Power Strike Small Engine Start Switch Parts
Genuine Lg part
By: Lg
Part Number: 6600JB3007K
Refrigerator light won't turn off when door closes? This door switch controls interior lighting based on door position. Simple DIY repair.
This part fixes the following symptoms
-
Light not working
-
Not dispensing water
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Lights on refrigerator stayed on. Sue L. • Boise , ID • July 05, 2020
Ordered 2 light switches and replaced them.
Read more
More
$34.75
- Compare At:
-
$41.35
- You Save:
-
$6.60
Genuine Frigidaire part
By: Frigidaire
Part Number: 218909912
Freezer won't start or compressor hums but doesn't run? A failed run capacitor is often the cause. DIY-friendly repair, typically done in under an hour.
This part fixes the following symptoms
-
Won't start
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Freezer would not start Thomas C. • Oxford , GA • October 03, 2014
Looked for obvious signs of mal-function, burned wires, etc. I found that the compressor controller(attached to the compressor) had an obvious burned-out spot. Took a chance that was the problem (it was); ordered all new OEM parts, including a new timer and run capacitor (a part that kicks in every time the compressor starts). I received the parts at 1 PM EST; by 1:48 PM I had the freezer working. Easily saved $250.00. A nice aside was that an Internet competitor was asking $53.00 for the same...
Read more
More
$64.95
- Compare At:
-
$77.29
- You Save:
-
$12.34
Genuine Ge part
By: Ge
Part Number: WB24X29364
Burner stuck on high or can't regulate heat? This infinite switch controls cooktop element temperature. DIY-friendly repair in under an hour.
Do-It-Yourself Stories from Customers like You
Element temperature would only work on high and there was no adjustment to the heat Joann S. • Lennox , SD • October 26, 2015
Ordered the element control for my dual front right burner and a infinite heat switch for my left front large single burner. Removed cooktop and followed the instructions video given with the parts online. Process was simple and everything on my cooktop is working like it is brand new. The only problem I have is with the online chat, save time by calling in and talking to someone as the people I talked to online (4 of them) are in such a hurry to get to the next call they gave conflicting part...
Read more
More
$81.66
- Compare At:
-
$97.18
- You Save:
-
$15.52
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10285518
Fix a washer that won't advance through cycles or gets stuck between wash and rinse. This cycle switch controls your wash sequence. DIY repair.
Do-It-Yourself Stories from Customers like You
Only hot water no matter what setting Jane D. • Newport , RI • June 23, 2025
Ordered the right part, took the back off the top control panel, and popped it in.
Read more
More
$76.95
- Compare At:
-
$91.57
- You Save:
-
$14.62
Genuine Whirlpool part
By: Whirlpool
Part Number: WP37001136
This cycling thermostat regulates exhaust temperature by switching the heater on and off to maintain proper drying heat. Replacing a failed thermostat restores consistent temperatures, helps auto-dry timing, and protects against fabric-damaging overheating.
- Controls the heating circuit to maintain target drying temperatures
- Provides temperature feedback for accurate auto-dry operation
- Common symptoms: long dry times, very hot drum/cabinet or scorching odors, auto-dry not advancing correctly, or no heat if the thermostat fails open
- Typically mounted on the blower housing to sense exhaust air temperature
Includes: 1 cycling thermostat. Install notes:
- Disconnect power; for gas dryers, also shut off the gas supply
- Access the thermostat (commonly on the blower housing); remove the necessary panel(s)
- Transfer wires one at a time to the new thermostat and mount it flat against the housing
- Reassemble, verify clear venting/airflow, and run a test cycle
Do-It-Yourself Stories from Customers like You
Heat was too high Douglas S. • Mesa , AZ • May 17, 2015
I went ahead and ordered the element, and the 2 different thermostats not knowing exactly which one might be the problem. My My Maytag opens from the front and it was actually pretty easy to get into. Also gave me the opportunity to vacuum out the inside of the dryer. Pop the top off, remove the wires that connect the door switch (noting the colors and placement), take off the 2 inside nuts that hols the fron on, pull it forward and lift it off, 3 inside screws to take out to inside lint part...
Read more
More
$81.71
- Compare At:
-
$97.23
- You Save:
-
$15.52
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8283288
Comes with jumper wire.
Do-It-Yourself Stories from Customers like You
Drier would not start when i set it to diagnostics code said 6e all display lights turned on Randal B. • Salt Lake City , UT • December 21, 2014
Searched internet for answers. Decided to replace the door switch. Drier now runs great!
Read more
More
$83.95
- Compare At:
-
$99.90
- You Save:
-
$15.95
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10167742
If your range burner stays on high and won't adjust temperature, the infinite switch likely failed. This control switch regulates element power levels.
Do-It-Yourself Stories from Customers like You
Burners were working correctly most of the time but would stay in the on position (high )periodically and would not shut off automatically for the temperature you set the burner for Daryl B. • Gloucester , VA • August 12, 2021
Replaced the burner Infinite switches for the burners having the issue. Here are the latest part numbers for this model Maytag. Left rear (LR) and right rear (RR) burners are both 6" and use the same switch. Part # WP3149404. Left front (LF) is an 11 1/2" burner Part# W10167742. The right front (RF) burner is a double burner 6" center and 9 1/2" outside burner Part #WPW10149355. Very simple repair. Unplug the stove, remove the rear panel, remove the switch knob, remove the 2 switch screws,...
Read more
More
$75.35
- Compare At:
-
$89.67
- You Save:
-
$14.32
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10375379
Washer won't start or shows F28 error? Door lock keeps washer secure during cycles. Moderate DIY repair, takes about 15 minutes with door boot removal.
Do-It-Yourself Stories from Customers like You
Door lock was broken Kerry K. • Clyde , TX • August 23, 2015
ORDERED IN DOOR LOCK FROM ApplianceParts .received part next day. ( Great delivery time!) went down and installed on my washer at the Laundry.Took about 15min to install. I had very little down time at my business.
Read more
More
$173.68
- Compare At:
-
$206.68
- You Save:
-
$33.00
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293825
If your burner won't turn off or stays on high heat, this surface burner switch restores proper temperature control. Straightforward 30-minute repair.
Do-It-Yourself Stories from Customers like You
My ceramic surface cooktop had a large burner that would stick in the full on setting regardless of the control position Hugh H. • Duluth , GA • August 01, 2016
I replaced the Switch for the burner. Works fine.
Read more
More
$78.95
- Compare At:
-
$93.16
- You Save:
-
$14.21
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10185286
Burner stuck on high or won't heat? This infinite switch controls electric cooktop burner temperature. Moderate DIY repair restores heat control.
Do-It-Yourself Stories from Customers like You
Right front burner was out Jimmie L. • Pelion , SC • August 29, 2016
So I ordered the burner and Ithe switch because I wasn't sure what part was defective. I pulled the oven out and I removed the 6 1/4 inch screws on each side of the glass top as well as the 2 Phillips head screws on the back, removing the 2 1/4 screws on the shield on the back gIves you easier access to them, then lifted the glass top up on the front to access the switch and burners. Make sure you turn the power off before beginning this process. When lifted up the wires connected to the...
Read more
More
$158.77
- Compare At:
-
$188.94
- You Save:
-
$30.17
Genuine Lg part
By: Lg
Part Number: 3W40025L
The Dishwasher Micro Switch is an OEM part for LG dishwashers. It plays a crucial role in detecting the door's position, ensuring the dishwasher only operates when the door is securely closed. This switch helps maintain safety and proper functioning during the wash cycle.
Causes of a bad micro switch can include wear and tear from regular use, electrical malfunctions, or physical damage. A compromised micro switch can prevent the dishwasher from starting or stopping correctly.
Symptoms of a bad dishwasher micro switch include:
- The dishwasher not starting or stopping unexpectedly
- Error codes related to door issues
- The door not locking securely during operation
- Unresponsive control panel or buttons
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Lg dishwasher “ne” or “ue” error code (vario spray arm). Dimitri T. • Cranston , RI • February 26, 2019
This was a very simple repair. It was done in about an hour. It involves disconnecting the dishwasher, emptying the water from the inside, taking it out and flipping it over, and replacing the diverter motor. This repair is done on the underside of the dishwasher, nothing to disconnect inside (just remember to remove the baskets). It would be wise to order the motor seal and micro switch that goes with it as they are all cheap parts and easy to swap out during the procedure. Be sure to take...
Read more
More
$16.75
- Compare At:
-
$19.93
- You Save:
-
$3.18
Genuine Lg part
By: Lg
Part Number: 4026EL3007A
The Door Strike is an OEM part for LG dryers. This part engages with the door catch to keep the dryer door securely closed during operation. The door strike is essential for ensuring the door remains tightly shut, allowing the dryer to function efficiently and safely.
Causes of a bad door strike can include wear and tear from regular use, damage from slamming the door, or misalignment issues that prevent it from engaging properly with the door catch.
Symptoms of a bad door strike include:
- The dryer door not staying closed
- The dryer not starting due to the door not being securely latched
- Difficulty in latching the door
- Visible damage or wear on the strike
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Dryer door latch broke Bryan G. • Happy Valley , OR • February 11, 2019
Chatted with 1 of your professionals and within a minute she had the part and it was on it's way. The job was VERY easy to fix and the part is working great!
Read more
More
$47.41
- Compare At:
-
$56.42
- You Save:
-
$9.01
Genuine Whirlpool part
By: Whirlpool
Part Number: W11445850
Fix interior lights that won't turn on or water dispenser issues with this refrigerator door switch. Easy DIY repair with video guide included.
Do-It-Yourself Stories from Customers like You
Socket and door switch for freezer not working. John M. • Westlake , LA • April 28, 2021
Replaced those two items listed above, please continue reading! I'm a mechanic by trade, so I have the basics. And what made this job easy? Appliance parts pros! very easy access to Part numbers and Diagrams, Online help, Customer service, and the list goes on. You will see several other sites, However! Wouldn't it be nice, knowing the above? Go no further! If you get stumped on anything during your Maintenance or Repair, They will Help.
Read more
More
$36.95
- Compare At:
-
$43.97
- You Save:
-
$7.02
Genuine Ge part
By: Ge
Part Number: WE04X25195
Fix a dryer that won't heat properly or overheats with this thermostat. Senses exhaust temperature to regulate heat cycles and prevent damage.
More
$20.95
- Compare At:
-
$25.14
- You Save:
-
$4.19
Genuine Ge part
By: Ge
Part Number: WE04X29714
Dryer not drying evenly or shutting off too soon? A faulty outlet thermistor causes inaccurate heat control. This sensor monitors exhaust temperature.
More
$18.95
- Compare At:
-
$22.36
- You Save:
-
$3.41
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9761048
If your dual burner is stuck on high or won't adjust temperature, this infinite switch is likely the cause. Easy DIY repair takes under an hour.
Do-It-Yourself Stories from Customers like You
Burner was stuck on high William M. • Mountaintop , PA • June 23, 2014
Replaced dual element switch.
Fixed the problem.
All is good
Read more
More
$120.56
- Compare At:
-
$144.67
- You Save:
-
$24.11