Run Vent User Control Display Board Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10769823
Range won't heat or display is blank? The electronic control board coordinates all oven functions. DIY replacement in 10-30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Electronic oven control unit went out Gary R. • Louisville , KY • April 30, 2016
Oven is a slide in. I pulled it out just a
Few inches and removed 8 screws and
Pulled the face down to expose the unit.
The control unit had 4 screws and 4
Plugins. It only took me less than 10
Minutes to replace unit and slide back
In place.
Read more
More
Genuine Ge part
By: Ge
Part Number: WH12X950
Fix a washer that won't advance through cycles or stops mid-cycle. This timer controls cycle duration and sequencing in your washer dryer combo unit.
Do-It-Yourself Stories from Customers like You
Washer would not drain L. H. • Jackson , MS • May 20, 2019
Replace timer; remove lid switch
Read more
More
Genuine Ge part
By: Ge
Part Number: WR55X10775
Fix a refrigerator that won't cool or has a non-working dispenser. This main control board regulates temperature and functions. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Intermittent malfunction of front water/cube dispenser on our 13yr old ge cafe refrigerator after several months of inconsistent dispenser performance i searched videos of ge refrigerator problems Pete R. • Dagsboro , DE • October 23, 2022
After searching refrigerator videos of related problems I found AppliancePartsPros.com and inquired about replacing the Dispenser Assembly board on the front door. During the several-month malfunction period, the freezer and refrigerator were working before they finally stopped. That lead to a discussion with an APP customer rep who asked me to describe the problem and then reviewed their log of prior customer reviews & Fixit comments with me. We uncovered a description of identical issues in...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR55X10859
Fix unresponsive ice or water dispenser buttons with this control touchpad. Simple 15-minute snap-in replacement—disconnect power, unsnap old part, reconnect wires.
Do-It-Yourself Stories from Customers like You
The control surface of the ice/water dipensor assmebly was badly scrathched and worn out making the refrigerator look older than it is Jamshid R. • Manchester , NJ • December 16, 2016
Using the model number of the frig, I located the part (Interface Dispenser Asm) on the AppliancePartsPros.com. After reading the Q&A section for hints on how to change the part and looking at a couple of YouTube videos, it seemed that I was up to the task. I placed the order for the part and was pleasantly surprised that it arrived in a couple of days. Armed with a flat blade screwdriver and an old credit card, it took me about 15 minutes to first remove the bezel around the ice dispenser...
Read more
More
Genuine Lg part
By: Lg
Part Number: 5215EA3003A
The Hose Assembly & Connector is an OEM part for LG washing machines. This assembly includes the hose and connector, which are essential for supplying water to the washer during operation, ensuring a steady and reliable flow.
Causes of a bad hose assembly and connector can include wear and tear over time, cracks or splits due to pressure or temperature changes, and damage from improper installation or handling.
Symptoms of a bad Hose Assembly & Connector include:
- Water leaks from the hose or connector
- Low water pressure or flow to the washer
- Visible cracks or splits on the hose
- Water not entering the washing machine properly
This OEM LG part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
Kick clog error code Darin D. • Odessa , WA • May 05, 2016
Checked all hoses for clogs cleaned them out and problem still existed so it was time for a new pump and since I was in there I replaced the drain hoses as well. Pump and hoses were exact oem replacement parts project took 30 minutes and the wife was happy again!!!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 5701M760-60
Oven won't heat, display blank, or controls unresponsive? Replace the electronic control board. DIY-friendly repair, typically 30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Oven will not heat or self clean John G. • Leicester , NC • October 09, 2014
Replaced with part No.AP4417276 electronic control board that we ordered from you and replaced it ourselves with your professional assistance. This has been an excellent experience with your company, and your return policy.
Thank you .
Read more
More
Genuine Lg part
By: Lg
Part Number: EAM60991316
This is an electronic noise filter assembly that mounts on the dishwasher's power supply line. It suppresses electromagnetic interference generated by the dishwasher's motor and electronic controls, preventing it from affecting other appliances or electronics on the same circuit. Replace this part if the dishwasher trips breakers, fails to power on, or if you notice electrical interference with nearby devices when the dishwasher is running.
Do-It-Yourself Stories from Customers like You
No power. Semso M. • Tucker , GA • January 18, 2021
Replaced noise filter.
Read more
More
By: Pro
Part Number: TJ725RBFFP
Replacement water fill hoses for washing machines. Connect home water supply to washer. Replace when cracked, leaking, or showing rubber wear or corrosion.
Do-It-Yourself Stories from Customers like You
Washer would not spin nor adgitate Jeff A. • Stow , OH • June 28, 2015
Motor control board was flashing 4 times, indicating that the mode shifter had an error. I disconnected the mode shifter's wire from the controller and measured the resistance between the 2 leads with an ohmmeter. Since the reading was infinite, that meant that the mode shifter coil or in-line thermal sensor was electrically open, i.e. bad. As this fix is near a complete tear-down of the washing machine, here are a few tips I discovered. 1) the hub nut is difficult to remove and you need a...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001252
Fix a washer that won't advance through cycles, stops mid-wash, or skips stages. This mechanical timer controls wash, rinse, and spin sequences.
Do-It-Yourself Stories from Customers like You
10+ year old bad washing machine timer Johnny Q. • Philadelphia , PA • January 18, 2015
Took out old timer, and upon inspection notice some electrical arcing( burned areas). I installed new timer and worked perfectly.
Problem was that it would fill up with water, but after it was filled the timer kept going but washer was not agitating. Only thing that worked was delicates wash.
Important Disconnect/ unplug power cord!
1. Remove knob, center cap pops off revealing a pin. Slide that off and the knob should come off.
2. Removing knob should reveal 2 socket screws remove...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP5760M302-60
This electronic control board with overlay manages your range or wall oven's heating and user interface. Replacing a failing control restores accurate temperature regulation, proper bake/broil operation, and a readable display so the appliance responds as it should.
- Regulates oven heat by switching bake/broil circuits based on temperature sensor feedback
- Powers and displays the clock, timer, and status messages
- Interprets keypad/touchpad inputs to run bake, broil, and clean cycles
- Common failure symptoms: dark or flickering display, unresponsive buttons, oven won't start or maintain set temperature, or error codes
What's included: Electronic control board and matching faceplate overlay
- Disconnect power at the breaker before servicing; verify no voltage present
- Use ESD precautions and handle the board by its edges
- Photograph/label wiring; move connectors one at a time to the new board and seat fully
- After installation, run any model-specific checks or calibrations per the service/tech sheet
Do-It-Yourself Stories from Customers like You
The oven was not staying up to set temperature Pat M. • Kansas City , MO • December 05, 2023
I first tested and replaced the temperature sensor. Since this is a slide-in range, I managed to pull it out just enough to access the back without disconnecting the downdraft and gas line. (For wall models this would not be the case.) Unfortunately, that did not do it. Next I replaced the lower heating element because it was a little below the ohms level it should be at. No go. So far, both of these were pretty easy to do and were relatively inexpensive so I wasn't too frustrated. Then I...
Read more
More
Genuine Lg part
By: Lg
Part Number: 5214ER4001J
This inlet hose routes incoming water from the washer's fill valve into the machine to support proper filling. Replace a cracked or leaking hose to stop drips, prevent water damage, and restore reliable fill performance.
- Directs incoming water from the fill valve to the dispenser/tub during wash cycles
- Maintains a sealed path to prevent internal or external leaks
- Helps the washer reach proper fill levels and timing
- Common symptoms of failure: water on the floor, leaks during fill, visible cracks or bulges, long/no fill or IE error
What's included: 1 inlet hose Install notes:
- Unplug the washer and turn off both hot and cold water supplies
- Keep towels or a pan handy; relieve residual water pressure before disconnecting
- Note the original routing; fully seat the hose on fittings and secure with existing clamps
- Restore water and power, then run a quick fill to check for leaks
Do-It-Yourself Stories from Customers like You
Little black specks in the dispenser tray calicum build up and rusted clamps on rear of dispenser Paul B. • San Diego , CA • January 30, 2017
I figured after 10.5 years that it might be time to replace the dispenser hoses because I was noticing black stuff in the dispenser trays. I replaced two or the four hoses and clamps on the far left side and for good measure the hot water inlet valve. The inlet valve was okay but the screen had all kinds of crap in there that I couldn't clean out so now I have an extra solenoid just in case one of the others fails. While I was at it I removed the dispenser and cleaned the calcium build up on...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10861510
White control panel console for washers. Mounts on top back area and houses display buttons. Replace if cracked, broken, or buttons unresponsive.
Do-It-Yourself Stories from Customers like You
Fixed fast and at a great price Charles M. • Cleveland , TN • May 02, 2025
Replaced UI console
Read more
More
Genuine Ge part
By: Ge
Part Number: WD12X10353
Dishes not getting clean in the upper rack? A worn middle spray arm hub prevents proper rotation and water distribution. DIY fix in 15 minutes.
Do-It-Yourself Stories from Customers like You
Dishes were not getting clean; i noticed that the middle spray arm was not working; but also other spray arms appeared to have residue in the irrigation holes Margaret O. • University Heights , OH • November 08, 2014
I did an internet search - found your site explaining how to fix. I purchased the upper, middle, and lower spray arms - It took about 15 minutes total. Very very easy. No more dirty dishes!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67003000
Freezer not cooling or running constantly? This mechanical temperature control thermostat regulates freezer temps. DIY-friendly repair in under an hour.
Do-It-Yourself Stories from Customers like You
Erratic/warm temps sometimes worked fine but not reliably Jennifer C. • Plainville , MA • June 15, 2015
My fridge was often reaching 60-70 degrees but would work well when motor/fans were running; it just wasn't cooling regularly. I checked the coils, defrost, damper, and fans, and they all seemed to work, so that only left the cold control in terms of what I was willing to try to fix. (It wasn't worth messing with the compressor as the fridge is 12 yrs old.) The fridge would sometimes kick on when I tapped the cold control knob so it was a reasonable - and, it turns out, correct - guess.
I...
Read more
More
Genuine Speed Queen part
By: Speed Queen
Part Number: 36878
Connects your washer's drain hose to household standpipe for a secure fit. Replace if cracked, loose, or missing to prevent hose movement during drainage.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10740217
Fix a non-cooling refrigerator, blank display, or non-dispensing ice/water. This electronic control board restores temperature and dispenser functions.
Do-It-Yourself Stories from Customers like You
Flashing lights on motherboard Patricia K. • Shiloh , IL • January 27, 2017
Replaced new motherboard and face plate.
Read more
More