Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Front caster wheel for refrigerators. Installs at the base to allow smooth rolling and repositioning. Replace if wheel is cracked, broken, or won't roll.
Used the video with the parts and replaced the wheels. The only thing we did wrong was using the front wheel axle instead of the back wheel axle on the back wheels. I will just order two more front wheel axles which are longer than the back axle. Thank you for the video, it made this repair easier. Read more
Upper left door hinge assembly for refrigerators. Secures and supports the upper door. Replace if broken, cracked, or worn to restore door alignment.
Just took off the old part and put new one one Read more
Fridge not cooling or freezer warm? A failed evaporator fan motor stops cold air circulation. This direct-fit motor restores proper airflow and temperature.
I replaced the cooling fan. Read more
Fix a refrigerator that won't dispense water or ice with this dispenser switch. Requires removing the display cover and disconnecting housing connectors.
I replaced the control board and the microswitch. Read more
Replacement axle pin for refrigerator front caster wheels. Installs through wheel assembly to secure rolling casters. Needed when bent, broken, or worn.
Samsung does not make it easy to replace the casters. The shafts holding the casters are crimped at the ends and had to be cut off with little room for any tools. I had to jack up the fridge and I used a hacksaw blade with a handle to cut through the wheel shafts. I didn't want to use a reciprocating saw. I couldn't find a way to crimp the new shafts so I drilled small holes at the ends and used cotter pins to retain the shafts in place.The rear caster had no room to slide the new one in... Read more
Secures the glass panel over your refrigerator's crisper drawers. Replace if cracked, broken, or missing to restore proper shelf support and appearance.
Order a new fixer Read more
Fix a refrigerator with no water or ice dispensing. This water inlet valve controls flow to both the dispenser and icemaker. Moderate DIY repair.
Hooked water line up and has worked fine. I need to return the unopened part. Thank you Read more
Center cap covers the middle hinge on French door refrigerator mullions. Replaces broken, cracked, or missing caps for a clean finished look.
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more
Ice maker only producing crushed ice or freezing up? The auger motor controls ice dispensing. DIY-friendly repair, typically under 1 hour to install.
Entire Samsung Ice Master is modular. Ordered the "ASSY CASE-FAN AUGER MOTO " part and replaced original...Removed ice basket. Removed Cover-Wire Harness by removing screw and unplugged both the modular icemaker and part mentioned above. Icemaker is removed by sliding forward and down. The "ASSY CASE-FAN AUGER MOTO" part at back of ice compartment is held in by plastic clip on bottom of compartment. No screws to remove...just lift up clip and slide forward. Replace parts in reverse order.... Read more
Fixes loud buzzing or grinding noises from your refrigerator's cooling fan. This brushless DC motor restores quiet operation. Moderate DIY repair.
Replaced the fan that circulates the air. Read more
This is a small magnet that works with the reed switch sensor to detect whether the refrigerator door or dispenser drawer is open or closed. It triggers the door ajar alarm and controls the interior light. Replace this magnet if the door ajar alarm sounds constantly even when the door is shut, or if the interior light stays on or off regardless of door position.
Ordered leg. Cover and magnet switch. I did not need magnet switch, it came on the new leg cover. Read more
The Refrigerator Door Reed Switch is an essential component for maintaining the optimal performance of your refrigerator. This genuine OEM part ensures accurate detection of the doorGÇÖs open and closed states, allowing your appliance to operate efficiently. Designed specifically for Samsung refrigerators, the Refrigerator Door Reed Switch guarantees a perfect fit and seamless integration with your existing system. By replacing a faulty or worn-out reed switch with this high-quality part, you can restore your fridgeGÇÖs functionality, preventing issues such as improper cooling or malfunctioning door alarms. The reliable performance of this switch helps maintain the right temperature inside your refrigerator, keeping your food fresh and your appliance running smoothly. Easy to install, the Refrigerator Door Reed Switch offers a straightforward solution for DIY repairs, saving you time and money. Trust in this genuine OEM part to deliver long-lasting durability and dependable operation, ensuring your Samsung refrigerator continues to serve your needs effectively.
Unplug all the plugs to the main control board and switched to the new control board. Works perfect thank you. These days you have to do stuff yourself. Everything is getting so expensive. AppliancePartsPros customer service was 100% good. Gave me the right parts thank you again and again. Read more
Ice not dispensing or weak flow? This dispenser door assembly restores proper ice chute function. Moderate DIY repair with basic tools in 30-45 minutes.
Removed Phillips head screw from bottom side. Next I removed front electronic interface panel, carefully. The plastic clips holding it in place are designed to pop lose on the right side first.then unplug wiring from back of interface panel. Remove two Phillips head screws holding ice/water dispensing unit in place. Carefully remove dispensing unit from leaving multiple wiring plugs connected. Carefully apply pressure to the side of the ice chute door frame to remove the ice chute door/flap.... Read more
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more
The Refrigerator Temperature Sensor Holder is essential for maintaining accurate temperature control in your Samsung refrigerator. This genuine OEM part ensures a secure fit for the temperature sensor, promoting reliable performance and consistent cooling. Designed specifically for Samsung refrigerator models, it integrates seamlessly with your appliance, making installation straightforward and hassle-free. The sturdy construction of the temperature sensor holder guarantees long-lasting durability, protecting your sensor from damage and ensuring it remains in place. By using this genuine OEM part, you can restore the precise temperature regulation of your fridge, preventing issues like improper cooling or temperature fluctuations. This not only helps in keeping your food fresh but also enhances the overall efficiency of your refrigerator. Whether youGÇÖre replacing a worn-out holder or upgrading a damaged component, the Refrigerator Temperature Sensor Holder provides the functionality and reliability you need to keep your Samsung refrigerator operating smoothly.
I replaced the temperature sensor, the thermo fuse, and the heating element that thaws the evaporator on a cycle to keep the evaporator from freezing up. The most time consuming part of the repair was waiting for the fridge to thaw out so that I could remove the cover. I disconnected the fridge the night before and placed a fan on low with the doors open so that it was thawed out when I awoke. It was easy to remove the evaporator cover once I removed all of the shelves. I took pics as i was... Read more
Right-side door bin guard assembly for your refrigerator. Mounts to the door to secure and protect bins. Replace if cracked, broken, or missing.
Easy replacement Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.