Line Chef Small Engine Start Switch Parts
Genuine Ge part
By: Ge
Part Number: WH12X10141
Fix a washer that won't agitate or spin with this lid switch. This safety part detects if the lid is closed. Easy DIY repair with basic tools.
Do-It-Yourself Stories from Customers like You
Washing machine would agitate but not spin Kevin T. • Overland Park , KS • January 27, 2020
Replaced lid switch and capacitor
Read more
More
$39.63
- Compare At:
-
$47.56
- You Save:
-
$7.93
Genuine Frigidaire part
By: Frigidaire
Part Number: 316238202
The Dual Element Surface Switch is an OEM part for Frigidaire electric ranges and cooktops. It governs power distribution to the dual element.
Causes may be loose electrical terminals within the switch, defects from past power surges, or general wear over extended use.
Symptoms of a bad surface switch include:
- Inability to toggle one or both elements independently
- Elements activating intermittently or staying stuck on
- Overheating, sparks or strange sounds from faulty connections
- Repeated burning or singeing of cookware bottoms
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Both large burners were starting to go to higher heats at lower settings. James T. • Hilo , HI • April 23, 2023
I replaced both the large single element and the large dual element control switches. It appears the resistors were burning out. Problem seems to be fixed. Will know later when I do some simmering.
Read more
More
$85.95
- Compare At:
-
$101.42
- You Save:
-
$15.47
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820051
Fix washer overfilling or won't fill issues with a new water level pressure switch. Prevents flooding and restores proper fill cycles. 10-minute DIY repair.
This part fixes the following symptoms
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Washer overflowed and flooded the basement Tyler H. • Gardner , KS • February 27, 2016
Replaced the water-level switch and hose. Washer works again, no overflowing since!
Read more
More
$110.42
- Compare At:
-
$131.40
- You Save:
-
$20.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10149355
Fix burners stuck on high or not regulating temperature with this range infinite switch. Controls heating element power for precise cooking control.
Do-It-Yourself Stories from Customers like You
I had to change the burner switch Paul C. • Rochester , NY • November 09, 2014
Using the video on your site I was able to make the repair. It was a pretty straight forward repair. Thanks for having the diagram on your site for helping me find the right part.
Read more
More
$148.53
- Compare At:
-
$176.75
- You Save:
-
$28.22
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293830
If your range burner won't turn on or off properly, or the indicator light stays on when turned off, this infinite switch restores control. DIY repair.
Do-It-Yourself Stories from Customers like You
Burner control bad, could not tell if it was on the number Chalmer M. • Tipp City , OH • January 21, 2022
Remove front panel and replaced. Received parts fast.
Read more
More
$80.21
- Compare At:
-
$95.45
- You Save:
-
$15.24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8054980
This lid switch is the washer's safety interlock. It detects when the lid is closed so the machine can agitate and spin, and cuts power when the lid is opened to stop operation and enhance user safety.
- Monitors lid position and allows agitation/spin only when the lid is closed
- Interrupts motor operation if the lid opens during a cycle
- Common failure symptoms: washer won't start or spin, fills but stalls, stops intermittently, or displays "lid open" alerts
- Restores proper cycle progression and safety shutoff when replaced
What's included: One lid switch Install notes:
- Disconnect power and water supply before servicing
- Access the switch from under the top panel/console per your model's procedure
- Release the old switch, move the harness to the new switch, and secure wiring away from moving parts
- Ensure the lid closes and actuates the switch before reassembly and test run
Do-It-Yourself Stories from Customers like You
Direct drive motor coupling failed wouldn't agitate or spin Tim H. • Fort Collins , CO • October 18, 2014
Was set to pull the trigger on a new washer since this one was 10+ years old. Broke a $25 lid switch fumbling to get the washer open before I found the appliancepros video library. Once I got things apart the right way I was able to diagnose the problem in 5 minutes. Identified the $10 part needed. Got the $10 coupling and the $25 switch and had the washer working like new in 20 minutes. I'm pretty proud of myself.. not going to tell anyone about the $25 switch.
Read more
More
$115.49
- Compare At:
-
$137.43
- You Save:
-
$21.94
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304509458
This door release lever connects the push-button to the latch assembly inside the microwave. Replacing a worn lever restores smooth, reliable door opening so the button works on the first press.
- Transfers motion from the door-open button to the latch hooks to release the door
- Helps resolve a door that won't open when the button is pressed
- Addresses a button that feels loose, sticks, or lacks resistance
- Replaces a cracked or broken lever causing intermittent door operation
What's included: 1 lever Install notes:
- Unplug the microwave and discharge the high-voltage capacitor before servicing
- Remove the grille and control panel to access the interlock/latch area
- Note spring and pivot orientation and transfer any reusable hardware
- Test door release action before completing reassembly
Do-It-Yourself Stories from Customers like You
Microwave blew line fuse Gerald G. • St. Louis , MO • August 05, 2019
It took a long time to determine the problem but eventually I discovered that the plastic bracket (latch hook) that held the three door-switches showed appreciable wear from repeated door openings and closings. This wear stopped the door from sealing properly and the door switch safety mechanism blew the line fuse. I replaced the worn bracket (AP6230612) as well as the plastic latch mechanism (AP4553585) on the door that engages this bracket (and of course the fuse too) and the microwave now...
Read more
More
$8.95
- Compare At:
-
$10.65
- You Save:
-
$1.70
Genuine Frigidaire part
By: Frigidaire
Part Number: 240505801
Fix a refrigerator light that won't turn on or off when the door opens or closes. This door-activated light switch is a simple 5-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Broken ice dispenser actuator, rusty front plate, bad fridge door switch Michael A. • Garnerville , NY • August 06, 2020
My problem started with a rusting condition in the ice bin that spiraled out of hand. I took apart the ice bin and all the hardware thinking I could clean it with the suggested baking powder. Plastic parts cleaned up like new, metal parts were pitted. I wire brushed and sanded the parts put it all back together and gave it a try. All appeared fine then two days later the ice dispenser stopped. I watched a couple of videos and most pointed to the ice auger motor. One video specifically said you...
Read more
More
$64.95
- Compare At:
-
$77.94
- You Save:
-
$12.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 316239601KIT
Fix a burner that won't turn off or heat properly with this dual infinite switch. Controls both inner and outer element rings. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Needed a surface element dual control switch for my frigidaire range as the surface element would remain on èven when the switch was turned off Michael H. • Lauderhill , FL • July 22, 2016
Relatively easy DIY
Read more
More
$71.95
- Compare At:
-
$133.26
- You Save:
-
$61.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3391902
Dryer won't start or keeps running with door open? A faulty door switch prevents proper start/stop control. Easy DIY fix in under 30 minutes restores safety.
Do-It-Yourself Stories from Customers like You
Stacked washer/dryer dryer light stayed on when door closed and dryer would not turn on. 25 years old Neal Jay M. • Portland , OR • June 12, 2019
Order part and removed 3 hex head screws at top front edge of dryer and slightly lifted up on control panel to lift off pane. It has hangers that support panel while servicing. Remove 2 screws at inside top edge of dryer opening (where lever of switch protrudes) disconnect 3 wire clips at old switch and restore wire clips at new switch and place switch into position and restore 2 screws to secure switch body.
Read more
More
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01
Genuine Whirlpool part
By: Whirlpool
Part Number: W11685945
The Dispenser Switch is an OEM component for Whirlpool washing machines. Located inside the detergent compartment, it detects when the door is properly closed to enable cycle functions.
The sensitive switch utilizes durable contacts to reliably connect without false readings due to vibration. Its secure plastic housing contains electronic components regulating additive distribution during selected cycles.
Symptoms of a bad dispenser switch can include:
- Inability to start cycles despite closed door
- Dispenser door fails to lock properly
- Fault codes relating to dispenser issues
- Cycles unexpectedly terminating mid-load
Replace yours today with this genuine Whirlpool switch to ensure detergent and other additives activate at optimal times for thorough, even cleaning. Compatible with Kenmore, Maytag, and some Jenn-Air washers.
More
$78.78
- Compare At:
-
$94.54
- You Save:
-
$15.76
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10330137
The Push Button Switch is an OEM part for Whirlpool washing machines. This part activates various functions and cycles on the control panel of the washer. The switch is designed to ensure responsive and reliable operation when selecting wash settings.
Causes of a bad push button switch can include wear and tear from frequent use, exposure to moisture, or physical damage from impacts.
Symptoms of a bad push button switch include:
- Unresponsive buttons on the control panel
- Inability to start or change wash cycles
- Intermittent operation of washer functions
- Error codes related to control panel issues
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer was humming when pushing start button Chris K. • N. Wildwood , NJ • May 28, 2017
Removed front of dryer panel, removed top, and removed drum. Replaced motor and wheel, because the old wheel was rusted on the motor shaft, and could not be removed, so I had to break it off. Replaced motor, and reassembled. Everything works now. I also replace the switch-Pb, because the start button was getting stuck.
Read more
More
$229.95
- Compare At:
-
$271.34
- You Save:
-
$41.39
Genuine Ge part
By: Ge
Part Number: WR09X10106
Refrigerator won't cool or compressor clicking? The overload and start relay protects and starts your compressor. DIY fix in 30-60 minutes.
Do-It-Yourself Stories from Customers like You
Compressor not running. James F. • Cudjoe Key , FL • April 02, 2014
I did some research. Found a comment on this website... shake the ptc component it was ratteling... there's a ceramic disc inside the ptc. if broken, this could be the source for the ratteling sound. Sure enough that was happening... one new ptc later an all is good. Ran fridge for 3 days now... no issues
It was gamble, took it.. and came out ahead. The capicitor looked as if was OK... it was not buldging... no obvious burnt marks anywhere.
Tricky part was getting the 'bale' wire reattached...
Read more
More
$37.95
- Compare At:
-
$44.78
- You Save:
-
$6.83
Genuine Frigidaire part
By: Frigidaire
Part Number: A00055408
Fixes dishwasher leaking, error code i20, or pump that won't stop running. Monitors water pressure to control wash cycles. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Leaking dishwasher. Richard W. • Louisville , KY • April 20, 2020
Replace the pressure switch.
Read more
More
$65.74
- Compare At:
-
$78.23
- You Save:
-
$12.49
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74003122
Fix a burner stuck on high or won't adjust temperature with this infinite switch. Controls cooktop burner heat levels. DIY repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Element would stay on high even at lower settings why it would fail in the "high" mode is not a good design David M. • Suffield , CT • February 04, 2015
Replaced the Infinite Switch and that solved the problem. Did not need to replace the Surface Element
Read more
More
$61.56
- Compare At:
-
$73.26
- You Save:
-
$11.70
Genuine Frigidaire part
By: Frigidaire
Part Number: 316219004
Fix burners that won't spark or click constantly. This igniter switch wiring harness restores reliable lighting on gas ranges. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
One of my stove burners would not spark. Mike M. • Bound Brook , NJ • October 26, 2023
I replaced the switch/wire harness that connects to the gas valves.
Read more
More
$128.66
- Compare At:
-
$151.82
- You Save:
-
$23.16