventing temperature fluctuations. By replacing a worn or damaged fan blade with this high-quality part, you can restore your fridgeGÇÖs performance, keeping your food fresh and extending the lifespan of your refrigerator. The fan blade is crafted with precision to ensure a perfect fit for a variety of Samsung refrigerator models, making installation straightforward and hassle-free. Its durable construction resists wear and tear, providing reliable performance even in demanding environments. Additionally, a properly functioning fan helps reduce energy consumption by allowing your refrigerator to run more smoothly. Whether youGÇÖre experiencing unusual noises, inadequate cooling, or need to replace a broken fan blade, the Refrigerator Fan Blade offers a dependable solution. Trust in this genuine OEM part to deliver the quality and performance you expect from your Samsung appliance, enhancing your overall kitchen experience.
Ordered the two motors plus ordered the fan blades since I was afraid one might break during replacement. Changed out without breaking Freezer and both ice makers now working fine Read more
Rubber grommet that secures and cushions the evaporator or condenser fan motor in your refrigerator. Replace if cracked, worn, or missing to stop vibration.
Removed refrigerator panel, disconnected light and fan power. Removed fan assembly and replaced motor, grommets and fan attachment spring. Unit had adhesive on spring to help hold the spring. Chatted with customer service and clarified that spring and fan would easily pull off motor shaft. Adhesive probably was extra measure used during original build of the fridge. Noise was due to fan rubbing on housing. New fan position set to avoid any rubbing. Read more