Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Prevents water leaks by sealing your washer door during wash cycles. Replace if torn, cracked, or crusted with detergent buildup. Verify fit with your model.
Appliance Pros made sure I had the correct part by verifying the model of my appliance. The part arrived on the scheduled day as promised I did the repair it myself. Read more
Fix excessive vibration and loud spinning noise in your washer. Balance ring assembly stabilizes the drum during spin cycles. Advanced DIY repair.
With all the bouncing around the shocks appeared to be done in but that was not the issue. The key was the balance ring. It had leaked all the fluid out causing all the beads to clump. This caused the drum to wobble wildly and not spin at speed. Getting to the ring to replace it is not a trivial task and took me several hours. Would have been much easier with help as the drum is quite heavy. The on-line video's are very handy and should be watched before attempting this job to save you a... Read more
Fix water leaks from your washer's drain system. This drain hose assembly channels wastewater properly. Easy DIY repair with back panel removal.
This is an easy fix. Just remove the back panel, remove the hose clamp to pull out the old hose, put the new hose on, make sure the clamp is well centered onto the connection, and return the back panel. Make sure to insert the drain hose into the three plastic guides that prevent the hose from moving around. The Samsung factory did not do this on my original hose, which is why it failed, because it was rubbing against the tub support and it wore a hole into the hose. I am going to complain... Read more
Fix 4E error codes and drainage issues with this water level pressure switch. Common when washer drains unexpectedly or won't spin properly.
Removed top panel to reach the hose and sensor. Propped the washer back, reached up to remove bottom hose assembly. Replaced with new hose and new sensor. Put top panel back on. Parts place told me the part was backordered for months and repair would cost at least $80. Got it in three days and fixed it myself. Read more
Fix tE error codes with a new water temperature thermistor. This sensor monitors wash water temp. DIY-friendly repair takes under 10 minutes.
I first check the schematics to find the heat sensor. On my model it's c on the control panel. I checked the continuity on the orange and white wires. It showed some continuity but not much. I then went to the heater element and found the orange and white wires going to the thermistor. Turns out the heater element and thermistor need repalced. Read more
Fix washer leaks from worn filter gaskets or drainage issues. This pump filter assembly traps lint and debris. Simple DIY replacement in under 30 minutes.
Took out the original and put in the replacement. Read more
The Washer Door Lock Bezel Cover-Switch Assembly is an essential component for maintaining the functionality and security of your Samsung washer. This genuine OEM part ensures a perfect fit and reliable performance, matching the original design of your appliance. The assembly combines both the bezel cover and the switch, providing a seamless replacement that restores the door locking mechanism to its optimal state. By choosing this Washer Door Lock Bezel Cover-Switch Assembly, you benefit from enhanced durability and precise operation, preventing issues such as door leaks or malfunctioning locks. Installation is straightforward, allowing you to easily replace a damaged or worn-out part without the need for professional assistance. Compatible with a wide range of Samsung washer models, this genuine OEM part guarantees compatibility and longevity. Investing in this high-quality assembly helps maintain your washerGÇÖs efficiency and extends its lifespan, ensuring that your appliance continues to deliver excellent washing performance. Trust in this reliable component to keep your washer running smoothly and securely.
Ordered part by looking at parts diagram and followed You tube instructions. Easy and quick! Read more
The Washer Diaphragm Assembly is essential for maintaining the smooth operation of your washing machine. This genuine OEM part is specifically designed for Samsung washers, ensuring a perfect fit and reliable performance. By replacing a worn or damaged diaphragm, you can restore optimal water control and enhance your washerGÇÖs efficiency. The assembly is constructed with high-quality materials, providing durability and long-lasting use. Installing the Washer Diaphragm Assembly is straightforward, allowing you to quickly get your appliance back to working order without hassle. This genuine OEM part helps prevent leaks and ensures consistent washing cycles, ultimately saving you time and reducing the need for frequent repairs. Trust the Washer Diaphragm Assembly to deliver the performance and reliability you expect from your Samsung washer, enhancing your laundry experience and prolonging the life of your appliance.
Replaced the door boot seal after 4 tries to get the correct part. The team at APP has the part and got it to me in just over 24 hours (without express shipping). This video was very helpful - https://m.youtube.com/watch?v=Jedwhd1bg0g. If you have the washer version with the larger nozzle tube on the left at the 9:00 position you need part number AP6262314 (DC97-19755C). Read more
Fix ND error codes and drainage issues with this washer check valve. Prevents backward water flow in drain pump. DIY-friendly repair with video guide.
Washer said error no drain. Cleaned the filter and still no drain. So the next step was to check the hose for any debris and when I went to pull the hose off it broke, at the same time I found the check valve flap broke in the drain pump and it was blocking the hose. So I replaced the check valve on the drain pump and replaced the hose. Read more
Fix a washer that won't fill, overfills, or runs continuously with a new water inlet valve. Simple 20-minute DIY repair with step-by-step video guide.
Changed the water valves. Read more
Secures the washer drum during transport or moving. Prevents damage by immobilizing the tub. Replace missing or lost bolts before relocating your washer.
We are moving soon. In checking, I found that a front loading washing machine tub must be stabilized using shipping bolts. I found the correct items on line at AppliancePartsPros.com. "Chris" of your staff was very helpful. He informed me that my washer required only 3 shipping bolt assemblies, instead of the four I expected to buy. The bolts were delivered two days after my order. Read more
The washer motor rotor assembly is the outer rotating component of a direct-drive washer motor that works with the stator to generate the electromagnetic force that spins the wash basket. It is a core part of the motor system that drives both the wash and spin cycles. Replace this part if your washer won't spin or agitate, makes a loud grinding or humming noise during a cycle, or if the machine shakes excessively during operation.
Actually, I am returning your parts. THERE IS NOTHING WRONG WITH THEM! My wife actually found out that we had a warranty on our washer that we didn't know about. But, I can comment that I did chat with your customer service and you guys were very helpful. Read more
Fix leaking during rinse or spin cycles with this washer check valve ball. Prevents water siphoning and maintains proper water levels. Easy DIY repair.
Replacing the upper nozzle connector did the trick. I could not see damage in the older upper nozzle, it is possible that I could have fixed this just by tightening the parts - but i am happy I purchased both the upper nozzle and check valve ball, it feels good to have installed brand new parts in the washer. Read more
The Washer Liquid Soap Dispenser Tray is an essential component for maintaining the efficiency of your Samsung washer. This genuine OEM part is specifically designed to hold and dispense liquid detergent accurately, ensuring that each laundry cycle receives the right amount of soap for optimal cleaning performance. Crafted with durability in mind, the dispenser tray withstands regular use and resists cracking or leaking, providing a long-lasting solution for your appliance. Installing the Washer Liquid Soap Dispenser Tray is straightforward, making it an ideal choice for DIY repairs. Its precise fit guarantees seamless integration with your Samsung washer, restoring the functionality of the liquid soap dispensing system without any complications. By replacing a damaged or malfunctioning tray with this genuine OEM part, you enhance the overall performance of your washer and extend its lifespan. Compatible with a variety of Samsung washer models, this liquid soap tray offers reliable and consistent detergent delivery, helping you achieve cleaner, fresher laundry with every wash. Choose the Washer Liquid Soap Dispenser Tray for a dependable and efficient solution to keep your washer operating smoothly.
Replaced with new Detergent cup and fill cap. Cup symphony perfectly. Simple fix for frustrating problem. Read more
The Refrigerator Screw-Tapping is an essential component for maintaining your Samsung refrigerator's functionality. This genuine OEM part ensures precise threading, allowing screws to be securely fastened without damaging the surrounding materials. Designed specifically for Samsung refrigerators, it guarantees a perfect fit and reliable performance. Whether you are replacing a damaged screw-tapping or performing a repair, this Refrigerator Screw-Tapping simplifies the process, saving you time and effort. Its high-quality construction provides durability and long-lasting support for your appliance. By choosing the Refrigerator Screw-Tapping , you ensure your refrigerator remains sturdy and functional, enhancing its overall lifespan. This genuine OEM part is easy to install and seamlessly integrates with your existing setup, making it an ideal choice for DIY repairs. Trust in the quality and compatibility of this Samsung part to keep your refrigerator operating smoothly and efficiently.
The start button had been tricky to use. You had to push it in just a certain way to get the dryer to start. Eventually it was non-responsive. All other controls worked and there was no error code displayed. The repair was to replace the whole control board which cost around $100. Heavy sigh.. Be sure to keep track of all your screws. BTW it was not the thermal fuse. All the online videos say this is the first thing to look for when the dryer will not start. Be sure to check with the person... Read more
Fix washer leaks caused by a failed nozzle connector. This water distribution part secures the connection in your washer's system. DIY repair.
After discovering the cause of the leak was horrific engineering on Samsung's part. I ordered the nozzle connector (which was the failed part) and the check valve ball. Repairs were done in short order, and the machine was up and running again. So with the cost of the parts (crazy amounts for shipping), over $300 for a new floor (as the other was totally ruined by the flood of water from the machine) and three days of my time to reconstruct the laundry room, I'd say all went well. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.