Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Water Valve Assembly is an OEM part for Bosch dishwashers. This assembly controls the flow of water into the dishwasher, ensuring that the correct amount of water is used during the wash cycle for optimal cleaning performance.
Causes of a bad water valve assembly can include mineral deposits from hard water, wear and tear over time, or electrical issues that prevent the valve from opening or closing properly. These issues can lead to improper water flow or leaks.
Symptoms of a bad water valve assembly include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
This was not my first rodeo have repaired our appliances and those of our daughters for years, have ordered parts from this site several times. We had a cold spell in Texas, as you may have heard. We weathered it okay but left the dishwasher closed on one of the colder nights, woke up to water on the floor in the kitchen. Turned off the supply line, shut off the dishwasher power, bailed out the bottom, and mopped up. Had a fair idea of what the cause was, checked a few websites, watched some... Read more
The Handle Endcap is an OEM part for Bosch dishwashers. This component is designed to secure the end of the dishwasher handle, providing a finished look and ensuring the handle remains firmly attached. It plays a crucial role in the overall functionality and aesthetics of the dishwasher door.
You should replace this handle endcap if it becomes damaged or broken. Common causes of a bad handle endcap include regular wear and tear, accidental impact, or frequent use that leads to stress on the component.
Symptoms of a bad handle endcap include:
This part is stainless but also comes in different colors:
White: 00615350
Black: 00615353
Bisque: 00418631
I easily found the replacement part on the Appliance Parts Pros website and ordered (2), one for each end of the handle and yes it is the same part for either side. They showed up a few days later. I had seen a video of how to expose the handle screws behinf the door face. I backed out the appropriate (6) Torx screws and the front of the dishwasher door came right off exposing the handle screws. (Note: This model of dishwasher is well engineered as the door face is completely separated from the... Read more
The Tine Row Holder is an OEM part for Bosch dishwashers. It is designed to securely hold the tines in place within the dishwasher rack, allowing for optimal organization and stability of dishes during the wash cycle.
You should replace this tine row holder if it becomes damaged or fails to secure the tines properly. Causes of a bad tine row holder can include breakage due to heavy loads, wear and tear from frequent use, or damage from accidental impacts.
Symptoms of a bad tine row holder include:
I only needed a flat head screwdriver to remove the clips holding the parts in. It took all of 10 minutes and the dish washer is running great now. Read more
The Sump Assembly is an OEM part for Bosch dishwashers. It collects and channels water to the pump, ensuring proper circulation and drainage during the wash cycle.
Over time, the sump assembly can become clogged with debris, suffer damage, or wear out, leading to compromised performance. Causes of a bad sump assembly include buildup of food particles and mineral deposits, physical damage from sharp objects, or wear from continuous use.
Symptoms of a bad sump assembly include:
Leak was slow but becoming gradually worse. Pulled dishwasher out from under counter then visually inspected sump while it ran. As soon as the water got very hot, I could see the sump leaking where it meets the stainless pan. Searched for the correct sump gasket without success. Turns out that the gasket is built into the sump for this model. The built-in gasket is very narrow (under-engineered IMHO which is probably why it developed a leak). Thanks to Simon's excellent videos at... Read more
The Door Cable Guide is an OEM part for Bosch dishwashers. This guide ensures the door cables are properly aligned and move smoothly when opening and closing the dishwasher door, helping to maintain the door's balance and functionality.
Causes of a bad door cable guide can include regular wear and tear from frequent use, damage from improper handling, or accumulation of debris that hinders smooth movement. A damaged guide can lead to improper door operation and potential strain on the door cables.
Symptoms of a bad door cable guide include:
Got new replacement spring and cord for our Bosch compact dishwasher. A plastic retaining bracket that held the old spring also was broke but the new spring had its own piece that fit into a slot in the plastic frame, so i just popped it in there, connected the cord, and bingo. The door now works. I tried using the old spring, but it would not work because of the broke bracket. Read more
The Drain Pump is an OEM replacement part for Bosch dishwashers. It is responsible for pumping out dirty water from the dishwasher tub at the end of each cycle. The drain pump works to thoroughly empty the tub in a timely manner to facilitate a smooth transition to the next cycle.
Causes of a bad drain pump can include a clogged impeller or blockage of debris inside the pump housing that inhibits proper water flow.
Symptoms of a bad drain pump include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.
Note: Due to a factory design change, connector part# 00623143 may also be needed.
This was a 5 min job after I watched a video on YouTube Any one can do this Read more
The Tine Clip Kit is an OEM part for Bosch dishwashers. This kit includes clips that secure the tines in the dishwasher rack, ensuring that dishes stay in place during the washing cycle for optimal cleaning performance.
Causes of a bad tine clip can include wear and tear from regular use, exposure to high temperatures and detergents, or accidental damage. Faulty or broken tine clips can result in unstable tines, making it difficult to properly load and organize dishes in the dishwasher.
Symptoms of a bad Tine Clip include:
I ordreded the tine clip kit. APPros was the least expensive, even with the shipping charge, and I had it in two days. Replacement piece snapped into place with very little difficulty. I also have extras from the kit so I am set if another breaks. Read more
The Detergent Cup Latch W Spring is an OEM part for Bosch dishwashers. This latch securely closes the detergent dispenser cup, containing detergent during the wash cycle.
Causes of a bad latch can include wear and fatigue of the latching spring over many uses.
Symptoms of a bad detergent cup latch include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
After having seen the video I installed the new lid and it worked. Read more
The Drain Pump is an OEM part for Bosch dishwashers. This pump is responsible for removing water from the dishwasher at the end of the wash and rinse cycles, ensuring that the appliance functions efficiently and that dishes are properly cleaned and dried.
Over time, the drain pump can become clogged with debris, suffer from electrical issues, or experience mechanical wear. These issues can lead to the pump failing to remove water effectively, impacting the overall performance of the dishwasher.
Symptoms of a bad Drain Pump include:
Water was left in the bottom of the dishwasher after each time we ran it and the dishes were no longer getting clean. Also, there was always soap left in the dispenser. I took the DW completely apart and determined the water was not being forced out of the discharge tube and was merely draining via gravity. I ordered a replacement drain pump and removed the entire motor/pump assembly from under the DW. Once the pump was replaced and the DW was put back together, the water now was forced out... Read more
The Check Valve is an OEM part for Bosch dishwashers. This component prevents dirty water from flowing back into the dishwasher from the drain hose, ensuring that the dishwasher maintains proper hygiene and efficient cleaning cycles. It is installed in the drain pump and plays a crucial role in the overall drainage system of the dishwasher.
Causes of a bad check valve can include wear and tear from regular use, accumulation of debris or mineral deposits, or damage from improper installation or handling. A faulty check valve can lead to issues with draining and water contamination within the dishwasher.
Symptoms of a bad check valve include:
It finally gave E15 code, then after drying out the E15 code came back within 5 minutes of running. I dried out the base then I ran the dishwasher and observed water coming down the overflow chute after running only 5 minutes.There is a water inlet (clear water chamber on the side of the machine). It had some gunk inside that was stopping a black float shut-off from moving. I replaced the water inlet chamber. I also suspected the non return valve (also called a check valve). From the parts... Read more
The Drain Hose is an OEM part for Bosch dishwashers. This hose is responsible for carrying the wastewater out of the dishwasher and into the household plumbing system during the draining cycle. It ensures the efficient removal of dirty water, allowing the dishwasher to function correctly and maintain optimal cleaning performance.
Causes of a bad drain hose can include blockages from food particles or debris, kinks or twists in the hose, or damage from wear and tear over time. If the drain hose is compromised, it can lead to drainage problems and potential water leaks.
Symptoms of a bad drain hose include:
This was a dishwasher swap out. I first turned the water off to the inlet hose of the dishwasher from underneath the sink. Removed the inlet water hose from sink to dishwasher. (use wrench or adjustable wrench) Then removed the screws securing old dishwasher from the cabinetry. I then pulled out the dishwasher from the cabinetry hole it was in. I unplugged the power cord from the wall of the old dishwasher. Then Ii removed the other end of inlet hose still attached to old DW (braided stainless... Read more
The Door Latch is an OEM part for Bosch dishwashers. This part securely closes the dishwasher door, ensuring that it locks in place during operation. The latch mechanism works by engaging with the door strike, preventing the door from opening while the dishwasher runs, which is essential for both the safety and proper functioning of the appliance.
Causes for replacement often include normal wear and tear from regular use, accidental damage, or a malfunction that prevents the door from securely latching.
Symptoms of a bad Door Latch include:
Replaced with new latch, took about 5 minutes. T25 torx screwdriver and flathead screwdriver needed. Read more
The Drain Hose is an OEM part for Bosch dishwashers, designed to facilitate the efficient and reliable expulsion of wastewater from the appliance to the household drainage system. This component ensures that used water is properly drained out after each wash cycle, preventing water from backing up and causing issues within the dishwasher. The hose measures 5 feet. This Bosch dishwasher drain hose comes with one O-ring. For the 1-foot drain hose order 00298556.
Causes for replacement may include clogs from food particles or debris, physical damage such as cracks or splits that lead to leaks, or a hose that has become stiff and noncompliant over time.
Symptoms of a bad Drain Hose include:
This genuine Bosch OEM replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Ordered replacement drain hose, left hand panel of dishwasher removed (remove 2 screws in front left trim panel & friction fit clip at top back then slide up & off. This reveals the O-ring drain hose connection point. You need to remove the retainer block where the hose exits the appliance. Old hose pulls out and new hose pushes in. In the end a very easy installation. Most of the time spoent here is removal & reinstallation of dishwasher back into position - the actual hose swap takes 10 mins Read more
The Circulation Motor and Heater Assembly is an OEM part for Bosch dishwashers. This combined unit is responsible for circulating water throughout the dishwasher during wash cycles and heating the water to the optimal temperature for effective cleaning.
Causes of a bad circulation motor and heater assembly can include electrical failures, wear and tear over time, or damage from debris or mineral buildup. A malfunctioning assembly can result in poor cleaning performance and water not being heated correctly.
Symptoms of a bad circulation motor and heater assembly include:
I began looking for parts on your website and the initial google search took me to a bosh water heater. I was a little unsure about that particular part and so I wrote to your "ask a professional" section. He replied to me within about 24 hours. The part that Google directed me to was not correct and the technition from your website helped me find the right part very quickly. Shipping was extrememly quick and the price couldn't be beaten anywhere on-line. The heat pump was a little time... Read more
The Sump to Water Inlet Hose is an OEM replacement part for Bosch dishwashers. This hose provides a pathway connecting the dishwasher's sump and water inlet valve. It allows the sump to fill with water during different dishwashing cycles, facilitating key functions like rinsing, spraying cycles, and final rinses. Proper connection between these components via this hose is required for the dishwasher to operate efficiently.
Causes of a faulty sump to water inlet hose include cracking, leaking, or kinking over repeated use and cycles. Hoses can become damaged due to pinching in the dishwasher or exposure to high water pressures over time.
Symptoms of a bad sump to water inlet hose include:
This replacement part is also compatible with some Thermador, Gaggenau, and Kenmore models.
The Drain Pump LID is an OEM part for Bosch dishwashers, designed to securely cover and protect the drain pump assembly. This crucial component ensures that the drain pump is shielded from debris and damage, allowing it to efficiently remove used water from the dishwasher at the end of each cycle.
Causes of these symptoms can range from physical damage due to impact or wear and tear over time, leading to cracks, warping, or a degraded seal.
Symptoms of a bad Drain Pump LID include:
After fighting, attempting to clean filer a few times, we gave up and ordered one, one with a lid for the drain pump. Dishwasher is running great now. Easy to order. Got the correct part first time. Great Experience! Read more