Power Small Engine Safety Switch Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304504077
Fix i20 or i30 error codes with this dishwasher pressure sensor. Monitors water pressure to prevent overfilling. Common DIY repair for continuous filling.
Do-It-Yourself Stories from Customers like You
If yor fridgidaire dishwasher is showing an i30 error code do not assume there is a leak Kenneth T. • Vineland , NJ • April 24, 2017
I had to pull and clean the pressure sensor switch four times in a year. Each time more gunk accumulated. When that happens the sensor does not close the water valve. The dishawsher keeps filling and the water comes out through the overfill port. The water then goes in the catch basin under the washer and floats the emergency switch. This cuts off the water but keeps the pump running just in case. Tripping the circuit breaker is only a temp fix. What happens is the water level may have...
Read more
More
$94.78
- Compare At:
-
$111.84
- You Save:
-
$17.06
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY304475
The Cycling Thermostat is an OEM part for Whirlpool dryers. This thermostat regulates the temperature inside the dryer by cycling the heating element on and off to maintain a consistent temperature. .
Causes of a bad cycling thermostat can include wear and tear over time, electrical faults, or damage due to overheating.
Symptoms of a bad Cycling Thermostat include:
- Clothes taking too long to dry
- The dryer not heating at all
- The dryer overheating
- Erratic or inconsistent drying temperatures
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
It was taking unusually long to dry a typical load Robert L. • Williamsburg , VA • November 15, 2014
I removed the front panel and observed the heating element while running the dryer. It was cycling off every minute or so and staying off for several minutes. Even though it was likely the high temp cycling thermostat I replaced both the 14, and 15 cycling thermostats which I think are the original factory units. That makes them nearly 35 years old. Problem fixed.
Read more
More
$61.56
- Compare At:
-
$73.87
- You Save:
-
$12.31
Genuine Whirlpool part
By: Whirlpool
Part Number: W10335056
Washer not filling properly or overfilling? A faulty water level pressure switch fails to signal correct fill levels. DIY repair in about 1 hour.
This part fixes the following symptoms
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Washing machine wouldn't fill water to the correct level it filled as if it were set to "small load" every time Jessica A. • Baltimore , MD • April 13, 2014
I took the washer apart and replaced the water level switch and hose with new ones. I followed the video that I found on youtube (which is on the site) and had no problems at all.
Read more
More
$62.46
- Compare At:
-
$74.33
- You Save:
-
$11.87
Genuine Ge part
By: Ge
Part Number: WE04X29714
Dryer not drying evenly or shutting off too soon? A faulty outlet thermistor causes inaccurate heat control. This sensor monitors exhaust temperature.
More
$18.95
- Compare At:
-
$22.36
- You Save:
-
$3.41
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10415587
This switch monitors water levels in the washing machine tub and signals when the correct amount has been reached. Located near the control panel or top of the washer, connected to a pressure tube. Replace when the washer overfills, underfills, or won't start filling with water.
Do-It-Yourself Stories from Customers like You
Whirlpool washer has a f35 code (analog pressure sensor) Paul M. • Carlisle , PA • June 13, 2014
I was searching the web for solutions and came across two folks who had similar trouble code. One fixed his by removing the pump strainer from the pump to find coins blocking water flow, thus the analog water pressure sensor provided a failure response. My issue was solved by following the other hints I got. I ordered a new sensor (switch). It was expensive for what it is, but the washer will not run correctly without it! The part arrived in a very timely manner, and it was the right part....
Read more
More
$229.61
- Compare At:
-
$273.24
- You Save:
-
$43.63
Genuine Whirlpool part
By: Whirlpool
Part Number: W11123943
Ice maker not working or won't dispense? This ice bin safety switch detects when the bin is in place to activate your ice maker. Easy DIY fix.
Do-It-Yourself Stories from Customers like You
The refrigerator would not make ice or dispense water or ice. Ken W. • Aurora , CO • June 15, 2022
Part easily replaced and problem was solved. Saved service call.
Read more
More
$28.43
- Compare At:
-
$34.12
- You Save:
-
$5.69
Genuine Whirlpool part
By: Whirlpool
Part Number: W11316246
Fix a washer that overfills or won't fill properly with a water level pressure switch. Monitors water levels during wash cycles. DIY repair.
More
$80.95
- Compare At:
-
$97.14
- You Save:
-
$16.19
Genuine Ge part
By: Ge
Part Number: WE4M80
This replacement part is a high-limit thermostat, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This high-limit thermostat is typically found in dryers and controls the heat inside the drying tub. This is especially important as different dryer settings require different amounts of heat. If the high limit thermostat works properly, the temperature inside the tub should reach the correct amount during each drying cycle with no issues. A new high-limit thermostat might be needed if the user notices that the dryer is unable to reach the appropriate level of heat for a certain drying cycle. This is also true if the dryer is becoming too hot when the heat is supposed to be set to low. Make sure the dryer is cooled down prior to replacing this part as the areas in the back of the dryer can become very hot during use. Be sure to reference the specific user manual for more instructions on how to replace the thermostat. This thermostat is sold individually and is a genuine OEM part. The thermostat is sourced directly from the manufacturer.
Do-It-Yourself Stories from Customers like You
No heat Roland J. • Hawthorne , NJ • May 11, 2015
Replaced thermal stats
Read more
More
$56.95
- Compare At:
-
$67.77
- You Save:
-
$10.82
Genuine Ge part
By: Ge
Part Number: WH12X10479
Fix a washer that won't fill properly or overfills with this water level pressure switch. Common when load size selector fails. 20-minute repair.
Do-It-Yourself Stories from Customers like You
Water level pressure switch failed Larry P. • Colorado Springs , CO • November 13, 2015
Removed fill level pressure switch knob. Removed three screws from the back of the control panel.Opened the control panel and removed electrical connector and plastic tube from the pressure switch. Removed and replaced pressure switch. Placed control panel to correct position and replaced the three screws.
Read more
More
$54.45
- Compare At:
-
$64.80
- You Save:
-
$10.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10391743
Fix burners stuck on high heat or won't adjust temperature with this infinite switch. Common issue with multi-ring burners. Easy DIY repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Front two burners were heating out of control Garrey P. • Rogers , TX • December 11, 2018
Replaced two switches that controlled two front burners. One controlled three different burner sizes options in one burner. The other was the speed burner, basically three different burner options in one burner.
Read more
More
$89.31
- Compare At:
-
$107.17
- You Save:
-
$17.86
Genuine Whirlpool part
By: Whirlpool
Part Number: W10337781
The Water Level Switch is an OEM replacement part for Whirlpool washing machines. It monitors and controls the amount of water that fills the drum during each wash cycle. By ensuring the appropriate water level, it aids in the efficient and effective cleaning of laundry while conserving water.
Symptoms of a bad Water Level Switch include:
- The washing machine overfilling or underfilling with water
- Inconsistent or erratic water levels during cycles
- The machine failed to progress from filling water to the wash cycle
- Error codes or indicators related to water levels or filling
Causes for a malfunctioning Water Level Switch can include electrical issues affecting signal transmission, mechanical failures within the switch, or blockages in the pressure hose connected to the switch.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water level of washing machine was stuck on extra small Stuart D. • Burke , VA • April 13, 2014
I replaced the assembly behind the water level knob.
I watched the video on appliancepartspros.com before starting, and then watched it again in short portions while going thru the repair process.
Read more
More
$118.53
- Compare At:
-
$142.24
- You Save:
-
$23.71
Genuine Bosch part
By: Bosch
Part Number: 00424410
Fix a dishwasher that won't power on or reset with this on/off switch. Replaces worn or moisture-damaged switches. DIY-friendly installation.
Do-It-Yourself Stories from Customers like You
The switch stopped working Kirk B. • Pelham , AL • March 24, 2014
Initially performed troubleshooting over the phone with Bosch customer support and did preliminary research on the web. Ultimately had to call out service technician to isolate/confirm problem. He confirmed the problem was most likely the switch (if not, the actually computer processor) and gave me the part number (since it was going to take 10 BD's for him to get the part). I ordered through Appliance Parts Pros and received the part in only 2 days. However, upon trying to install it, I...
Read more
More
$62.68
- Compare At:
-
$75.22
- You Save:
-
$12.54
Genuine Lg part
By: Lg
Part Number: 6600JB3007K
Refrigerator light won't turn off when door closes? This door switch controls interior lighting based on door position. Simple DIY repair.
This part fixes the following symptoms
-
Light not working
-
Not dispensing water
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Lights on refrigerator stayed on. Sue L. • Boise , ID • July 05, 2020
Ordered 2 light switches and replaced them.
Read more
More
$34.75
- Compare At:
-
$41.00
- You Save:
-
$6.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406102
Dryer won't start or runs with door open? The door switch is often the culprit. This safety switch ensures operation only when closed. DIY-friendly, takes 15-30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Door switch on dryer was not working dryer would continue to run when the door was opened Jeff W. • Knoxville , IA • September 04, 2015
Simple unplug, unscrew and replace.
Read more
More
$34.75
- Compare At:
-
$41.70
- You Save:
-
$6.95
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8283288
Comes with jumper wire.
Do-It-Yourself Stories from Customers like You
Drier would not start when i set it to diagnostics code said 6e all display lights turned on Randal B. • Salt Lake City , UT • December 21, 2014
Searched internet for answers. Decided to replace the door switch. Drier now runs great!
Read more
More
$83.95
- Compare At:
-
$99.06
- You Save:
-
$15.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10285518
Fix a washer that won't advance through cycles or gets stuck between wash and rinse. This cycle switch controls your wash sequence. DIY repair.
Do-It-Yourself Stories from Customers like You
Only hot water no matter what setting Jane D. • Newport , RI • June 23, 2025
Ordered the right part, took the back off the top control panel, and popped it in.
Read more
More
$76.95
- Compare At:
-
$91.57
- You Save:
-
$14.62