Igniter Bake Parts

• Won't start
• No heat
• Little to no heat when broiling
• Oven not heating evenly

We were getting an intermittent F19 code on our lower oven mainly. This code gets triggered when the oven fails to heat up to a minimum temperature within a specific amount of time. I figured this was being caused by an ignition failure so I bought this new ignitor. As it turns out, if you have a double oven then you will have two ignitors. Just keep that in mind in case you are thinking about replacing both or you are seeing errors in both ovens. The ignitor in the lower oven is located below... Read more

• Little to no heat when baking
• Oven not heating evenly
• Won't start

Replaced lower and upper element. Internet research suggested it was the control board. Thankfully it was a much quicker and cheaper fix. Read more

• Little to no heat when broiling
• Oven not heating evenly
• Won't start
• Element will not heat

I cannot not sing the praises of this company & their helpful & fast service. I am going to post the online site address w/my praises on my facebook page for my friends that live on ranches many miles from appliance repair shops & towns. The Oven in our house is for sure over 20 yrs old it was in this home when we bought it, the home is 33 yrs old & the Oven is a Wall Oven, there is not room for a standard Oven in this Kitchen. The Oven itself still looks very nice. About 8 yrs ago or more... Read more

• Element will not heat

I went to a local stove parts store to find a replacement. The store ordered the element for me and promised that it would arrive the next day. I waited for seven 'working' days,but the part never came. So I went online, and found the part in AppliancePartsPros.com. I ordered it in the evening of November 5, 2014, and the part was delivered the next day, November 6 at 11.08AM! Fantastic! I don't know how they could deliver that fast. But clearly, nobody could beat that service. The part fits... Read more

• Oven not heating evenly
• Little to no heat when baking
• Element will not heat

I began by turning off the breaker. I then removed the screws securing the bake element. I immediately noticed only one side was wired and the other side was burned off. The wire for the burned off section had fallen through the hole in the back of the oven. I tried fishing it out to no avail. I removed two side trim screws, the side trim pieces, and two screws holding the built-in oven into the wall. I was able to slide the oven out and onto a square stool that was the correct height. I... Read more

Two screws in the front, lifted top, removed old burner, replaced with new one. The trickiest part was getting the wires connections loose from the old burner. Read more

• Won't start
• Little to no heat when broiling
• No heat
• Oven not heating evenly

It was Holy Thursday and my husband turned on the oven to make our traditional lamb. Being busy in the kitchen with other things, I glanced over at the stove once or twice. Eventually it dawned on me that time had passed but the display still said 150° which is the default. I opened the oven and it was stone cold. We tried unplugging it, turning it off and trying again. It didn't work. My husband hauled out the roaster. For Easter, I bake nutrolls because it makes me feel connected to my... Read more

• Little to no heat when broiling
• Gas igniter glows, but will not light
• Gas smell
• Little to no heat when baking

I used the little video clip shown under the part and replaced it myself. Read more

• Oven not heating evenly
• Oven is too hot
• Little to no heat when baking
• Element will not heat

Ordered spare part that actually fit my oven. Arrived in three days from next state over. Unplugged power cord, removed racks, used 1/4" socket on ratchet with 6 inch extension to remove two sheet metal screws at lower back of oven. Pulled old element out 2 inches then tilted front of element up 45 degrees for spade connectors to clear holes at back of oven. Once clear, pulled element forward until the white #16 wires pulled through the openings in the oven (inside at the back). By hand, gently... Read more

• Little to no heat when baking
• Oven not heating evenly
• Won't start

One day, while trying to roast chicken on the convection roast setting, my Electrolux oven stopped heating properly. I tried the broil setting and the top electric heating element worked fine. I then tried the bake setting and found that the bottom element wasn't working at all. I Googled the problem. The info I found said that the issue was probably that the bake element needed to be replaced. It said to look for a break or burned through spot on the element. If it appeared OK, remove it... Read more

Ordered part, reviewed several videos demonstrating replacement of burner. Read more

• Little to no heat when baking
• Oven not heating evenly
• Oven is too hot
• Won't start

Took out old element,got part number and look for the cheapest price online, Appliance Parts Pro could not be beat... order part be number, easy to match, came in fast and put in element, only needed a 5/16 nutdriver to take it out and put it in,unpluged wires and bent just a little to keep one on left and one right from getting mixed up and pluged up new element and ran in the 2 screws,easy job, dont get no easier.. Thanks again Appliance Parts Pro Read more

• Little to no heat when baking
• Oven not heating evenly
• Element will not heat
• Oven is too hot

I finally found the right serial number and found the part at Appliance Parts Pros. I was skeptical that they would send the element that had the correct rear brace fixture. when it came 2 days later i opened the box the Part was correct and it took about 15 minutes to replace since there are only two screws. My oven works fine now. THX Read more

On my Jenn-Air downdraft range, the oven stopped heating. The broiler still worked. So pulled the pan off the bottom so I could see and found the igniter wasn't glowing to start the gas. I had replaced the full electronic control panel using Appliance Parts Pros so knew they had the full breakdown of parts for my model. I found the igniter and ordered. But frankly, I wasn't sure about doing the repair myself. It looked easy enough from videos and discussions here. Still, dealing with the... Read more

I replaced the Oven Igniter. After ensuring that it was the igniter, by turning on the stove and taking out the oven bottom. Watch if it turns red. If not, then either the wiring is faulty, or the igniter went bad. The bulb was due to a loose and broken light bulb, can't use any normal bulb, these ones are specially made to withstand the heat. And the oven bottom was warped due repeatedly heating up and cooling down over the years. It took a fair bit of time to get the new one in, since it was... Read more

I was able to remove the culprit part and replace it with a new one. Tested the unit for normal operation unit is working properly. Read more