Small Engine Start Switch Parts
Bestselling
Price High to Low
Price Low to High
By: Whirlpool
Part Number: WP74008248
Burner won't heat or dual-ring stops working? This dual infinite switch restores power control to both circuits of your cooktop element. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
I was hanging a light above the cooktop and put my foot on the edge of the glass and my wife heard the glass snap Robert C. • Lyman , WY • February 04, 2017
I looked up the parts on appliancepartspros.com, made the order, and was amazed how fast the parts arrived! I was able to watch their repair video and it showed me how to change it step by step.
Read more
More
$63.65
Compare At:
$81.36
You Save:
$17.71
By: Frigidaire
Part Number: 5304528828
Fix intermittent burner failures or electrical issues with this range wiring harness. Restores power flow when connections are loose, burnt, or broken.
More
$80.95
Compare At:
$95.52
You Save:
$14.57
By: Whirlpool
Part Number: WP4456901
Fix sparking or non-working igniter switches with a new switch harness. Connects control switches to cooktop wiring. Moderate DIY repair, 1-2 hours.
Do-It-Yourself Stories from Customers like You
Igniter not working. Adrian H. • Totowa , NJ • January 18, 2022
Replaced the Spark Module and the Wire Harness. Works like new.
Read more
More
$117.54
Compare At:
$138.70
You Save:
$21.16
By: Whirlpool
Part Number: WPW10192994
This replacement switch restores reliable on/off control for the specific function it serves in your appliance. A failing switch can cause that feature to stop responding or behave intermittently; replacing it brings normal operation back.
Opens and closes the electrical circuit to the associated component when actuated Provides consistent, safe control of the feature it operates Typical failure symptoms: function won't turn on, won't turn off, or works only intermittently Physical clues can include a loose or sticky actuator, heat discoloration, or visible arcing damage What's included: 1 switch Install notes:
Disconnect power at the breaker before servicing; allow hot surfaces to cool Access the switch per your model's service/parts diagram and note wire positions Transfer wires one at a time to the new switch; secure any mounting hardware Verify continuity and test operation before reassembly; replace any damaged connectors
Do-It-Yourself Stories from Customers like You
Washer would not start running thought door was open C. D. • Austin , TX • April 28, 2017
This switch fixed a very frustrating problem, 75% of the time the washer refused to run because it "thought" the door was open. Replacing the switch was a very easy, in expensive, 5-min fix. The washer runs like new.
When taking off the gasket, there is a metal ring that holds the gasket in place. It is connected by a spring. Find the spring, put a flat head screwdriver between the spring and the gasket and pull the ring off. The gasket will then peel back, giving you access to the switch and...
Read more
More
$36.95
Compare At:
$43.97
You Save:
$7.02
Do you need help?
Get Questions Answered Instantly.
By: Whirlpool
Part Number: WPY704512
If your gas burner won't light or clicks continuously, this igniter switch mounts on the valve stem to restore reliable ignition. Takes 5 minutes to replace.
Do-It-Yourself Stories from Customers like You
Front right burner would not light all other burners worked fine Kurt Z. • Austin , TX • February 06, 2015
By replacing the switch, the front right burner correctly turned on the igniter and worked. Repair took about 5 minutes. Very easy to do.
Read more
More
$64.70
Compare At:
$76.99
You Save:
$12.29
By: Whirlpool
Part Number: WP22004243
Washer won't start or spin? A faulty lid switch prevents operation when the lid position isn't detected. Simple clip-in replacement, typically done in 10 minutes.
Do-It-Yourself Stories from Customers like You
The washer quit working Andrew S. • Franklinville , NY • March 27, 2014
Took off the back of the top pushed the switch forward and lifted it out after I unplugged it. Put the new switch in the opposite of how I took it out, plugged in the wires put the back on and finished my laundry.
Read more
More
$75.95
Compare At:
$90.38
You Save:
$14.43
By: Bosch
Part Number: 00499500
This pressure chamber is part of the water level sensing system in the dishwasher. It connects to the tub and the water level sensor, using air pressure changes to detect how much water has filled the machine so it knows when to stop filling. Replace this component if the dishwasher overfills, underfills, or displays water level error codes during a wash cycle.
Do-It-Yourself Stories from Customers like You
Internal water leak on a bosch shu5316 uc/06 dishwasher David B. • Aspinwall , PA • March 13, 2015
Using instructions I obtained over the internet, I first removed the DW's bottom cover panels so I could look inside the DW (with a flashlight) while it was running. I had to put their dishwasher through several wash cycles before I could pinpoint the location of the leak. (The water appeared to be coming from above on the left side of the DW, near the top, rear of the DW's blue "Pressure Chamber." Thinking that the problem likely lay in either a malfunctioning Pressure Chamber or in a...
Read more
More
$60.55
Compare At:
$72.66
You Save:
$12.11
By: Whirlpool
Part Number: 12002792
Burner won't spark or ignite? This surface burner ignition switch triggers the spark module when you turn the knob. 45-minute DIY repair for ranges.
Do-It-Yourself Stories from Customers like You
Igniter switch shorted out Jeff J. • Hoffman Estates , IL • October 11, 2016
Replaced switch assembly
Read more
More
$102.32
Compare At:
$120.74
You Save:
$18.42
By: Frigidaire
Part Number: 5304482236
If your hood won't turn on or respond to controls, this switch may have failed. Requires removing the grease filter and lower pan to access and replace.
More
$125.95
Compare At:
$151.14
You Save:
$25.19
By: Whirlpool
Part Number: WP74009254
The fan control switch is the panel-mounted switch that sends power to the appliance's fan motor. Replacing a worn switch restores reliable on/off control and proper airflow so the fan starts and stops when it should.
Provides user-operated on/off power to the fan/blower motor Helps regulate airflow for cooling, venting, or convection depending on model Typical symptoms: fan won't run, runs continuously, intermittent operation, or a loose/broken switch shaft Mounts behind the control panel and is actuated by the exterior knob/lever What's included: One fan control switch Install notes:
Disconnect power at the breaker before servicing Remove the control knob/actuator and panel trim to access the switch Note wire positions or take a photo; transfer wires one at a time to the new switch Secure with the original hardware, restore power, and test operation
Do-It-Yourself Stories from Customers like You
The fan switch on our jenn air cooktop broke Jonathan B. • Bend , OR • March 29, 2015
After looking at several YouTube videos that were only moderately helpful for my particular model, I disconnected the power at the breaker, disconnected the wires below the cooktop to the junction boxed lifted the whole unit out, including the fan assembly. I flipped it upside down and took off the screws holding the unit to the glass top. Although the new fan switch did not look the same as the original switch, the new switch does fit. The new switch did not come with a hex nut. The old hex...
Read more
More
$135.31
Compare At:
$162.37
You Save:
$27.06
By: Whirlpool
Part Number: WPW10268911
Washer overfilling or underfilling? The water level pressure switch senses tub pressure to control fill cycles. DIY repair in 20 minutes or less.
Do-It-Yourself Stories from Customers like You
My washer was overfilling Steve T. • Warwick , NY • January 25, 2016
Called appliance parts and asked, what was the fix. Told it was fill switch and that I could order it.
I was amazed that I received the part the next day without even asking for overnight delivery. I installed the part in less then 20 min. Problem fixed..
Read more
More
$111.44
Compare At:
$133.73
You Save:
$22.29
By: Whirlpool
Part Number: W10702726
Dryer won't start but lights work? A faulty door switch prevents operation. This replacement switch restores normal function in under 10 minutes.
Do-It-Yourself Stories from Customers like You
Broken door switch Jason D. • Troy , IL • March 23, 2019
Ordered replacement, easy swap out. Less than 10 minutes.
Read more
More
$60.52
Compare At:
$71.41
You Save:
$10.89
Shop With Confidence
Over 15 million customers served!
By: Bosch
Part Number: 00166635
Wax motor for detergent/rinse-aid dispenser.
Do-It-Yourself Stories from Customers like You
Soap dispenser door wouldn't open David H. • San Francisco , CA • May 15, 2015
Took door off, saw that dispenser linkage was ok, I could open and close by hand, so figured the wax motor or the wiring to it were most likely the problem. I took off the wax motor ( actuator) and ran 120 volts to it via jumper wires, and it did not move at all, so figured good chance that was the problem. Found part # on your site, received new one quickly from you, put it in and works great. Thanks.
Read more
More
$29.68
Compare At:
$35.32
You Save:
$5.64
By: Frigidaire
Part Number: 134813660
This door switch detects whether the appliance door is open or closed. A working switch lets the machine start when the door is fully shut and stops operation when the door opens for safety.
Monitors door position and allows the cycle to run only when closed Interrupts power to stop operation when the door opens Common symptoms of a failing switch: appliance won't start with the door closed, must press/hold the door to run, interior light stuck on/off, or a "door open" message on models with a display What's included: 1 door switch Install notes:
Disconnect power to the appliance before servicing Access the switch at the door opening/front panel; release mounting screws or locking tabs and remove the switch Move wires to the new switch one at a time to maintain correct positions After reassembly, test switch operation before running a cycle
Do-It-Yourself Stories from Customers like You
Open door Carlos R. • Yonkers , NY • January 16, 2018
Replacing door switch.
Read more
More
$18.29
Compare At:
$21.95
You Save:
$3.66
By: Lg
Part Number: 0CZZJB2014G
This capacitor stores and releases electrical energy to support the appliance's circuit during startup and operation. Replacing a weakened capacitor can restore reliable performance and reduce humming, hard starting, or stalling in the affected component.
Provides a power boost at startup and helps stabilize voltage during operation Helps the connected component start promptly and operate smoothly under load Common failure signs include humming, slow or no start, or intermittent operation Contribute to overheating or a tripped breaker/fuse when the component tries to start What's included: One capacitor. Install notes:
Disconnect power at the breaker or unplug the appliance. Before handling, safely discharge the old capacitor using a proper resistor-rated tool. Photograph or note wire positions; move each lead to the same-labeled terminal on the new capacitor and ensure snug connections. Mount the capacitor securely in its bracket; keep terminals covered and clear of metal surfaces.
Do-It-Yourself Stories from Customers like You
Loud clicking from the back of my refrigerator Randy W. • Granbury , TX • March 04, 2015
Research question lead to others that had the same issue. Consensus lead to a common repair. Compressor overload switch going bad. After ordering the correct parts, I changed out both the switch and the motor start capacitor just in case. After cleaning the equipment, I then put everything back together. Results were, clicking gone, seems to be quieter operation because of cleaning, more efficient cooling and nerves calmed.
Read more
More
$43.79
Compare At:
$52.11
You Save:
$8.32
By: Frigidaire
Part Number: 5304524331
Interior light stays on or won't turn on? This upright freezer door switch controls lighting when the door opens and closes. Simple fix for most DIYers.
More
$57.39
Compare At:
$68.87
You Save:
$11.48