We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Dishwasher won't drain or shows E24/E25 error? The drain pump removes water after wash cycles. Moderate DIY repair with video guide available.
Water was left in the bottom of the dishwasher after each time we ran it and the dishes were no longer getting clean. Also, there was always soap left in the dispenser. I took the DW completely apart and determined the water was not being forced out of the discharge tube and was merely draining via gravity. I ordered a replacement drain pump and removed the entire motor/pump assembly from under the DW. Once the pump was replaced and the DW was put back together, the water now was forced out... Read more
Most orders arrive by Wednesday, November 25
Supplies water from household plumbing to your dishwasher. Replace if cracked, leaking, damaged by rodents, or stripped threads at connection points.
Leak was slow but becoming gradually worse. Pulled dishwasher out from under counter then visually inspected sump while it ran. As soon as the water got very hot, I could see the sump leaking where it meets the stainless pan. Searched for the correct sump gasket without success. Turns out that the gasket is built into the sump for this model. The built-in gasket is very narrow (under-engineered IMHO which is probably why it developed a leak). Thanks to Simon's excellent videos at... Read more
Replace your dishwasher's right door hinge lever if bent, broken, or causing door misalignment. Installs on the lower right side for proper door support.
It was surprisingly easy to remove the door, remove the hinges, then install the new hinges. On my model, the right hinge has a wiring harness attached, but I just removed from the old hinge and attached it to the new one. You need to be careful about moving the door too far the the cabinet because of attached wires. I needed a torx bit for the screws and a flathead screwdriver for prying the hinges off their pins. Also, a needle-nose pliers helped for pinching the wiring harness clip to... Read more
Water backing up into your dishwasher tub after draining? The check valve prevents dirty drain water from flowing back in. Moderate DIY repair.
It finally gave E15 code, then after drying out the E15 code came back within 5 minutes of running. I dried out the base then I ran the dishwasher and observed water coming down the overflow chute after running only 5 minutes.There is a water inlet (clear water chamber on the side of the machine). It had some gunk inside that was stopping a black float shut-off from moving. I replaced the water inlet chamber. I also suspected the non return valve (also called a check valve). From the parts... Read more
Dishwasher leaking from the bottom or won't drain? The sump assembly collects and channels water to the pump. Moderate DIY repair with video guide.
E15 or E16 error code? The water level float detects leaks in the base pan. Simple DIY fix with video guide—typically takes 30-45 minutes to replace.
Dishes not getting clean in the middle rack? This middle spray arm restores water coverage. Simple snap-in replacement takes about 3 minutes to install.
I ordered and replaced strategic parts for the dishwasher through your company. The correct parts arrived very quickly and we had much cleaner dishes the next day. Read more
Replacement left door hinge lever for dishwashers. Installs at the door hinge assembly. Replace if bent, cracked, or damaged from door misalignment.
Originally had a repair done by a local, highly rated, repair service. One year later, door flopped open again. This time I ordered parts from AppliancePartsPro which arrive in two days. Repair was accomplished in one hour, after watching their YouTube video. Parts used by original repair service were not Bosch, were totally inferior. Thank you AppliancePartsPro. Read more
Replacement drain hose for dishwashers. Carries wastewater from the tub to household plumbing. Replace if cracked, leaking, or develops pinholes.
This was a dishwasher swap out. I first turned the water off to the inlet hose of the dishwasher from underneath the sink. Removed the inlet water hose from sink to dishwasher. (use wrench or adjustable wrench) Then removed the screws securing old dishwasher from the cabinetry. I then pulled out the dishwasher from the cabinetry hole it was in. I unplugged the power cord from the wall of the old dishwasher. Then Ii removed the other end of inlet hose still attached to old DW (braided stainless... Read more
This is a lid that covers the drain pump housing inside the dishwasher sump area. It seals the drain pump to ensure proper water flow during the drain cycle. Replace this lid if it is cracked, warped, or missing, which can cause water leaks, poor draining, or unusual noises during operation.
After fighting, attempting to clean filer a few times, we gave up and ordered one, one with a lid for the drain pump. Dishwasher is running great now. Easy to order. Got the correct part first time. Great Experience! Read more
The Sump to Water Inlet Hose is an OEM replacement part for Bosch dishwashers. This hose provides a pathway connecting the dishwasher's sump and water inlet valve. It allows the sump to fill with water during different dishwashing cycles, facilitating key functions like rinsing, spraying cycles, and final rinses. Proper connection between these components via this hose is required for the dishwasher to operate efficiently.
Causes of a faulty sump to water inlet hose include cracking, leaking, or kinking over repeated use and cycles. Hoses can become damaged due to pinching in the dishwasher or exposure to high water pressures over time.
Symptoms of a bad sump to water inlet hose include:
This replacement part is also compatible with some Thermador, Gaggenau, and Kenmore models.
The Seal is an OEM part for Bosch dishwashers. This part is designed to ensure a tight and secure seal for the zeolite container, which is used in some Bosch dishwashers for enhanced drying performance. The zeolite container holds a mineral that absorbs moisture and releases heat, aiding in the drying process. The seal prevents leaks and ensures that the container functions efficiently.
Causes of a bad Seal can include wear and tear from regular use, exposure to high temperatures and moisture, and physical damage from improper handling or installation.
Symptoms of a bad Seal include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Kept getting water in the water pan of my Bosch 800 dishwasher. Appliance company wanted $1000 to change out an entire pump system. I determined the leak was from this nut and seal. Replaced and no more water! Read more
This is a combined circulation pump and heating element assembly that pumps water through the spray arms and heats it during the wash and rinse cycles. It ensures water reaches the proper temperature for effective cleaning and drying. Replace this part if the dishwasher is not cleaning dishes properly, water is not circulating, dishes come out cold, or if diagnostic codes indicate a pump or heater failure.
I began looking for parts on your website and the initial google search took me to a bosh water heater. I was a little unsure about that particular part and so I wrote to your "ask a professional" section. He replied to me within about 24 hours. The part that Google directed me to was not correct and the technition from your website helped me find the right part very quickly. Shipping was extrememly quick and the price couldn't be beaten anywhere on-line. The heat pump was a little time... Read more
Flexible plastic tube that carries used wash water from the dishwasher sump to household drain plumbing. Replace if cracked, pinched, or leaking.
Replaced the sump drain hose. Read more
Replacement base panel for dishwashers. Installs at the bottom front to cover internal components. Replace if cracked, bent, missing, or damaged.
Reverse engineered. Read more
This cutlery drawer installs in the top rack of your dishwasher to hold silverware and small utensils. Replace if cracked, broken, or missing compartments.
We moved into a house and the dishwasher was missing its top drawer and an end cap for the handle was broken. After doing a little bit of research, your company had the parts in stock and at a reasonable price. Even better, they arrived quickly. The cutlery drawer was easy to replace. The handle end cap took about 20 minutes to replace - I helped my wife do it. We probably saved ourselves several hundred dollars in labor and markup fees. Best of all, we had the satisfaction of being able to do... Read more