Power Strike Small Engine Regular Starter Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491583
This controller kit is the appliance's main electronic control. It reads inputs from the user interface and sensors to power and coordinate key components. Replacing a failed controller restores responsive controls and consistent, reliable operation.
- Interprets commands from the keypad and sensors to manage operation
- Controls relays powering motors, fans, compressor, or valves as designed
- Coordinates modes and cycle timing for proper performance
- Common symptoms: dead or blank display, unresponsive buttons, won't start, intermittent shutdowns, or error codes
What's included: 1 controller kit Installation notes:
- Disconnect power at the breaker or unplug the appliance before servicing
- Handle the board with ESD precautions; avoid touching connectors and components
- Photograph/label wire connections and transfer them one at a time to the new board
- After installation, verify any model-specific settings per the service documentation before testing
Do-It-Yourself Stories from Customers like You
Feezor would not run Russell B. • Groton , CT • February 15, 2016
Replaced controller and starter relay
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8201769
Refrigerator not cooling or compressor running hot? This start device kit includes relay and overload to restore proper compressor function. DIY install.
Do-It-Yourself Stories from Customers like You
No cooling and no hum from compressor when plugged in Collin H. • Quincy , WA • October 23, 2014
I suspected the start-relay and tested it due to the lint plugged condenser coils. The start-relay rattled when shook, a telling sign it is no good due to over heating. I tested the compressor terminals and compared them the results with the Tech Data Sheet found with the unit, to find my compressor was still good. I checked the start capacitor with a capacitor tester, comparing the results with the rating printed on the side of the capacitor and found it to be good. I cleaned the condenser...
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DC97-08889A
The Dryer Guide Sensor Assembly is designed to ensure precise drying cycles in your Samsung dryer. This genuine OEM part guarantees compatibility and reliable performance, maintaining your dryer's efficiency. Featuring a high-quality assembly, it accurately monitors moisture levels, helping to prevent over-drying and reduce energy consumption. Installing the Dryer Guide Sensor Assembly enhances the lifespan of your appliance by ensuring optimal operation. Whether you're replacing a worn-out sensor or repairing your dryer, this component provides a seamless fit and easy installation. Trust in the Dryer Guide Sensor Assembly to deliver consistent drying results, improving your overall laundry experience. Compatible with a range of Samsung dryer models, this genuine OEM part is the perfect solution for maintaining your appliance's functionality and performance.
This part fixes the following symptoms
-
Takes too long to dry
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Will not run Ernest P. • Valley Cottage , NY • May 23, 2015
Replaced blown thermal fuse and while I had the dryer opened, I also replaced the thermistor & thermostat. I ordered the parts from appliancepartspro.com that were shipped within 24 hours. Dryer is now working again.
Read more
More
Genuine Ge part
By: Ge
Part Number: WE04X10094
This thermal limiter is a safety fuse designed to protect the dryer from overheating by cutting off power to the heating element if temperatures exceed safe limits. It is typically mounted on or near the heating element housing. Replace this part if the dryer is not heating at all, as a blown thermal limiter is a common cause of no-heat conditions often triggered by restricted airflow or a clogged vent.
Do-It-Yourself Stories from Customers like You
Belt jumped off idler did not trip belt switch at first thermal limiter shut dryer down Bill M. • Bradenton , FL • January 16, 2017
REPLACED BELT AND IDLER. TESTED AND FOUND THERMAL LIMITER BLOWN SO REPLACED IT. DRYER WORKS GOOD
Read more
More
Genuine Ge part
By: Ge
Part Number: WE4M127
Fix a dryer that won't heat, overheats, or runs too long. This thermostat cycles the heating element to maintain safe drying temperatures.
More
Genuine Ge part
By: Ge
Part Number: WE4X800
Fixes dryer not heating or overheating issues. This safety thermostat monitors temperature and cuts power when too hot. Basic DIY repair, 30 minutes.
Do-It-Yourself Stories from Customers like You
No heat in the dryer Randy C. • Bethlehem , PA • April 09, 2017
With a screwdriver and some mechanical aptitude. Nothing harder that a few screws to change the parts.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002837
Fix a dishwasher door that won't open or close properly with this door latch handle. Simple DIY repair, typically completed in 10-15 minutes.
Do-It-Yourself Stories from Customers like You
Door handle on 2002 model maytag dishwasher broken Thomas H. • Fort Worth , TX • October 17, 2014
I called a local repair center who estimated $300+ to fix this. I bought a door handle and door latch for $~100 and fixed my dishwasher in about 10 mins. I ordered the parts on Sunday, they arrived on Tuesday. Very happy with appliance parts pros and would recommend them.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10017410
This time-delay fuse protects the appliance's power circuit by opening when current exceeds a safe level while tolerating brief inrush current. Replacing a blown fuse can help restore power once the root cause is corrected. What it does:
- Protects the line and control circuits from shorts and overloads
- Time-delay design helps prevent nuisance opening during startup surges
- When open, the unit will be completely dead—no display, lights, or response
- Repeatedly opening usually indicates an unresolved electrical fault that needs diagnosis
What's included:
Install notes:
- Disconnect power at the breaker before servicing; some appliances can retain dangerous high voltage
- Replace only with the same type and rating specified by the manufacturer
- Inspect the fuse holder and wiring for heat damage or loose connections before reassembly
- If the new fuse opens immediately, stop and diagnose the underlying cause; never bypass or upsize a fuse
Do-It-Yourself Stories from Customers like You
Microwave stated ‘door open’ and would not work. Margo D. • Tarpley , TX • March 17, 2019
I read up on others with this problem of microwave-wall oven combination Whirlpool Gold. We live in a very rural area and were not able to get ANYONE to service it - had 2 companies come out to inspect but they never returned. I have wonderful news! We replaced the fuse, bus fuse, and light bulb (quit working 2 years ago) and all is working. Thanks for the information and for the part diagram. Couldn't have done it without you.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR07X10097
Fix clicking sounds and warm temps with this start relay and overload protector. Controls compressor start-up and prevents overheating. 15-minute DIY fix.
Do-It-Yourself Stories from Customers like You
Would not run led dimmed condenser fan would not run Pete M. • Santa Fe , NM • May 16, 2015
We replaced the main circuit board and the LED started to work and the condenser fan worked, but all we had were relay clicking sounds, but no cooling. The compressor had become so hot trying to work when the main circuit board was amiss, that it had popped the over temperature sensor on its side. As some one point out, if you remove the PTC+OLP assembly with the capacitor on it, and shake it, you will hear a rattle inside---and that is bad. We ordered a second round of parts from...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304490142
Microwave won't start or stops mid-cycle? A broken left door latch prevents proper door closure and engagement. Moderately difficult repair with panel removal.
Do-It-Yourself Stories from Customers like You
Right latch broke Eric M. • Minnetonka , MN • March 31, 2018
Ordered the left and right latch, took off the trim ring, unscrewed the door face and removed it, replaced the latches and I was done! The reason these parts are so expensive is because they are METAL, not the cheap original plastic.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491942
Refrigerator not cooling but running? This compressor start relay and overload kit fixes weak or failed start components. DIY repair in 20 minutes.
Do-It-Yourself Stories from Customers like You
Bad start relay David S. • Knoxville , TN • July 12, 2015
Wake up the morning after a big fourth-of-July cookout to find the refrigerator is running, but not cooling any more. Wife is mad, food is spoiling, and the kitchen is littered with every cooler in the house. No repair person can come by to look at the refrigerator for at least five days. I narrow down the problem to the start relay and I was able to find the exact part on AppliancePartsPros.
With two-day shipping, I get the part fast, and the kit came with everything I need (and then...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491944
This kit includes the electrical components needed to start your refrigerator's compressor motor, including both the start relay and overload protector. These parts work together to provide the initial electrical boost needed to start the compressor and protect it from electrical overload. Replace this kit if your refrigerator isn't cooling, makes clicking noises, or if the compressor won't start.
Do-It-Yourself Stories from Customers like You
Smelled bad all of a sudden Austin K. • Chowchilla , CA • May 10, 2014
The smell was bad. Burnt wires but smelled like it could be a critter. Saw that the starter relay smoked after a cycle. Ordered the part.(sunday). Part recieved on Monday. Installed in less than ten minutes. Wife was happy. Also the website had a video of how to replace the part. Very satisfied??
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11036551
This is a small electrical switch mounted near the dryer door opening that detects whether the door is open or closed. It completes the circuit that allows the dryer to run when the door is shut. Replace this switch if your dryer won't start, stops mid-cycle, or runs with the door open.
Do-It-Yourself Stories from Customers like You
Problem started with dryer not getting hot and eventually shutting off within 5 minutes of operation. Meynardo G. • Orange Park , FL • March 22, 2022
I used Google and YouTube to search for troubleshooting videos and ordered the parts through AppliancePartsPros.com. I watched the repair videos on parts replacement and found it very helpful. Got it done in about an hour and tested it. It works!!!!!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9760588
Oven light won't turn on? This light transformer steps down voltage to power your oven cavity lights. Moderate DIY repair restores illumination.
Do-It-Yourself Stories from Customers like You
Double oven would not work correctly/runaway high temp cycle (control board problem) also oven lights would not come on. David S. • Hartwell , GA • June 19, 2023
Studied schematics and watched many on-line videos. Did some electrical checks with VOM (Volt/Ohm Meter). Determined that control panel thermal fuse attached to back of control panel had opened due to high temp. Determined that the upper oven thermal fuse on back of oven had opened due to high temp. Determined that transformer that supplies power to lights was bad (open primary).
Removed control panel circuit board and had it repaired/verified good. Faulty control panel was the reason that oven...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304406099
This safety thermostat is a temperature-sensitive switch that helps protect your appliance from overheating. When excessive heat is detected, it opens the circuit to stop power to critical components, helping prevent damage and ensuring safe operation.
- Monitors temperature at a specific location and interrupts power if it exceeds a safe limit
- Can cause no power, no heat, or shutdown during use when failed or tripped
- Helps prevent overheating damage to internal components
- Restores normal operation when replaced
What's included: Safety thermostat only. Install notes:
- Disconnect power to the appliance before service
- Note wire positions and terminal orientation before removal
- Use proper tools and avoid bending or stressing terminals
- After installation, check for underlying overheating causes (blocked airflow, failed fan, etc.)
More
Genuine Ge part
By: Ge
Part Number: WB14T10069
Fix a locked door error or F9 code with this oven door latch. Restores proper door locking and prevents interrupted cycles. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Get stove door lock would not release after self clean motor was hot and getting 120v Nicholas B. • Charlotte , NC • October 10, 2015
Lifted top and removed old motor and replaced.
Read more
More