Yard-Main Small Engine Safety Switch Parts
Genuine Bosch part
By: Bosch
Part Number: 00629722
This is a spark ignition switch used on a range or cooktop that controls the electric spark to ignite the surface burners when the control knob is turned. It connects to the burner igniter circuit and signals when to fire the spark module. Replace this switch if your burners won't ignite, the spark clicks continuously even after the flame is lit, or the igniter fails to spark when the knob is engaged.
Do-It-Yourself Stories from Customers like You
My dryer started showing error codes. I had the repair company come to look at the oven, they told me that the oven was not repairable. Dominick M. • Tinton Falls , NJ • December 12, 2021
I ordered all the parts from AppliancePartsPros.com and in two days I had every new part that was. Ordered. After being told from the appliance repair company that I wouldn’t get parts for months. I received all parts within 4 days, 19 different parts!
Read more
More
$63.69
- Compare At:
-
$75.79
- You Save:
-
$12.10
Genuine Bosch part
By: Bosch
Part Number: 00499500
This pressure chamber is part of the water level sensing system in the dishwasher. It connects to the tub and the water level sensor, using air pressure changes to detect how much water has filled the machine so it knows when to stop filling. Replace this component if the dishwasher overfills, underfills, or displays water level error codes during a wash cycle.
Do-It-Yourself Stories from Customers like You
Internal water leak on a bosch shu5316 uc/06 dishwasher David B. • Aspinwall , PA • March 13, 2015
Using instructions I obtained over the internet, I first removed the DW's bottom cover panels so I could look inside the DW (with a flashlight) while it was running. I had to put their dishwasher through several wash cycles before I could pinpoint the location of the leak. (The water appeared to be coming from above on the left side of the DW, near the top, rear of the DW's blue "Pressure Chamber." Thinking that the problem likely lay in either a malfunctioning Pressure Chamber or in a...
Read more
More
$60.55
- Compare At:
-
$71.45
- You Save:
-
$10.90
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3147265
Exhaust fan won't turn off or stuck on? This rocker switch restores reliable blower control. Simple 5-minute fix—just disconnect wires and snap in new.
Do-It-Yourself Stories from Customers like You
Broken exhaust fan rocker switch on jenn air Howard R. • Madison , WI • October 19, 2016
First check to see how many leads your switch has before ordering - I ordered before I took things apart, and got an incorrect 2 lead version when I needed a 3. On starting the repair, at first thought I might have to take apart console - but happily, no. After turning off power, just carefully pried the old switch out (putty knife to depress plastic clips above & below), pulled out gently (not much slack on wires) and removed the old wires by gently easing them off the broken switch with a...
Read more
More
$72.95
- Compare At:
-
$86.08
- You Save:
-
$13.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74011489
Fixes burner that won't heat or indicator light stuck on. This infinite switch controls surface burner power and heat settings. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Knob twisted off Glenn M. • Aurora , OR • August 20, 2018
Replaced switch
Read more
More
$78.75
- Compare At:
-
$93.71
- You Save:
-
$14.96
Genuine Samsung part
By: Samsung
Part Number: DG44-01003A
This is a selector switch that controls a surface burner element on an electric range. It allows you to select different heating zones or power levels for a multi-ring burner. Replace this switch if the burner does not respond to the control knob, only heats on certain settings, or if the switch fails to cycle the element properly.
Do-It-Yourself Stories from Customers like You
Burner indicator light stays on always Joseph S. • Waldron , AR • August 02, 2015
Replaced DG44-01003A (AP4336838) Energy regulator. Fixed it with no problem.
It was the the big burner on my Samsung range that had three settings for pot size.
Read more
More
$197.95
- Compare At:
-
$235.56
- You Save:
-
$37.61
Genuine Broan part
By: Broan
Part Number: SV03501
Range hood fan won't change speeds or stuck on one setting? This speed control switch lets you adjust ventilation levels for proper smoke and odor removal.
More
$161.95
- Compare At:
-
$194.34
- You Save:
-
$32.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10268911
Washer overfilling or underfilling? The water level pressure switch senses tub pressure to control fill cycles. DIY repair in 20 minutes or less.
Do-It-Yourself Stories from Customers like You
My washer was overfilling Steve T. • Warwick , NY • January 25, 2016
Called appliance parts and asked, what was the fix. Told it was fill switch and that I could order it.
I was amazed that I received the part the next day without even asking for overnight delivery. I installed the part in less then 20 min. Problem fixed..
Read more
More
$111.44
- Compare At:
-
$133.73
- You Save:
-
$22.29
Genuine Frigidaire part
By: Frigidaire
Part Number: 316445500
Oven light stays on or won't turn on when door opens? This door-activated switch restores automatic light control. Easy 15-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Oven door wouldn't lock & oven light stayed on Michael B. • Dubois , PA • November 26, 2015
Replaced light switch
Read more
More
$59.50
- Compare At:
-
$70.21
- You Save:
-
$10.71
Genuine Whirlpool part
By: Whirlpool
Part Number: W10702726
Dryer won't start but lights work? A faulty door switch prevents operation. This replacement switch restores normal function in under 10 minutes.
Do-It-Yourself Stories from Customers like You
Broken door switch Jason D. • Troy , IL • March 23, 2019
Ordered replacement, easy swap out. Less than 10 minutes.
Read more
More
$60.52
- Compare At:
-
$72.02
- You Save:
-
$11.50
Genuine Ge part
By: Ge
Part Number: WB24X10110
Fix a range hood fan that won't turn on or off, or lights that don't respond to controls. This motor/lamp switch restores on/off control. Moderate DIY.
Do-It-Yourself Stories from Customers like You
Broken fan switch William S. • Marco Island , FL • October 02, 2015
Biggest problem was trying to get at the switch to replace it. Had to remove two allen head screws to gain access on the back panel of the range hood. The allen heads were very small fortunately I had a number bits from my old electric screw driver that allowed me to remove them. Even then I had to snake my way cutting my hand to get to the switch to replace it.
The positive part the switch was over $25 less the if purchased directly from GE through Appliance Pros.
Read more
More
$102.95
- Compare At:
-
$123.54
- You Save:
-
$20.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22004243
Washer won't start or spin? A faulty lid switch prevents operation when the lid position isn't detected. Simple clip-in replacement, typically done in 10 minutes.
Do-It-Yourself Stories from Customers like You
The washer quit working Andrew S. • Franklinville , NY • March 27, 2014
Took off the back of the top pushed the switch forward and lifted it out after I unplugged it. Put the new switch in the opposite of how I took it out, plugged in the wires put the back on and finished my laundry.
Read more
More
$75.95
- Compare At:
-
$91.14
- You Save:
-
$15.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4456901
Fix sparking or non-working igniter switches with a new switch harness. Connects control switches to cooktop wiring. Moderate DIY repair, 1-2 hours.
Do-It-Yourself Stories from Customers like You
Not igniting in one of the burners in my cooktop Ben G. • Oakley , CA • February 09, 2020
I replaced the igniter module.
Read more
More
$117.54
- Compare At:
-
$139.87
- You Save:
-
$22.33
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3191049
Fix a burner that won't heat or has no temperature control by replacing this 6-inch element switch. Restores smooth low-to-high heat adjustment in 30 minutes.
Do-It-Yourself Stories from Customers like You
2 of 4 burners lost variable heat finction James R. • Centreville , VA • August 04, 2015
Trial and error only cooktop unit. Everything mounted into the counter and needed to pull unit out. I figured it was a control switch or the burner itself. Based on costs, I took the less expensive route and replaced the 2 known malfunctioning switches. All on-line videos said it was a 2-3 hour process to replace. I finished mine in less than 30 minutes. Turned breaker back on and it works like a charm. 30 years old and still going strong.
Read more
More
$83.36
- Compare At:
-
$98.36
- You Save:
-
$15.00
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74008248
Burner won't heat or dual-ring stops working? This dual infinite switch restores power control to both circuits of your cooktop element. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
I was hanging a light above the cooktop and put my foot on the edge of the glass and my wife heard the glass snap Robert C. • Lyman , WY • February 04, 2017
I looked up the parts on appliancepartspros.com, made the order, and was amazed how fast the parts arrived! I was able to watch their repair video and it showed me how to change it step by step.
Read more
More
$63.65
- Compare At:
-
$81.36
- You Save:
-
$17.71
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10192994
This replacement switch restores reliable on/off control for the specific function it serves in your appliance. A failing switch can cause that feature to stop responding or behave intermittently; replacing it brings normal operation back.
- Opens and closes the electrical circuit to the associated component when actuated
- Provides consistent, safe control of the feature it operates
- Typical failure symptoms: function won't turn on, won't turn off, or works only intermittently
- Physical clues can include a loose or sticky actuator, heat discoloration, or visible arcing damage
What's included: 1 switch Install notes:
- Disconnect power at the breaker before servicing; allow hot surfaces to cool
- Access the switch per your model's service/parts diagram and note wire positions
- Transfer wires one at a time to the new switch; secure any mounting hardware
- Verify continuity and test operation before reassembly; replace any damaged connectors
Do-It-Yourself Stories from Customers like You
Washer would not start running thought door was open C. D. • Austin , TX • April 28, 2017
This switch fixed a very frustrating problem, 75% of the time the washer refused to run because it "thought" the door was open. Replacing the switch was a very easy, in expensive, 5-min fix. The washer runs like new.
When taking off the gasket, there is a metal ring that holds the gasket in place. It is connected by a spring. Find the spring, put a flat head screwdriver between the spring and the gasket and pull the ring off. The gasket will then peel back, giving you access to the switch and...
Read more
More
$36.95
- Compare At:
-
$43.60
- You Save:
-
$6.65
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY704512
If your gas burner won't light or clicks continuously, this igniter switch mounts on the valve stem to restore reliable ignition. Takes 5 minutes to replace.
Do-It-Yourself Stories from Customers like You
Front right burner would not light all other burners worked fine Kurt Z. • Austin , TX • February 06, 2015
By replacing the switch, the front right burner correctly turned on the igniter and worked. Repair took about 5 minutes. Very easy to do.
Read more
More
$64.70
- Compare At:
-
$77.64
- You Save:
-
$12.94