Briggs Stratton Small Engine Start Switch Parts
Genuine Samsung part
By: Samsung
Part Number: DG44-01003A
This is a selector switch that controls a surface burner element on an electric range. It allows you to select different heating zones or power levels for a multi-ring burner. Replace this switch if the burner does not respond to the control knob, only heats on certain settings, or if the switch fails to cycle the element properly.
Do-It-Yourself Stories from Customers like You
Burner indicator light stays on always Joseph S. • Waldron , AR • August 02, 2015
Replaced DG44-01003A (AP4336838) Energy regulator. Fixed it with no problem.
It was the the big burner on my Samsung range that had three settings for pot size.
Read more
More
$197.95
- Compare At:
-
$237.54
- You Save:
-
$39.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74011489
Fixes burner that won't heat or indicator light stuck on. This infinite switch controls surface burner power and heat settings. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Knob twisted off Glenn M. • Aurora , OR • August 20, 2018
Replaced switch
Read more
More
$78.75
- Compare At:
-
$94.50
- You Save:
-
$15.75
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10268911
Washer overfilling or underfilling? The water level pressure switch senses tub pressure to control fill cycles. DIY repair in 20 minutes or less.
Do-It-Yourself Stories from Customers like You
My washer was overfilling Steve T. • Warwick , NY • January 25, 2016
Called appliance parts and asked, what was the fix. Told it was fill switch and that I could order it.
I was amazed that I received the part the next day without even asking for overnight delivery. I installed the part in less then 20 min. Problem fixed..
Read more
More
$111.44
- Compare At:
-
$133.73
- You Save:
-
$22.29
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22004243
Washer won't start or spin? A faulty lid switch prevents operation when the lid position isn't detected. Simple clip-in replacement, typically done in 10 minutes.
Do-It-Yourself Stories from Customers like You
The washer quit working Andrew S. • Franklinville , NY • March 27, 2014
Took off the back of the top pushed the switch forward and lifted it out after I unplugged it. Put the new switch in the opposite of how I took it out, plugged in the wires put the back on and finished my laundry.
Read more
More
$75.95
- Compare At:
-
$90.38
- You Save:
-
$14.43
Genuine Frigidaire part
By: Frigidaire
Part Number: 316445500
Oven light stays on or won't turn on when door opens? This door-activated switch restores automatic light control. Easy 15-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Oven door wouldn't lock & oven light stayed on Michael B. • Dubois , PA • November 26, 2015
Replaced light switch
Read more
More
$59.50
- Compare At:
-
$70.80
- You Save:
-
$11.30
Genuine Whirlpool part
By: Whirlpool
Part Number: W10702726
Dryer won't start but lights work? A faulty door switch prevents operation. This replacement switch restores normal function in under 10 minutes.
Do-It-Yourself Stories from Customers like You
Broken door switch Jason D. • Troy , IL • March 23, 2019
Ordered replacement, easy swap out. Less than 10 minutes.
Read more
More
$60.52
- Compare At:
-
$72.02
- You Save:
-
$11.50
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4456901
Fix sparking or non-working igniter switches with a new switch harness. Connects control switches to cooktop wiring. Moderate DIY repair, 1-2 hours.
Do-It-Yourself Stories from Customers like You
Igniter not working. Adrian H. • Totowa , NJ • January 18, 2022
Replaced the Spark Module and the Wire Harness. Works like new.
Read more
More
$117.54
- Compare At:
-
$141.05
- You Save:
-
$23.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10192994
This replacement switch restores reliable on/off control for the specific function it serves in your appliance. A failing switch can cause that feature to stop responding or behave intermittently; replacing it brings normal operation back.
- Opens and closes the electrical circuit to the associated component when actuated
- Provides consistent, safe control of the feature it operates
- Typical failure symptoms: function won't turn on, won't turn off, or works only intermittently
- Physical clues can include a loose or sticky actuator, heat discoloration, or visible arcing damage
What's included: 1 switch Install notes:
- Disconnect power at the breaker before servicing; allow hot surfaces to cool
- Access the switch per your model's service/parts diagram and note wire positions
- Transfer wires one at a time to the new switch; secure any mounting hardware
- Verify continuity and test operation before reassembly; replace any damaged connectors
Do-It-Yourself Stories from Customers like You
Washer would not start running thought door was open C. D. • Austin , TX • April 28, 2017
This switch fixed a very frustrating problem, 75% of the time the washer refused to run because it "thought" the door was open. Replacing the switch was a very easy, in expensive, 5-min fix. The washer runs like new.
When taking off the gasket, there is a metal ring that holds the gasket in place. It is connected by a spring. Find the spring, put a flat head screwdriver between the spring and the gasket and pull the ring off. The gasket will then peel back, giving you access to the switch and...
Read more
More
$36.95
- Compare At:
-
$43.97
- You Save:
-
$7.02
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY704512
If your gas burner won't light or clicks continuously, this igniter switch mounts on the valve stem to restore reliable ignition. Takes 5 minutes to replace.
Do-It-Yourself Stories from Customers like You
Front right burner would not light all other burners worked fine Kurt Z. • Austin , TX • February 06, 2015
By replacing the switch, the front right burner correctly turned on the igniter and worked. Repair took about 5 minutes. Very easy to do.
Read more
More
$64.70
- Compare At:
-
$76.35
- You Save:
-
$11.65
Genuine Frigidaire part
By: Frigidaire
Part Number: 134422700
This is a factory switch used in the appliance's control/safety circuit. Replacing a worn or failed switch restores reliable signaling so the selected function engages properly and the unit responds consistently to user inputs and status conditions.
- Provides an electrical on/off signal to the control or safety circuit
- If faulty, selected functions may not activate or may be intermittent
- Can trigger error codes related to a switch input, depending on model
What's included: 1 switch Install notes:
- Disconnect power before servicing; turn off gas/water if applicable
- Note/photograph wire locations and transfer connectors one at a time
- Verify actuator alignment and secure mounting before reassembly
- After installation, run a test cycle to confirm proper operation
This part fixes the following symptoms
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
The stem of the original switch had been twisted off Benjamin R. • Seattle , WA • April 15, 2019
I removed two sheet metal screws to remove the panel above the washing machine lid. That exposed four more phillips drive sheet metal screws, after removing those the dashboard control panel is held by two smaller black screws slightly recessed in the lower corners. This allowed the panel to be pulled down from the top, revealing the back of the switch. At this point I took a picture of the wiring connections with my cell phone to make sure I put them on the new switch in the same...
Read more
More
$84.95
- Compare At:
-
$100.24
- You Save:
-
$15.29
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304528828
Fix intermittent burner failures or electrical issues with this range wiring harness. Restores power flow when connections are loose, burnt, or broken.
More
$80.95
- Compare At:
-
$95.52
- You Save:
-
$14.57
Genuine Whirlpool part
By: Whirlpool
Part Number: W11087492
The Switch is an OEM replacement part for Whirlpool refrigerators. It is designed to control the water dispensing function of your refrigerator, providing a convenient and easy way to access filtered water. It is responsible for activating the water flow when pressed, allowing you to dispense water into your glass or container.
A bad refrigerator water dispenser switch can occur due to wear and tear, physical damage, or electrical malfunction. If you notice symptoms such as the switch not responding when pressed, inconsistent water flow, or a complete lack of water dispensing, it may be time to replace the switch.
Symptoms of a bad refrigerator water dispenser switch include:
- Switch not responding when pressed
- Inconsistent water flow
- Lack of water dispensing
Restore your refrigerator's water dispenser by replacing the faulty or damaged water dispenser switch with this genuine OEM part.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
More
$28.43
- Compare At:
-
$33.55
- You Save:
-
$5.12
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3191049
Fix a burner that won't heat or has no temperature control by replacing this 6-inch element switch. Restores smooth low-to-high heat adjustment in 30 minutes.
Do-It-Yourself Stories from Customers like You
2 of 4 burners lost variable heat finction James R. • Centreville , VA • August 04, 2015
Trial and error only cooktop unit. Everything mounted into the counter and needed to pull unit out. I figured it was a control switch or the burner itself. Based on costs, I took the less expensive route and replaced the 2 known malfunctioning switches. All on-line videos said it was a 2-3 hour process to replace. I finished mine in less than 30 minutes. Turned breaker back on and it works like a charm. 30 years old and still going strong.
Read more
More
$83.36
- Compare At:
-
$98.36
- You Save:
-
$15.00
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74008248
Burner won't heat or dual-ring stops working? This dual infinite switch restores power control to both circuits of your cooktop element. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
I was hanging a light above the cooktop and put my foot on the edge of the glass and my wife heard the glass snap Robert C. • Lyman , WY • February 04, 2017
I looked up the parts on appliancepartspros.com, made the order, and was amazed how fast the parts arrived! I was able to watch their repair video and it showed me how to change it step by step.
Read more
More
$63.65
- Compare At:
-
$81.36
- You Save:
-
$17.71
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813660
This door switch detects whether the appliance door is open or closed. A working switch lets the machine start when the door is fully shut and stops operation when the door opens for safety.
- Monitors door position and allows the cycle to run only when closed
- Interrupts power to stop operation when the door opens
- Common symptoms of a failing switch: appliance won't start with the door closed, must press/hold the door to run, interior light stuck on/off, or a "door open" message on models with a display
What's included: 1 door switch Install notes:
- Disconnect power to the appliance before servicing
- Access the switch at the door opening/front panel; release mounting screws or locking tabs and remove the switch
- Move wires to the new switch one at a time to maintain correct positions
- After reassembly, test switch operation before running a cycle
Do-It-Yourself Stories from Customers like You
Open door Carlos R. • Yonkers , NY • January 16, 2018
Replacing door switch.
Read more
More
$16.58
- Compare At:
-
$19.73
- You Save:
-
$3.15
Genuine Whirlpool part
By: Whirlpool
Part Number: W11036551
This is a small electrical switch mounted near the dryer door opening that detects whether the door is open or closed. It completes the circuit that allows the dryer to run when the door is shut. Replace this switch if your dryer won't start, stops mid-cycle, or runs with the door open.
Do-It-Yourself Stories from Customers like You
Problem started with dryer not getting hot and eventually shutting off within 5 minutes of operation. Meynardo G. • Orange Park , FL • March 22, 2022
I used Google and YouTube to search for troubleshooting videos and ordered the parts through AppliancePartsPros.com. I watched the repair videos on parts replacement and found it very helpful. Got it done in about an hour and tested it. It works!!!!!
Read more
More
$48.46
- Compare At:
-
$58.15
- You Save:
-
$9.69