Icemaker Thermistor Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 241829001
Ice dispenser not working or making grinding noises? A worn auger drive bar often causes dispensing failures. Moderate DIY fix with video guidance.
Do-It-Yourself Stories from Customers like You
Ice bin had rusted parts which got on ice Daryl B. • Ephrata , PA • September 13, 2016
I replaced the 2 metal parts that were rusted out.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 241860804
Ice won't dispense or only comes out crushed? Your ice bin and auger assembly may be broken. This stores ice and drives it out for dispensing. 5-min fix.
Do-It-Yourself Stories from Customers like You
Producing no ice cubes all crushed ice. Kenneth K. • Manchester , PA • August 02, 2020
Replaced Ice Container and Auger Assembly.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X12079
Ice not dispensing or jamming? This bucket and auger assembly stores ice and moves it to the dispenser chute. Easy 15-minute installation, no tools needed.
Do-It-Yourself Stories from Customers like You
The ice maker was not dispensing ice needed a replacement ice bucket & auger assembly Vicki K. • Indialantic , FL • September 09, 2014
After searching for the ice bucket & auger assembly online, I found several websites that said they had the right replacement assembly for my refrigerator. I ordered one from another website first, but when it arrived it was not the right size-it was too big. The company told me to return the assembly but they didn't know if they had the assembly I needed. So...back to the internet to search again.
This time I came across AppliancePartsPros.com & searched on their website for the assembly. The...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR50X10025
Fixes warm fridge with cold freezer caused by frosted evaporator coils. This defrost thermostat regulates defrost cycles. Moderate DIY repair, 1-2 hours.
Do-It-Yourself Stories from Customers like You
Fridgerator was too warm 60 deg f found that evaperator was freezing over not letting cool air into fridge Christopher S. • St.Paul Park , MN • October 08, 2014
Well at first I thought the defroster element was the problem,so I was removing it to ohm it out and it broke upon removal.After replacing the element I was hoping that was the problem...After a week or so started having same problem with evap. freezing over.So I came back to your site to research what else could be the problem,and low and behold found an article about the defroster thermostat and a video on how to replace it.Ordered the thermostat and it was here within 2 days,replaced the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8573028
Dryer won't heat or stops heating? This high limit thermostat monitors heater housing temperature and cuts power if it overheats. Easy DIY fix.
Do-It-Yourself Stories from Customers like You
Noisy bearings coming from the washing machine excessive dry times with the dryer Steve E. • Rochester Hills , MI • January 03, 2019
Washing machine should have been an easy fix that I had done before but ran into problems with the upper bearing and the bearing diameter on the shaft (a no go situation). By the time I was able to get the bearing seated I had damaged the new bearing. Much to my surprise Cierra in customer service sent me out a new bearing kit. I was then able to get the washer up and running with the new bearing kit and motor stator replacement.
The dryer was a matter of replacing all of the electrical...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 240385201
Missing or cracked ice bin? This ice bucket stores ice from your refrigerator's ice maker. Simple pull-out replacement installs in seconds.
Do-It-Yourself Stories from Customers like You
Cracked door seal Kent H. • Vacaville , CA • September 20, 2017
Removed old seal and installed new seal. I laid down the new seal in the sun for about 20 minutes and it went in the grove extremely easy.
Read more
More
Genuine Ge part
By: Ge
Part Number: WE04X25195
Fix a dryer that won't heat properly or overheats with this thermostat. Senses exhaust temperature to regulate heat cycles and prevent damage.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303918810
Ice maker freezing over or heavy frost buildup? This defrost thermostat controls your refrigerator's defrost heater. Moderate DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
The icemaker not making ice. David S. • Lawrenceville , GA • July 17, 2021
Got the infamous icemaker freezing up problem so common to Frigidaire Gallery and Professional series refrigerators. I was also only getting the "OP" code on the diagnostic test 26, so I determined the defrost heater and/or the thermostat was probably bad. So, I went ahead and replaced both of them, as well as installed the updated air handler housing kit. What I didn't realize from the parts pictures was that the air handler kit was not only updated foam replacements, but it was also a...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67004757
Freezer frosting over and fridge warm? This defrost thermostat senses evaporator temperature to control defrost cycles. DIY-friendly repair fix.
This part fixes the following symptoms
-
Freezer not defrosting
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Fridge not cooling freezer eval coil frosted over Tom A. • Ridgecrest , CA • June 10, 2016
Ended up being the defrost sensor. Ordered the heater and control board just in case. Started with the control board still didn't defrost. replaced the sensor and all is well.
Super helpful tech staff answered all my questions...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10312301
This is the complete horizontal ice dispenser bucket assembly with crusher. It fits 22 cubic foot refrigerator models. For 20 cubic foot models order WP2209778. For 25 and 27 cubic foot models order WPW10312300.
Do-It-Yourself Stories from Customers like You
Auger that dispences the ice was not working like it should Louis R. • Bay City , TX • June 13, 2014
I ordered the complete assembly ice bucket and all
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP37001136
This cycling thermostat regulates exhaust temperature by switching the heater on and off to maintain proper drying heat. Replacing a failed thermostat restores consistent temperatures, helps auto-dry timing, and protects against fabric-damaging overheating.
- Controls the heating circuit to maintain target drying temperatures
- Provides temperature feedback for accurate auto-dry operation
- Common symptoms: long dry times, very hot drum/cabinet or scorching odors, auto-dry not advancing correctly, or no heat if the thermostat fails open
- Typically mounted on the blower housing to sense exhaust air temperature
Includes: 1 cycling thermostat. Install notes:
- Disconnect power; for gas dryers, also shut off the gas supply
- Access the thermostat (commonly on the blower housing); remove the necessary panel(s)
- Transfer wires one at a time to the new thermostat and mount it flat against the housing
- Reassemble, verify clear venting/airflow, and run a test cycle
Do-It-Yourself Stories from Customers like You
Heat was too high Douglas S. • Mesa , AZ • May 17, 2015
I went ahead and ordered the element, and the 2 different thermostats not knowing exactly which one might be the problem. My My Maytag opens from the front and it was actually pretty easy to get into. Also gave me the opportunity to vacuum out the inside of the dryer. Pop the top off, remove the wires that connect the door switch (noting the colors and placement), take off the 2 inside nuts that hols the fron on, pull it forward and lift it off, 3 inside screws to take out to inside lint part...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10324090
Ice won't dispense or jams in chute? Cracked bin or broken auger blades stop ice flow. This ice bin assembly restores dispensing. Easy DIY, no tools.
Do-It-Yourself Stories from Customers like You
Auger in ice bin broken. John N. • Cincinnati , OH • August 03, 2018
Replaced ice bin assy.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR30X10131
The complete ice-making unit typically located in the freezer compartment that produces, harvests, and dispenses ice cubes. Replace when ice production stops entirely, produces malformed ice, makes unusual noises, or leaks water.
Do-It-Yourself Stories from Customers like You
Water dripping into bucket forming an ice dam Suzanne S. • Long Beach , CA • February 11, 2016
I broke the ice bucket when the problem first started as I kept trying to get the ice out of the dispenser. I replaced the Icemaker Asembly in less than 5 minutes, 1 screw and that was that. Everything works great and my dispenser is back in action. I did have a repair man come out to correctly diagnose the issue as the parts were expensive and I wanted to make sure it was not a leak somewhere, but indeed the mechanism. He charged me 40 to confirm the issue and I ordered the parts. Could...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2317251
Fixes ice dispenser jams, clogs, and poor delivery. Complete assembly includes auger and blades. Quick 5-minute swap restores smooth ice dispensing.
Do-It-Yourself Stories from Customers like You
Ice maker quit working. Donald S. • Pass Christian , MS • July 16, 2022
Purchased a new ice container and drive shaft.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406653
This sensor harness connects the dryer's moisture sensor bars to the main wiring, helping the control or timer read moisture levels so Auto Dry cycles can advance and deliver consistent, reliable drying performance.
- Provides the electrical path between the moisture sensor bars and the control/timer
- Enables the dryer to sense wet fabrics and adjust or advance Auto Dry cycles
- A damaged or open harness can cause Auto Dry to not advance, run too long, or stop early
- Contribute to inconsistent dry times or a "Sensing" indicator that behaves abnormally
What's included: One sensor wire harness Install notes:
- Disconnect power before servicing
- Access the sensor bars at the front bulkhead; note wire routing and clip locations
- Transfer routing/clips from the old harness; connect to both sensor bars and the main harness plug, ensuring snug terminals and clear wire paths
- Restore power and run an Auto Dry test; inspect/clean the sensor bars and check harness continuity
Do-It-Yourself Stories from Customers like You
Dryer turning off on auto cycle with clothes still damp Mark F. • Topsham , ME • January 31, 2015
Replaced 3 low cost parts as advised by Appliance Parts Pros. Saved the labor costs by troubleshooting and replacing parts with their great videos. Works like new, and took 15 minutes to complete the repair.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10422851
Ice not dispensing or only partially crushing? The ice dispenser auger moves ice from bin to chute. DIY-friendly repair, typically 30 minutes.
Do-It-Yourself Stories from Customers like You
Ice maker auger not working right Betty H. • Tahlequah , OK • April 03, 2014
Had to replace the auger. The auger on my ice maker was made of plastic and had broken pieces off it. The new one is made of metal and seems to work much better. Was a fairly simple repair. However pay close attention when disassembling, I recommend using your cell phone and snap a pic of the different stages as I became a little confused when putting it back together. Ordered the part and it was here the next day. I'm very happy to have my ice coming down the chute again. By the way, I'm a 70...
Read more
More