Leak Blower Spark Plug Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304513609
Dryer making loud rumbling or tapping noise? A worn or damaged blower wheel assembly is often the cause. Moderately difficult repair for most DIYers.
Do-It-Yourself Stories from Customers like You
Very noisy when turned on. Paul P. • Mendon , MA • October 22, 2022
I replaced the Blower Wheel Assembly.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11032769
Fix a dishwasher dispenser that won't open, close, or is leaking detergent. This dispenser releases soap and rinse aid at the right time. 45-minute DIY.
Do-It-Yourself Stories from Customers like You
Kitchen aid dishwasher soap dispenser stopped working Emily P. • Poolesville , MD • February 08, 2016
As a homeowner, I love that I can just type my model number into Appliance Parts Pros website and find a listing/diagram of the entire unit. So when my dispenser on my dishwasher broke, I just ordered a new one. I use You Tube to watch videos on the specific repair, and then VOILA! I do the repair myself, saving at least a hundred dollars in a repair persons service call charge! While this repair was for my dishwasher, I've also fixed my washing machine, dryer, and steam humidifier.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134690800
Dryer not drying or taking too long? A worn blower wheel reduces airflow, causing poor drying performance. Moderate DIY repair in 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Noisy electric dryer on startup John B. • Wenatchee , WA • January 29, 2018
Disassembled dryer. Installed new belt, drum rollers, idler arm and blower.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD12X10163
Detergent door won't stay closed or latch broken? This dishwasher dispenser releases soap and rinse aid during cycles. DIY repair in 20-30 minutes.
This part fixes the following symptoms
-
Will not dispense detergent
See more...
Do-It-Yourself Stories from Customers like You
Detergent and rinse aid dispenser stopped working Donald L. • Rochester , MI • April 18, 2020
Bought the replacement dispenser from APPros.com (of course). The video shows a front control panel, and our dishwasher has the 'hidden' control panel on the top of the door. So here's the difference:
1) You need to take out all the screws, except the two near the latch at the top. The other video shows only taking out the bottom six screws because the remainder of the screws hold the front control panel. I used a couple paint cans with rags on top to hold the corners of the door when...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11497304
The Blower Wheel is an OEM part for Whirlpool dryers. It is essential for circulating air through the dryer's drum, helping to efficiently and evenly dry clothes by moving heated air past the tumbling laundry. This component is crucial for maintaining the performance and energy efficiency of your dryer.
Symptoms of a bad Blower Wheel include:
- Unusual noises, such as rattling or thumping, indicating a loose or damaged wheel.
- Reduced airflow, leading to longer drying times or clothes not drying completely.
- Excessive vibrations during operation, which can also affect other components.
Causes of a bad blower wheel can include physical damage from foreign objects hitting the wheel, wear and tear from regular use, or accumulation of lint and debris that unbalances the wheel.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Blower wheel had broken at the shaft William K. • Apopka , FL • April 04, 2014
I removed the front panel of the dryer and the metal cover over the blower wheel. Removed the lock ring and clamp. Removed the old wheel and placed the new wheel on the shaft. I thoroughly cleaned all the lint around the area and inside the front cover. I resealed the metal cover over the blower and reinstalled the front cover. Dryer works great. Easy fix, I spent more time thoroughly cleaning all the lint.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 285868
Seals filter housing to prevent leaks and maintain proper water flow in your washer. Replace if missing, cracked, or causing leaks. Verify fit by model.
Do-It-Yourself Stories from Customers like You
Whirlpool lsr7233eq0 washing machine was leaking out the bottom Jerald F. • Laud Lakes , FL • April 05, 2015
I had previously replaced the pump about 1 year ago. That was not the problem. Still leaked the same way - intermittently, but always in the center of the washer onto the floor. None of the hoses were leaking - no evidence of corrosion or water mineral residue at any of the hose fittings. So, it must have been something else. I studied the parts diagram for the washer tub assembly and concluded the source of the leak almost had to be the outer tub's Centerpost Gasket. It was really the...
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00166630
Detergent dispenser door won't stay closed? This latch secures the detergent cup during wash cycles. Simple DIY repair with video guidance included.
Do-It-Yourself Stories from Customers like You
Soap dispenser did not stay closed Petra G. • West Chester , PA • October 18, 2014
After having seen the video I installed the new lid and it worked.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD12X10122
Replacement cap that seals the rinse aid dispenser on your dishwasher door. Replace if cracked, broken, warped from heat, or missing to prevent leaks.
Do-It-Yourself Stories from Customers like You
The vent part was broken and woulkd not stay in its place and kept falling out the rinse aid cap was broken also and ended up falling on the he4ating element and burnt Martha R. • Spring , TX • February 08, 2015
This was very simple. Thgey just popped back into place asnd the cap screws in.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10199696
Broken detergent door latch or dispenser won't close? This dishwasher dispenser assembly fixes soap release issues. DIY repair takes about 1 hour.
Do-It-Yourself Stories from Customers like You
The dispenser door catch had broken Herbert S. • Longmont , CO • September 22, 2014
Since door latch parts are not available, I replaced the entire dispenser assembly.
While waiting for the part to arrive, I watched the installation video, which made the installation quite easy.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 56000
Fix no airflow or squealing dryer with this blower wheel replacement. Restores proper air circulation through drum and exhaust. Moderate DIY repair.
This part fixes the following symptoms
-
No heat or not enough heat
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Motor ran but drum would not turn dryer motor pulley on motor shaft was stripped i found metal shavings under pulley that is attached to motor shaft Ysidro M. • Mesa , AZ • January 25, 2015
Since finding out pulley on motor is factory installed, I had to order a new motor with new pulley on it. I could not remove old blower wheel from old motor, no matter how hard I tried so I had to purchase new blower wheel and new blower housing. I am super happy finding Appliancepartspros.com the prices, and my experience was great! I basically removed everything step by step, and then replaced with the new parts step by step. I had help by watching videos that were provided online before and...
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DC67-00180B
Fix loud grinding or squealing noises from a broken blower wheel. Restores proper airflow in your dryer. DIY-friendly repair, typically 30 minutes.
This part fixes the following symptoms
-
Too hot
-
Takes too long to dry
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Dryer was making loud rubbing noise Jennifer D. • Milton , GA • August 15, 2016
Did google search and found youtube diagnostic and repair video. Blower wheel was warped and rubbing on the cover. We ordered a new blower wheel and followed youtube instructions to install new blower wheel.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB26X10038
Turntable stopped turning or making grinding noise? This motor rotates the glass plate for even cooking. Easy 5-10 minute DIY fix with basic tools.
Do-It-Yourself Stories from Customers like You
Microwave turntable not working Michael B. • Wake Forest , NC • June 24, 2014
I fix this problem by purchasing a new turntable motor. Simple 5 minute installation.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8184109
The Motor Spacer is an OEM part for Whirlpool microwaves. It is designed to support and position the turntable motor, ensuring it stays aligned and functions correctly. This spacer helps maintain the stability of the turntable, allowing even and consistent heating of food.
Causes of a bad motor spacer can include wear and tear over time, physical damage from heavy use, or misalignment due to accidental impacts. Regular inspection and maintenance can help identify issues before they lead to motor malfunction.
Symptoms of a bad motor spacer include:
- The turntable not rotating properly
- Unusual noises coming from the turntable area
- Inconsistent heating or cooking of food
- The turntable being unsteady or wobbling
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The turntable in the microwave stopped going around. David J. • Happy Valley , OR • November 20, 2017
Very easy fix. Unplugged microwave, then lowered bottom panel, removed the two leads to the turntable motor, removed two screws attached to motor, removed old motor, put new spacer on motor stem, installed motor with same two screws, reattached the two wires, reattached panel ( after cleaning all the grease that built up over the last 6 years), plugged microwave in and good as new! Took me twenty minutes. Note: the two screws holding the motor were not Phillips like those holding the panel. So...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB02X11025
The fan blade circulates air and removes cooking odors and steam through the range hood's ventilation system. Located inside the range hood, replace it when the fan makes excessive noise, vibrates abnormally, or doesn't move air effectively.
Do-It-Yourself Stories from Customers like You
I broke the fan on my range hood Tamara R. • Carlin , NV • November 13, 2014
I found the one at great price at Appliance Parts Pro. Fan came fast! TaDa fixed within days! Thanks!!
Read more
More
Genuine Ge part
By: Ge
Part Number: WD16X10011
Detergent cup won't stay closed? This dispenser latch secures the detergent cup during wash cycles. Direct replacement part with video guide available.
Do-It-Yourself Stories from Customers like You
Soap dispenser wouldn't close door kept falling down Graeme M. • Branford , CT • October 07, 2017
First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then...
Read more
More
Genuine Ge part
By: Ge
Part Number: WD16X313
Dishwasher detergent cup won't stay closed or won't open fully? This soap dispenser lever controls detergent release. DIY repair in 15 minutes.
Do-It-Yourself Stories from Customers like You
Soap dispenser wouldn't close door kept falling down Graeme M. • Branford , CT • October 07, 2017
First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then...
Read more
More