Water Temperature Sensor Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11194438
Holds the water filter and routes water to the dispenser and ice maker. Replace if cracked, leaking, or won't engage the filter. Confirm fit by model.
Do-It-Yourself Stories from Customers like You
Water filter stuck and housing broken. Dennissprouse S. • Dumfries , VA • August 14, 2017
Replaced housing. That was simple but finding directions in how it I remove top of cabinet was time consuming. After two hours of searching I finally found one article that explained why there were no screws to remove.
Read more
More
$96.95
- Compare At:
-
$114.40
- You Save:
-
$17.45
Genuine Ge part
By: Ge
Part Number: WB24T10081
Oven won't heat or shuts off after reaching temperature? The hi-limit thermal switch prevents overheating. DIY repair takes 30-60 minutes.
Do-It-Yourself Stories from Customers like You
Oven heating element and broiler heating element stopped working Peter W. • Wheat Ridge , CO • September 15, 2019
Replaced the hi-limit switch and oven control.
Read more
More
$38.95
- Compare At:
-
$46.74
- You Save:
-
$7.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4451042
Oven won't heat or has no power after self-clean? A blown thermal fuse is likely the cause. This safety part cuts power if temps get too high.
Do-It-Yourself Stories from Customers like You
Stopped working while in self cleaning mode. Eberhard L. • Raleigh , NC • March 17, 2023
This is for the Whirlpool in-wall double oven GBD307PDS10. No power and the door locked after the shutdown before the self-cleaning cycle was over. I watched some video and this is a known issue the fuses blow during self-cleaning.
I opened the door with a 90-degree hook, an easy task. Took doors off (watch video from others), unscrewed from the wall, and made a very small platform. and took the oven out (need two people and take the doors off first. The doors are heavy and you won't lift the...
Read more
More
$28.43
- Compare At:
-
$34.12
- You Save:
-
$5.69
Genuine Whirlpool part
By: Whirlpool
Part Number: EDR6D1
Reduces contaminants like chlorine and lead for clean drinking water and ice. Replace every 6 months for optimal performance. Confirm fit with model.
Do-It-Yourself Stories from Customers like You
Water filter was out Glen H. • Apache Juction , AZ • May 15, 2015
Ordered a new one
Read more
More
$53.75
- Compare At:
-
$63.96
- You Save:
-
$10.21
Genuine Ge part
By: Ge
Part Number: WR50X10025
Fixes warm fridge with cold freezer caused by frosted evaporator coils. This defrost thermostat regulates defrost cycles. Moderate DIY repair, 1-2 hours.
Do-It-Yourself Stories from Customers like You
Fridgerator was too warm 60 deg f found that evaperator was freezing over not letting cool air into fridge Christopher S. • St.Paul Park , MN • October 08, 2014
Well at first I thought the defroster element was the problem,so I was removing it to ohm it out and it broke upon removal.After replacing the element I was hoping that was the problem...After a week or so started having same problem with evap. freezing over.So I came back to your site to research what else could be the problem,and low and behold found an article about the defroster thermostat and a video on how to replace it.Ordered the thermostat and it was here within 2 days,replaced the...
Read more
More
$34.26
- Compare At:
-
$40.43
- You Save:
-
$6.17
Genuine Ge part
By: Ge
Part Number: WE4M80
This replacement part is a high-limit thermostat, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This high-limit thermostat is typically found in dryers and controls the heat inside the drying tub. This is especially important as different dryer settings require different amounts of heat. If the high limit thermostat works properly, the temperature inside the tub should reach the correct amount during each drying cycle with no issues. A new high-limit thermostat might be needed if the user notices that the dryer is unable to reach the appropriate level of heat for a certain drying cycle. This is also true if the dryer is becoming too hot when the heat is supposed to be set to low. Make sure the dryer is cooled down prior to replacing this part as the areas in the back of the dryer can become very hot during use. Be sure to reference the specific user manual for more instructions on how to replace the thermostat. This thermostat is sold individually and is a genuine OEM part. The thermostat is sourced directly from the manufacturer.
Do-It-Yourself Stories from Customers like You
No heat Roland J. • Hawthorne , NJ • May 11, 2015
Replaced thermal stats
Read more
More
$56.95
- Compare At:
-
$68.34
- You Save:
-
$11.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2225521
Secures the water filter and maintains watertight seals to prevent leaks. Replace if cracked or leaking at tube connections to restore water flow.
Do-It-Yourself Stories from Customers like You
Leaking water filter housing Ron Y. • Millsboro , DE • July 24, 2015
It's bit of a chore in that on my Whirlpool Refrig you need to remove the grill on bottom front and the Utility Panel on bottom rear. Then unscrew the original filter housing and pull it out through the back of utility opening. Remove the two water hoses and put them into new filter house. Reverse the disassembly process to reinstall new filter housing. I'm old and slow so the process took me about 45 minutes. (Note: Unplug electric and turn off water inlet before starting.)
Read more
More
$114.48
- Compare At:
-
$136.23
- You Save:
-
$21.75
Genuine Whirlpool part
By: Whirlpool
Part Number: WP35001191
The Thermistor is an OEM part for Whirlpool dryers. This part measures the temperature inside the dryer drum and sends this information to the control board, which regulates the heat to ensure efficient drying.
Causes of a bad thermistor can include regular wear and tear, exposure to high temperatures, or electrical faults.
Symptoms of a bad thermistor include:
- Dryer not heating or overheating
- Clothes taking longer to dry
- Inconsistent drying performance
- Error codes related to temperature issues
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Had to replace thermistor Jeff D. • Tunnel Hill , GA • September 02, 2014
Replaced heating element about three months ago. Had to order thermistor because of error code "ts" on display and dryer would not run. Removed the two screws on the back that holds the top in place. After removing the top, remove the screws that hold the control panel on front. Make sure not to break the tabs that help hold it in place You do not have to unplug any connectors for the control panel. Lay control panel across top of dryer carefully so that it will be out of the way. Next...
Read more
More
$59.48
- Compare At:
-
$70.78
- You Save:
-
$11.30
Genuine Whirlpool part
By: Whirlpool
Part Number: W10113040A
Grease filter for range hoods and over-the-range microwaves. Dimensions: 6-1/2" x 12-3/16" x 3/32" (6.5 x 12.1875 x 0.09375). Rectangle shape. Captures grease from cooking air. Replace when clogged, discolored, or every 6-12 months.
Do-It-Yourself Stories from Customers like You
Broke microwave handle Gopakumar G. • Orangevale , CA • November 24, 2014
I started by watching the video posted by couple of people on youtube on how to replace a microwave handle. After taking out the liner, I hit a roadblock with unscrewing the handle screw. The grip on the front side had basically melted causing it to be loose, so the screw and the plastic part would rotate together. After trying several things, I gave up and took it to Ace hardware to find an extractor of some sort. Luckily, the guys there used several tools and managed to get the screw out....
Read more
More
$29.48
- Compare At:
-
$34.79
- You Save:
-
$5.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WP37001136
This cycling thermostat regulates exhaust temperature by switching the heater on and off to maintain proper drying heat. Replacing a failed thermostat restores consistent temperatures, helps auto-dry timing, and protects against fabric-damaging overheating.
- Controls the heating circuit to maintain target drying temperatures
- Provides temperature feedback for accurate auto-dry operation
- Common symptoms: long dry times, very hot drum/cabinet or scorching odors, auto-dry not advancing correctly, or no heat if the thermostat fails open
- Typically mounted on the blower housing to sense exhaust air temperature
Includes: 1 cycling thermostat. Install notes:
- Disconnect power; for gas dryers, also shut off the gas supply
- Access the thermostat (commonly on the blower housing); remove the necessary panel(s)
- Transfer wires one at a time to the new thermostat and mount it flat against the housing
- Reassemble, verify clear venting/airflow, and run a test cycle
Do-It-Yourself Stories from Customers like You
Heat was too high Douglas S. • Mesa , AZ • May 17, 2015
I went ahead and ordered the element, and the 2 different thermostats not knowing exactly which one might be the problem. My My Maytag opens from the front and it was actually pretty easy to get into. Also gave me the opportunity to vacuum out the inside of the dryer. Pop the top off, remove the wires that connect the door switch (noting the colors and placement), take off the 2 inside nuts that hols the fron on, pull it forward and lift it off, 3 inside screws to take out to inside lint part...
Read more
More
$81.71
- Compare At:
-
$98.05
- You Save:
-
$16.34
Genuine Lg part
By: Lg
Part Number: 6500JB2002T
This is a temperature sensor that monitors the internal temperature of the refrigerator compartment and sends readings to the main control board. The control board uses this data to regulate the compressor and cooling cycles. Replace this sensor if the refrigerator is too warm, too cold, runs continuously, or displays incorrect temperature readings.
Do-It-Yourself Stories from Customers like You
LG refrigerator not cooling but freezer worked after viewing videos and talking to AppliancePartsPros, I ordered the parts Robert C. • Flowery Branch , GA • November 30, 2019
I removed the defrost sensor assembly, installed a new one, it worked. Because of a shipping problem with FEDEX, Appliancepartspros resent the parts not once but twice. Needless to say, they are my go-to source for parts from now on.
Read more
More
$25.95
- Compare At:
-
$31.14
- You Save:
-
$5.19
Genuine Ge part
By: Ge
Part Number: WD24X10014
Replaces cracked, kinked, or chewed drain hose that carries wastewater from your dishwasher to household plumbing. Essential for proper drainage function.
Do-It-Yourself Stories from Customers like You
The dishwasher would not drain sometimes Thomas W. • Oceanside , CA • October 02, 2016
I replaced the pump drain assembly. The flapper valve was included in the assembly, so I did not need to order that. On previous repairs, the old drain hose was tricky to reinstall, so I replaced it and the hose clamp.The silverware basket had holes in the bottom and required replacement. I had some broken tine clips.
Read more
More
$38.39
- Compare At:
-
$45.68
- You Save:
-
$7.29
Genuine Whirlpool part
By: Whirlpool
Part Number: W10169961A
Traps grease particles to prevent buildup on blower and internal components. Replace when clogged or discolored. Verify fit with your model number.
Do-It-Yourself Stories from Customers like You
Nothing Beverly R. • Huntington , NY • February 24, 2017
I was just replacing my filter,on my vent.
Read more
More
$40.95
- Compare At:
-
$48.73
- You Save:
-
$7.78
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67004757
Freezer frosting over and fridge warm? This defrost thermostat senses evaporator temperature to control defrost cycles. DIY-friendly repair fix.
This part fixes the following symptoms
-
Freezer not defrosting
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Fridge not cooling freezer eval coil frosted over Tom A. • Ridgecrest , CA • June 10, 2016
Ended up being the defrost sensor. Ordered the heater and control board just in case. Started with the control board still didn't defrost. replaced the sensor and all is well.
Super helpful tech staff answered all my questions...
Read more
More
$74.95
- Compare At:
-
$89.94
- You Save:
-
$14.99
Genuine Ge part
By: Ge
Part Number: WE04X25195
Fix a dryer that won't heat properly or overheats with this thermostat. Senses exhaust temperature to regulate heat cycles and prevent damage.
More
$20.95
- Compare At:
-
$24.72
- You Save:
-
$3.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8573028
Dryer won't heat or stops heating? This high limit thermostat monitors heater housing temperature and cuts power if it overheats. Easy DIY fix.
Do-It-Yourself Stories from Customers like You
Noisy bearings coming from the washing machine excessive dry times with the dryer Steve E. • Rochester Hills , MI • January 03, 2019
Washing machine should have been an easy fix that I had done before but ran into problems with the upper bearing and the bearing diameter on the shaft (a no go situation). By the time I was able to get the bearing seated I had damaged the new bearing. Much to my surprise Cierra in customer service sent me out a new bearing kit. I was then able to get the washer up and running with the new bearing kit and motor stator replacement.
The dryer was a matter of replacing all of the electrical...
Read more
More
$50.57
- Compare At:
-
$60.18
- You Save:
-
$9.61