Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Sawx650jqo Parts

Best Seller
Spin Tube Thrust Washer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP63292

The Spin Tube Thrust Washer is an OEM component for Whirlpool washing machines. It is a washer that fits around the agitator shaft and helps create a seal between the agitator shaft and the aluminum tub. This washer allows the agitator to spin freely during the wash and spin cycles without causing excessive vibration or noise. 

Symptoms of a bad spin tube thrust washer include:

  • Noises like banging or clunking coming from the agitator area
  • Shaking or vibrating of the washer tub during spinning 

Causes of a bad thrust washer include normal wear and tear after extended use. Exposure to extended periods of unbalanced loads can also put excessive strain on the washer components and lead to premature failure of the thrust washer seal.

This replacement part is also compatible with select Kenmore, Maytag, KitchenAid, and Jenn-Air models.

Do-It-Yourself Stories from Customers like You No spin every thing else worked made high speed ticking noise   Anthony D. • Follansbee , WV • May 12, 2015

First I looked at the many you tube vids, and there are many. appliance parts pros pretty much shows you how to deal with the parts. I changed the brake shoes and the clutch assembly which also comes with the driver cam. I also changed the metal brake operating cam. I think that brake lockup or improper brake release was the problem that broke the plastic cam driver. This was the broken plastic part making all the ticking noise. I first changed the coupling on the motor but that wasn't bad. in... Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Suspension Spring Retainer
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10145155

Secures suspension springs to the washer tub assembly. Replace if cracked, worn, or missing to prevent tub instability during wash and spin cycles.

Do-It-Yourself Stories from Customers like You Tub out of alignment violent wobbling during spin cycle   Stephani W. • Folsom , CA • January 29, 2018

When I removed the cabinet, all of the springs appeared in tact, I had already replaced the counter balance spring so I knew that was not the issue. None of the suspension springs or brackets were broken but they did look worn/rusty so I replaced all of the brackets (2 in front and 1 large in back), all of the suspension spring retainers, and all of the suspension springs and it fixed the issue! I plan to also replace the Self leveling leg spring which is an easy fix since it's on the back of... Read more

More
$6.41

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Appliance Spray Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930

Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.

The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.

The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage. 

Symptoms needing for Appliance Spray Paint include:

  • Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
  • A desire to refresh or update the appearance of the appliance without the need for complete replacement
  • Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

 

Do-It-Yourself Stories from Customers like You Leaking diaphragm   Herbert S. • Monroe Township , NJ • January 03, 2015

Replaced It With New One Read more

More
$36.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Spin Tube Bearing
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546462

Supports the spin basket and reduces friction during operation. Replace if you hear grinding, thumping, or squealing noises during spin cycle. Confirm fit.

Do-It-Yourself Stories from Customers like You Leak (found to be tub seal) and extreme spin vibration.   Paul H. • Lakewood , CA • June 26, 2021

First, DO NOT call Sears for parts, their call center knows nothing about the product. App-Pros are the best for help and the right parts. I figured to repair, replace all seals and any item that shows need to and all items that have to do with the spin that may be bad. Repair videos great help. I will start from the "bottom" up, the repairs were not done in this order, just a list of what I did and notes. Replaced-- motor drive coupling, (checked out transmission ok), thrust washer,... Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Retainer Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546127

The Retainer Clip is an OEM replacement part for Whirlpool direct drive washing machines.

Causes of a bad retainer clip can include wear and fatigue from continuous vibration over many wash cycles. Cracks or breaks in the plastic material may develop as well.

Symptoms of a bad Retainer Clip include:

  • Water leaks detected around the pump area inside machine cabinet
  • Loosening of hoses or tubes interrupting proper drainage flow
  • Potential pump component detachment from disconnected lines
  • Damage to neighboring components submerged by leaked water

The OEM Whirlpool part is also compatible with Maytag, Jenn-Air, and select Kenmore models.

Do-It-Yourself Stories from Customers like You Water leak   Steven K. • New City , NY • August 10, 2018

Took off cover, installed new parts. Read more

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Agitator Cap
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3355758

The Agitator Cap is an OEM part for Whirlpool washing machines. It fits on top of the agitator and helps secure the agitator components, ensuring proper functioning during the wash cycle. This cap is essential for maintaining the agitator's efficiency and preventing water from entering the agitator assembly.

Causes of a bad agitator cap can include wear and tear from regular use, cracking or damage from impacts, or degradation due to exposure to detergents and water over time.

Symptoms of a bad agitator cap include:

  • The cap being loose or not fitting properly
  • Water leaking into the agitator assembly
  • Excessive noise during the wash cycle
  • Reduced agitation performance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Broken upper section of our Whirlpool agitator also known as a filter   David I. • Heathsville , VA • September 04, 2019

Simply lift up the old filter and cap and discard it. The new assembly simply pushes down and on to the agitator base. It stays in place by clicking over a raised perimeter rib on the base. This is the easiest repair (short of screwing in a light bulb) that one could do. The hardest part was to identify which parts I needed to purchase. The parts associate at Appliance Pros was terrific in tracking down what was needed. Read more

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Tub Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: W11095997

Seals the washer shaft to prevent water leaks from the tub during wash cycles. Replace if you notice water pooling under your machine. Verify fit.

Do-It-Yourself Stories from Customers like You Agitator would not work   David W. • Murfreesboro , TN • November 19, 2014

Used the parts and youtube video from your company. Read more

More
$23.61

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Bleach Dispenser Cup
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3362952

Cracked or broken bleach dispenser cup causing leaks or improper dispensing? This replacement cup restores proper bleach delivery. Easy 10-minute fix.

Do-It-Yourself Stories from Customers like You Worn out contact in the timer not allowing it to spin/   Norman W. • Bismarck , ND • May 18, 2020

The washer would work fine except it wouldn't spin unless you opened the lid and waited a split second for it to stop. You would hear a bang, then when you closed the lid, it would spin. Since it made that bang noise, I thought the transmission was going bad, so I replaced that. Nope, still the same. So, after a little more research, I found out that the motor has to come to a complete stop for the transmission to go into spin mode. After pulling out the timer and inspecting it, I noticed... Read more

More
$8.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Hose Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285655

The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.

Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

  • Water leaks around the hose connection points
  • The hose slipping off the fitting
  • Visible rust or wear on the clamp
  • Difficulty in tightening the clamp to secure the hose

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Syphonbreak was leaking   James O. • Bryant , AL • September 04, 2015

We ordered parts from appliance parts pros and I fixed it. Read more

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Cover Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3349985

Prevents water leaks between washer cover and tub during wash cycles. Replace if leaking or water escapes during washing. Verify fit with model number.

Do-It-Yourself Stories from Customers like You Washer would not spin   Joseph S. • La Grange , KY • February 14, 2016

Disassembled and confirmed the clutch was bad. Also noticed a slight leak from the transmission shaft seal. Ordered replacement clutch, seal and oil from appliancepartspros.com. The parts arrived very quickly and exactly as ordered. Their repair videos were very accurate and made the job easy. I accomplished a quality repair at a reasonable cost. My thanks to the folks at appliancepartspros.com for making it possible! Read more

More
$20.38

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Lid Strike
Genuine Whirlpool part
By: Whirlpool
Part Number: WP358684

Washer won't spin or drain? A broken lid strike prevents the lid switch from detecting when the lid is closed. Easy 10-minute DIY fix with basic tools.

This part fixes the following symptoms
  • Will not agitate
  • Will not drain
  • Won't start
  • Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You The spin cycle would not initiate pump to drain tub   Douglas B. • Skull Valley , AZ • January 21, 2017

Ordered new lid switch and plunger. Watched help videos and installed new parts, Washer works like new. Read more

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488729

This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.

Do-It-Yourself Stories from Customers like You The lint catch was broken   Misti P. • Spokane , WA • January 18, 2019

This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more

More
$7.94

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Liquid Fabric Softener Dispenser
Genuine Whirlpool part
By: Whirlpool
Part Number: 63580

The Liquid Fabric Softener Dispenser is an OEM part for Whirlpool washing machines. It is designed to dispense fabric softener at the appropriate time during the wash cycle, ensuring that your laundry comes out soft and fresh. This liquid fabric softener dispenser fits most 1984 and newer 24 and 27 inch washing machines. This part inserts into the top of the agitator. Laundry bag AP4354945 is also recommended to prevent damage to delicates clothing.

Causes of a bad fabric softener dispenser can include clogs from fabric softener residue, wear and tear from regular use, or mechanical failure of the dispenser mechanism. If the dispenser is not functioning correctly, it can lead to ineffective softener distribution.

Symptoms of a bad fabric softener dispenser include:

  • Fabric softener not dispensing during the cycle
  • Residue buildup in the dispenser compartment
  • Leaks or drips from the dispenser
  • Fabric softener remaining in the dispenser after the cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Washing machine didn't have fabric softener dispenser and no option for adding fabric softener fluid   Victor O. • El Paso , TX • May 05, 2014

Purchased a fabric softener dispenser from appliance parts pros removed cap from agitator and replace with the new fabric softener dispenser and problem solved. Read more

More
$23.61

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Clutch Retaining Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10080230

Washer won't spin or leaves clothes wet? This clutch retaining clip secures the clutch assembly for proper transmission engagement. DIY repair.

Do-It-Yourself Stories from Customers like You Washer would not agitate   Robert C. • Newark , DE • September 25, 2014

Took washer apart to find a bad Neutral Drain Transmission. Ordered part from here and fixed with no problems. Read more

More
$7.78

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Neutral Asy Pack
Genuine Whirlpool part
By: Whirlpool
Part Number: 388253A

The Neutral Drain Kit is an OEM part for Whirlpool washing machines. This kit facilitates the neutral drain function, which allows the washer to drain water without spinning the tub, ensuring efficient water removal before the spin cycle begins.

Causes of a bad neutral drain kit can include wear and tear over time, mechanical failure of the components, or damage due to improper installation or handling. A faulty neutral drain kit can lead to draining issues, affecting the overall performance of the washing machine.

Symptoms of a bad neutral drain kit include:

  • Washer not draining properly
  • Extended or incomplete drain cycles
  • Water remaining in the tub after the drain cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Teeth stripped from gear in transmission   Robert G. • Wentzville , MO • June 17, 2015

The parts I purchased from Appliance Parts Pro fit perfectly and were reasonably priced. I received them the next day, which made the Wife (and me) very happy. Although Appliance Parts Pro did not have a repair video for this, I was able to find one online and the machine is washing like new again. The website is well laid out and easy to find what your looking for. Between the available parts and the videos they provide, anyone who is reasonably handy should be able to repair their machine as... Read more

More
$53.72

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Rear Leveling Leg
Genuine Whirlpool part
By: Whirlpool
Part Number: 285244

The Rear Leveling Leg is an OEM part for Whirlpool washing machines. It provides support and adjustment capability to compensate for uneven surfaces or flooring. By adjusting the height of the rear leveling leg, you can achieve a balanced and stable position for your appliance.

Causes of a faulty or damaged rear leveling leg can include regular use, accidental impact, or wear and tear. A damaged leveling leg can lead to an unstable appliance, increased vibrations, or difficulty in maintaining a level position.

Symptoms of a bad rear leveling leg may include:

  • Appliance wobbling or rocking during operation
  • Uneven distribution of weight
  • Difficulty in aligning the appliance with adjacent units or countertops

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Washing machine shook terribly   Edward L. • Temecula , CA • August 09, 2015

Replace front legs and rear legs took about 30 minutes. Made sure rear legs had lithium grease applied ran a load of wash very little Vibration nothing compared to before legs were installed and balanced the machine with a level. Read more

More
$25.76

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google