Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix a refrigerator that won't dispense water or ice with this dispenser switch. Requires removing the display cover and disconnecting housing connectors.
I replaced the control board and the microswitch. Read more
The Refrigerator Thermal Fuse Assembly is an essential component designed to maintain the safety and efficiency of your refrigerator. This genuine OEM part from Samsung acts as a critical safeguard against overheating by interrupting the power supply if the temperature exceeds safe levels. By ensuring optimal temperature control, the thermal fuse assembly helps protect your appliance and preserve the freshness of your food, enhancing the overall lifespan of your refrigerator. Engineered specifically for Samsung refrigerator models, this thermal fuse assembly guarantees a precise fit and straightforward installation process. Replacing a malfunctioning thermal fuse with this genuine OEM part ensures reliable performance and peace of mind. Whether your refrigerator is experiencing inconsistent cooling or unexpected shutdowns, the Refrigerator Thermal Fuse Assembly provides a dependable solution to restore your appliance's functionality efficiently. Trust in this high-quality component to keep your refrigerator running smoothly and your kitchen operating seamlessly.
I replaced the temperature sensor, the thermo fuse, and the heating element that thaws the evaporator on a cycle to keep the evaporator from freezing up. The most time consuming part of the repair was waiting for the fridge to thaw out so that I could remove the cover. I disconnected the fridge the night before and placed a fan on low with the doors open so that it was thawed out when I awoke. It was easy to remove the evaporator cover once I removed all of the shelves. I took pics as i was... Read more
Front caster wheel for refrigerators. Installs at the base to allow smooth rolling and repositioning. Replace if wheel is cracked, broken, or won't roll.
Used the video with the parts and replaced the wheels. The only thing we did wrong was using the front wheel axle instead of the back wheel axle on the back wheels. I will just order two more front wheel axles which are longer than the back axle. Thank you for the video, it made this repair easier. Read more
Secures the glass panel over your refrigerator's crisper drawers. Replace if cracked, broken, or missing to restore proper shelf support and appearance.
Order a new fixer Read more
Plastic end cap that covers the freezer door handle on bottom-mount refrigerators. Replace when cracked, broken, or missing for a complete look.
The Samsung french door freezer has a handle that has plastic pivot plates that help "push" the door open during its first inch or so of travel. One morning, the handle pulled off taking portions of both pivot plates with it! The parts from AppliancePros arrived very quickly, and the repair required re-positioning the mounting holes, even thought the replacement parts looked identical to what was left of the pivot plates. Okay, that‘s not AppliancePros fault in any way whatsoever; this happens... Read more
Replacement axle pin for refrigerator front caster wheels. Installs through wheel assembly to secure rolling casters. Needed when bent, broken, or worn.
Samsung does not make it easy to replace the casters. The shafts holding the casters are crimped at the ends and had to be cut off with little room for any tools. I had to jack up the fridge and I used a hacksaw blade with a handle to cut through the wheel shafts. I didn't want to use a reciprocating saw. I couldn't find a way to crimp the new shafts so I drilled small holes at the ends and used cotter pins to retain the shafts in place.The rear caster had no room to slide the new one in... Read more
Replacement cover assembly that sits above vegetable crisper drawers. Needed when original is cracked, chipped, sagging, or broken. Direct fit replacement.
Removed the old shelf and replaced it with the new one. Less than two minutes. Read more
Spring component that provides tension for the freezer door handle mechanism. Replace if spring is broken, missing, or no longer holding proper tension.
I looked at the blow up drawing to figure out what parts I might need. I then watched a you tube video to see how to take the handle off. I kind of figured out on my own how to remove the ruined cap handle. It took me a few minutes to figure it out and more time to remove both the handle and the broken part. Turns out I did not need the spring nor the shaft cap handle. Very proud of myself. Saved a huge amount of money. Only problem was that I could only put in one screw as the previous... Read more
Fridge not cooling or freezing up? The temperature sensor monitors temps to keep food fresh. Typical DIY repair takes about 1 hour with basic tools.
Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more
Replaces cracked, frozen, or leaking water reservoir in bottom-mount refrigerators. Installs behind crisper drawers. Includes dual tanks and connector.
Ordered tank and heater, installed, so far so good. Thanks for the speedy order Roman Read more
Center cap covers the middle hinge on French door refrigerator mullions. Replaces broken, cracked, or missing caps for a clean finished look.
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more
Fix water pooling under crisper drawers. This evaporator shield with drain pan stops leaks caused by corrosion. Moderate DIY repair with video guide.
Repair required removing all of the interior drawers & shelves and the interior back panel. There you will find the defrost heater. Behind the defrost heater is a metal plate as well as one on the back of the front interior cover. Both were corroded and in need of replacement. I ordered Samsung part #’s AP5577767, plate drain & AP5587916, evaporator plate and replaced both. Read more
Replacement rail assembly for refrigerator vegetable drawers. Installs on the side wall to support drawer gliding. Needed when original is cracked or broken.
Removed the bottom shelf by releasing the 2 clips near the water filter, then lifted the front of the shelf and slid it out. Removed 2 screws from the broken Vegetable Rail and replaced it with the new one. Slid the shelf back into place and locked it down into the clips. Done. Took longer to remove everything from the shelf than it did to fix it. Less than 5 minute repair. Read more
Replacement vegetable drawer assembly for your refrigerator's crisper compartment. Needed when the original drawer is cracked, broken, or damaged.
Ordered new drawer which the picture made the face of the drawer appear gray. Called an operator she said it appears all drawers are fac tory gray face border. Ordered two day shipping and was pleasantly surprised when drawer arrived on time with white face border and matched original happy happy happy. Read more
The Refrigerator Dispenser Cover Assembly is designed to seamlessly replace your existing dispenser cover, ensuring your Samsung refrigerator maintains its sleek appearance and functionality. This genuine OEM part is crafted with high-quality materials, providing durability and a perfect fit for a range of Samsung refrigerator models. Installing this cover assembly not only restores the original look of your appliance but also protects the dispenser area from spills and debris, making maintenance easier. The easy installation process allows you to quickly upgrade your refrigerator without the need for professional assistance. By choosing the Refrigerator Dispenser Cover Assembly, you ensure compatibility and reliability, enhancing the overall user experience of your Samsung refrigerator. Whether your original cover is cracked, damaged, or missing, this genuine OEM part offers a dependable solution to keep your refrigerator looking and working like new. Trust in the quality and precision of this replacement part to deliver long-lasting performance and maintain the efficiency of your appliance.
Simply removed one screw pulled dispenser control panel straight forward disengaged electrical connection and reassembled. Literally was a 3 minute job. Read more
Fix fluctuating temperatures or food freezing in your refrigerator with a new pantry temperature sensor. Common fix for uneven cooling issues.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.